Help on Tele2, tariffs, questions

One of convenient ways clothes storage - floor hanger. You can put it at the entrance and leave your outerwear there. Other models are more suitable for bedrooms, dressing rooms, and children's rooms.

Types of floor hangers and their location

Some types of floor hangers are placed in certain rooms. For example, hangers for outerwear are placed in the hallway near the door. This is convenient: you can immediately get rid of clothes. floor hanger-the hanger stand is more universal. Such products can be placed in the hallway, in the dressing room, even in the nursery or bedroom. They accommodate a large amount of clothing and can replace a wardrobe.

Standing hangers for suits, shirts and trousers are most often “registered” in bedrooms or children’s rooms (if the child is a schoolchild). This is where we usually dress before leaving the house. Hanging chairs are also placed there. This is, in fact, one of the options for costume hangers. The legs and supports simply took the shape of the seat.

What materials are they made from?

A floor hanger is most often made of metal or wood. Both of these materials are strong, ductile, durable and relatively inexpensive. Some parts - plugs, parts of hooks - can be made of plastic.

Most often you can see floor hangers made of metal and wood

Plastic inserts are more often found on lower cost metal hangers. If the elements are not made of plastic load-bearing structure, this is not bad and you can buy such floor hangers without hesitation. If the elements are made of plastic supporting structure, better look for another model.

Metal hangers

Most big choice metal floor hangers. They are usually made from thin-walled pipes round or square section. The metal used is most often black, coated protective coating. This can be paint (most often powder coating), nickel plating, chrome plating. IN last years A new protective coating has appeared - a plastic film (PVA). This is also a good option, since the film is impermeable to moisture and air. Such products are easy to care for, since the surface is smooth and without pores.

If the floor hanger will serve to accommodate heavy winter clothes, when choosing, pay attention to the thickness of the metal. The minimum in this case is 1 mm. If the pipe wall thickness is not indicated in the product description, most likely the wall is very thin and suitable for light clothing. Indirect signs that will confirm your guesses are the weight of the product and the price.

Wooden

Wooden hangers can be carved from solid wood, or they can be prefabricated. The first option is much more expensive. Prefabricated ones are 2-3 times cheaper, but do not differ too much in appearance. The presence of joints in products of normal quality are hardly noticeable, so when limited budget It is quite possible to purchase economy class products.

Wooden floor hangers are well sanded and covered with a protective coating. Usually varnish or oil is used. The varnish creates a protective film on the surface, making it easy to care for such products. Wood oils protective film They don’t create, but they protect no worse. When treated with oil, the structure of the wood is clearly visible - all the fibers, the pattern.

Standing clothes hangers in the hallway

Floor hangers for outerwear in the hallway most often consist of a rod on which hooks for clothes of different lengths and shapes are mounted in a circular pattern at different heights. For stability, the structure is equipped with a round (rarely square) weighted base. They can be made of wood or metal.

The height of the floor stand is 150 cm and above, and the base is a circle with a diameter of 35-45 cm. In order for the hanger to be stable, you need to pay attention to the fact that the lower part is weighted. And all the same, such designs require careful attention: clothes must be hung evenly. Otherwise the hanger may fall.

There are floor hangers for outerwear of this type, but made differently. Several pipes or metal strips are bent with a certain radius. Wherein top part is smaller than the bottom one. This design is more stable, but requires more space, which is not always possible in a small hallway.

Racks for clothes hangers

Hanger-rack for clothes on hangers - convenient thing if there is not enough space in the closets. They consist of a base rectangular shape, one or two pipe-crossbars, on which hangers with clothes are hung.

Rack hangers are made of metal and wood. There are metal ones made from pipes, and there are forged ones. Some models of metal clothing racks have adjustable heights. For long clothes, their stand can be raised higher. Maximum height- 150 cm. For short clothes, you can place it at a height of 80-90 cm. This is the minimum height, and there are also intermediate positions.

In some cases, a floor hanger on wheels is useful. It is easy to move from place to place without removing the hanging clothes. There are children's models of floor hangers of this type. They differ only in height and more “cheerful” colors. Children's floor hangers can also be made of plastic. Children's clothing does not weigh that much, so the strength of plastic is more than enough. And in terms of price, plastic floor hangers are the most inexpensive.

Folding models - a solution for entertaining guests

For those who receive guests in large quantities It can be difficult to place their outerwear. For such cases, there is a folding rack for hangers for outerwear. When folded, it takes up very little space and can be stored in the pantry.

Floor hanger for suit

The problem of storing a business suit is easily solved by purchasing a special floor hanger. It is somewhat similar to racks, only with special hangers for a jacket and a crossbar for trousers.

There are suit stands made of wood, metal and plastic. Plastic in this case is not bad: a large load is not expected, so the strength of modern plastics is more than enough.

If we talk about useful options, this is a shelf or a box. It is convenient to store business small items in it: glasses, cufflinks, wallet, car keys, etc.

Floor hangers for suits are usually placed in the bedroom, in dressing room. It may be convenient to have such a device in your office. There are different models, you can choose them to suit any interior style. And some options look like designer jewelry themselves.

Hanger-chair and hanger-bedside table

There are quite unusual models of hangers. They are combined with pieces of furniture. For example, there is a hanger-chair. The models are different: with a hanger for a suit, just a hanger bar or with a rack for outerwear. For small apartments this is a very good option. It takes up the same amount of space as a regular chair or banquette, and also serves to store clothes.

Floor hanger with chair and bedside table - for full use hallway space

Another option: a bedside table with a hanger. The bottom half of this floor rack is much heavier than the top half, so it won't tip over if you hang a couple of coats. The second advantage of such furniture is the optimal use of space. The problem with all floor hangers is that the bottom 50-60 cm remain unused. This is not the case with the bedside table hanger. This is another one good way rational use of space for small hallways.

Click Class

Tell VK

Wall hanger in the hallway – important element storage of things. The layouts of many apartments have narrow corridors, in which it is not always possible to place a full-fledged closet, so the owners are looking for alternative options. I would like to preserve the design of the apartment, comfort and ease of use.
There can be a lot of variations of hangers, from the most standard and simple miniature shelves to the futuristic and most unimaginable ideas.

The most popular materials for making hangers are wood and metal.

Forged metal hangers amaze with their beauty and smoothness of shape. They are used in interiors in the Provence and Art Deco styles. This version of hangers is attached to self-tapping screws, and more often they are hung on them.

This type of hangers can be classified as horizontal. Their function is only to store outerwear. Metal hangers often have an aged appearance, which gives them a picturesque look.

A very interesting option is the combination of forged elements and leatherette or fabric. It looks unusual and luxurious. This hanger will decorate any corridor and become its highlight.

The photo shows combinations of materials: wood with fabric and metal with fabric. The functionality and uniqueness of the products has been preserved. In the first option, wood gives solidity and solidity to the furniture, and in the second, metal facilitates the composition and adds grace.

Wooden hangers can be combined with a mirror, a shelf for shoes or for head accessories. The photo shows very compact version hallway

The hanger can have sections: for short and long upper items, which helps prevent dirt on the wall.

The wooden hanger is equipped with a shelf and a mirror, as well great option for small hallways.

When choosing a material, you need to focus on its strength and whether the finished product can withstand heavy winter clothes.

For this function, you can strengthen the fastening: use not only self-tapping screws, but also furniture corners.

Materials can complement each other, carrying out their functions. Metal, being more durable, is used as the basis of the structure, and wood is used as decorative elements.

Ideas for hangers in the hallway from scrap materials

I picked up a lot of ideas when making a hanger with soul from scrap materials. This could serve as inspiration for many families. I believe that in the interior we need to move away from stereotypes, because any design is unique with its non-standard solutions.

Quite in the photo regular hanger from a piece of board made in nautical style. The matching background and anchor hooks add color to the entire hallway.

Interesting forged easy option, perhaps not entirely from scrap materials, but it has its place. A very functional and elegant option, it contains a stand for shoes and hats.

United in the shape of rhombuses, slats with wooden hooks look very environmentally friendly and stylish. Placement of hooks on different heights allows you to hang a lot of things without creating an untidy pile.

Curved leaves of thin aluminum decorate the walls in a unique way. And it will be very easy to make such a hanger at home. To do this, you can buy a sheet of thin aluminum in hardware stores. This material is easy to cut and quite pliable.

Pallet hanger is the most affordable and modern version hallway decor. Creates a loft atmosphere and is suitable for unconventional young people.

And, most importantly, it is completely environmentally friendly and strong material. Using corners and self-tapping screws, you can build a shoe stand and a shelf. You can simply coat the pallets with varnish or stain, then they will be preserved beautiful pattern wood, or you can paint it with thick colored paint to match the overall tone of the interior.

For minimalist designs, the hanger in the photo is just a godsend. Convenient without unnecessary details and looks very stylish. A rod is inserted inside, which allows you to make hangers from the hanger.

I will give a short master class on making a hanger from wooden hangers. This results in two rows of hooks. The option is unusual, but very functional.

Having slats different widths, you can create the simplest option furniture by simply drilling out hooks and adding crossbars for fastening.

For nature lovers, you can use images of animals and birds, and artificially aged wooden product will give the corridor some history.

An interesting option for combining two materials: wood and metal. Modern compact hanger with built-in hooks.

I have already come across ideas for hooks made from cutlery many times: forks and spoons, as in the bottom photo.

An interesting option for a plastic hanger for a small family. IN summer period can only serve as decoration.

DIY wooden wall hanger

To make a hanger you need to take several boards, either ready-made or purchased in a store. You can use any wood: pine, oak, birch.

Let's look at two options for hangers.

We cut out identical sidewalls, a top and a middle crossbar, to which we then need to attach the hooks.

We cut out beautiful curves on the sides and sand all the details.

We connect in finished design screws, furniture corners.

We mark the places for the hooks and drill them.

We check the finished product for strength and varnish it.

You can make an even simpler version of a clothes hanger.

The photo shows the diagram and dimensions of the future product.

We take purchased boards or slats; in this case, pine wood was used.

We measure the same distance between the vertical parts and fasten the frame from the wrong side. We drill any fasteners. The shelf will be hung with self-tapping screws.

We attach hooks to the front side at the same distance from each other. And we admire the result.

This model of hanger can be supplemented with a shelf and given contrasting colors. The photo shows an option when the crossbars go not from the wrong side, but from the front side.

Tell VK

Such hangers can be used not only for outerwear in the hallway, but also as mini-wardrobes in the room. It all depends on what type and design you choose. Rack hangers for clothes are functional, easy to move from place to place, and free the backs of chairs from unnecessary clothes.

This article contains several interesting and simple ways make a floor clothes hanger with your own hands. They won't take much time or effort.

Choose the option you like and go ahead to interior changes!

Necessary materials:

1. Two long copper pipes 3 m and 2 cm thick, each of them will need to be cut into such parts (this can be done in hardware store, where you will buy everything):

• 1.5 m long– the height of the hanger (this height should be enough for both jackets and coats, but you can take more or less as desired);
• 1 m long– the size of the pipe on which you will directly hang things (it can also be longer or shorter, calculate how many things you want to place there);
• two tubes about 20-25 cm long– we will use them to make hanger legs.

That is, it turns out 2 copper tubes 1.5 m each, 2 1 m each, 4 20-25 cm each.

• 4 copper elbow bends (tubes bent at an angle of 90 degrees) for attaching pipes to each other, match the diameter to the pipes (approximately 2 cm);
• 2 T-connectors;
• 2 pipe caps;
• Glue (epoxy glue or consult with the store salesperson which of what is available will work);

Step-by-step instruction:

Step 1: Measurements

Measure the space on the floor where the hanger will be placed to make sure it will fit. If you take the indicated dimensions, the result will be 150 cm x 100 cm x 45 cm.

TIP: Adjust dimensions if necessary.

Step 2: Assembling the hanger legs

We begin to fold the floor hanger itself from the legs, make a support and a stand. To do this, take the first pair of 20 cm tubes and attach them between a T-shaped connector, and then we do the same with the second pair.

Step 3: Attach the protective caps

To prevent dust and dirt from getting into the middle of the pipes that will serve as legs, you need to close the holes. Attach a pipe cap to each of the two legs folded in the previous step at one end.

Step 4: Base

• On tubes with caps on the other side, attach an angle in this way: when the angle is on the floor, the T-shaped connector located in the middle of the leg should be directed upward.
• Take one of the meter long pipes and insert it into the corners, now the base of the hanger is ready.

ATTENTION: To securely fix the structure, you can use glue (at least in all joints), but then the hanger cannot be disassembled and folded again (when moving, for example).

Step 5: Side Posts

Insert a one and a half meter pipe into each of the T-shaped connectors, thus forming the side posts.

Step 6: Finishing Touch

• Attach a corner to each of the newly installed racks (they should be directed towards each other), and insert a meter-long pipe into them.
• You can also attach felt pads to protect the floor. The floor hanger is ready!

Note: Because this design It can be easily disassembled (if you didn’t use glue), then you can change its length, for example, depending on the time of year: in winter there are more things - they installed longer pipes, in summer they are shorter.

Hanger made of PVC pipes (budget option)

The method of making this floor hanger is similar to the previous one: the pipes are folded like a construction set to form a hanger. But here we don’t use copper pipes, but PVC, so it will be much cheaper. And, of course, one more new idea design.

Necessary materials:

• PVC pipe 2 m long and 2.5 cm in diameter, it needs to be cut into the following parts: 12 cm (6 pieces), 80 cm (1 piece), 20 cm (2 pieces) and 10 cm (1 piece).
• PVC pipe 50 cm long and 2 cm in diameter, cut into 3 pieces of 15 cm each.
• 4 corner bends with a diameter of 2.5 cm.
• 3 corner bends with a diameter of 2 cm.
• 6 T-connectors with a diameter of 2.5 cm.
• PVC glue.
• Aerosol paint.
• 4 PVC adapters from 2.5 cm to 1.25 cm.
• 3 PVC adapters from 2.5 cm to 2 cm.
• Felt pads to protect the floor (optional).

Step-by-step instruction:

Step 1: Cut the tubes into pieces of the desired size

First of all, we have to cut the PVC pipes for rack mounting. You can do this yourself at home with a PVC cutter or ask at a hardware store.

After cutting the pipes into pieces, their edges can be sanded so as not to be scratched when assembling the hanger.

Step 2: Sorting materials

Now we have all the necessary parts and for convenience it is better to sort them, then the assembly process will be faster and more orderly. Arrange the materials in piles, depending on their purpose.

• For the hanger stand you will need: 4 corners, 4 adapters from 2.5 cm to 1.25 cm, 3 T-connectors and 6 tubes 12 cm long (diameter 2.5 cm).
• For each hand hangers: T-connector, PVC adapter from 2.5 cm to 2 cm, 15 cm PVC pipes with a diameter of 2 cm and a corner with a diameter of 2 cm (you can also put a pipe cap on it).
• For stand: one PVC tube 80 cm long, two 20 cm, one 10 cm and a cap.

Step 3: Assembling the hanger

• Stand

Secure each two tubes together with a T-connector. Insert one of the three resulting structures between the other two, as shown in the photo. Place the corners on the edges of the other two, turning them down so that the hanger stands on them.

• Hands

Place the T-connector, adapter, tube and cap together as shown in the photo.

• Rack

Insert a tube 80 cm long into the stand into the T-shaped connector, attach one of the arms of the hanger to it, then attach a tube 20 cm long, another arm of the hanger, again the same tube and arm, a tube 10 cm long and, as a final touch, put the cap on top .

To make the structure hold better, it can be fastened special glue for PVC. Be careful with the arms of the hanger to make sure they are glued in the right direction - with the corners facing up.

Step 4: Painting

The design of the hanger is ready, but it still doesn’t look very aesthetically pleasing. Apply the spray paint of your chosen color carefully and evenly, without staining the room.

TIP: to make the hanger more stable, you can pour sand into the pipes from which the stand is made. After such a little trick, the hanger will not fall and turn over.

Pipe hanger with several levels

Another hanger of this type, only with expanded functionality: here you can not only hang clothes, but also put shoes. Compact and convenient wardrobe.

Necessary materials:

1. PVC pipes with a diameter of 20-25 mm:
   • 4 length 100 cm
   • 2 length 65 cm
   • 4 length 48 cm
   • 6 20 cm long
   • 8 5 cm long
2. 10 T-connectors
3. 6 corner bends
4. Plate for bottom shelf

We fold it completely similarly to the two hangers described above.

Wooden floor hanger in 10 minutes

Necessary materials:

1. Wooden sticks (4 pieces) 180 cm long and 2 cm in diameter.
2. Rope: This will be used to tie wooden sticks together (you can also use leather cords, wire, or some other decorative material, the main thing is that it firmly and reliably fixes the structure).
3. Spray paint: we used golden color to paint the bottom of the hanger legs (you can also use a different shade or color).
4. Paint: we used four various colors paint, one on each hanger leg (but, of course, you can use the same color for all legs).
5. Painting tape: When using spray paint, this will help you avoid over-painting.

Step-by-step instruction:

Step 1: Paint the supports

• Paint the legs in your chosen colors and let the paint dry.
• Place masking tape where you want it to end. spray paint, and carefully apply paint to the legs. It is better to do this outside, or cover the floor with newspapers so as not to stain anything. Peel off the masking tape.

Step 2: Forming a hanger

Connect wooden supports together using a rope, and then gradually move them apart. The result should be something similar to the base of a wigwam, the legs should be spaced wide enough so that the hanger is stable and easy to use.

This hanger takes up a lot of space, so it is best to place it in a corner.

Interesting ideas and photos

Tree hangers

This can be a neatly polished tree trunk or branch, or a folded wooden structure. The main thing is that there is one support and branches from it - the handles of the hanger. An original and useful addition to the hallway.

Designer hangers

The number of elements and design may vary, but what all these floor hangers have in common is that they can be quickly folded and disassembled just as quickly (if you didn’t use glue). Sometimes more expensive and noble materials are used, such as copper, sometimes wood or PVC, in any case the result is beautiful and extraordinary.

According to the great director, theater begins with a hanger. But is it only theater?

It is difficult to imagine any home - be it a cozy apartment or a spacious cottage - without this integral attribute of our life.

A coat rack on the floor, hooks on the wall in the hallway, hangers in the closet... They have one role: to keep our things in neat condition.

However, people with rich in imagination are able to turn this boring piece of furniture almost into a work of art. A simple set of tools for work, patience and a couple non-standard ideas– and you are the owner of a unique thing.

Hanger as part of the interior

The main thing in any home is a spacious closet. It combines blouses and dresses, trousers and skirts, gloves and scarves, coats and raincoats.

A good housewife has every thing in its place. The clothes in the closet are different. And the hangers for it should also be different.

How to make a hanger with your own hands? Believe me, it's easy and even fun. Rifle through the chest of long-forgotten grandma's dresses. You will find amazing things there.

Antique hangers (the so-called hangers) can be restored, and they will turn into the main decoration of your closet.

In the old days, coat hangers were made of wood. Using one of the decorative techniques, you can give an old thing new life. And what a life... You will want to hang such beauty on the wall, and not in the closet - and let everyone admire it.

You can transform a clothes hanger using decoupage, unusual coloring or appliqué.

The soft hangers are very easy to use. Things on them keep their shape and do not slip off. You need to wrap regular trempels with thin foam rubber, and then cover them with a nice fabric. Beads and ribbons will give the new thing a special charm.

How to decorate your home with a wooden hanger self-made more difficult. Woodworking requires special skill. And special tools are needed here.

Wooden wall hanger

Wall hanger is a simple design. However, its manufacture should be approached with the utmost seriousness - then it will serve you for a long time.

The main key to success is strong, dry wood without cracks. A piece of timber or a board is perfect. The length of the workpiece depends on the length of the future hanger. Before starting work, it would be a good idea to treat the wood with an antiseptic.

Panel fastenings are arranged on the board in one, two or three rows as desired.

Such a hanger belongs behind the door in the bedroom, as well as in the bathroom, pantry or bathhouse.

Accuracy is cultivated from childhood. Equip your children's room with a simple hanger. And if it is decorated with images of favorite cartoon characters, the child will be happy to take care of his clothes.

Note!

Do not attach the hanger directly to a plaster wall. Otherwise, you risk “whitewashing” your clothes. And a jacket or raincoat that gets wet in the rain will leave unsightly stains on the surface of the wall. To avoid this, you need to attach a sheet of plywood, thick paper or polyethylene under the hanger.

Panels for hooks can be given any shape - waves, ovals, hearts, suns, etc.

Attention! Using untreated wood is fraught with a lot of splinters. Don't forget to polish the hanger panel.

Use empty spools of thread or ready-made hooks of any shape as fastenings.
And if you turn on creativity, dried twigs or plant roots will be used. Trim them, remove the bark, sand them, varnish them - and here you have the hooks. You definitely won't find these in the store.

Simple wall hanger can be made from ordinary wooden planks. Nail them parallel to the wall - this is both a basis for fastenings, and protection of clothes from whitewashing, and interior decoration.

Note!

Of course, you can’t make such a hanger in half an hour. But the end result of your labors will be a real hanger. All that remains is to attach a shelf at the top for storing hats.

DIY hallway hanger

A good hallway hanger should be durable, beautiful, and at the same time as spacious as possible. IN limited space The hallway should accommodate outerwear, shoes and numerous accessories.

This should not be forgotten when designing a hanger. There should be enough compartments and shelves near the hanger in the hallway to accommodate everything you need.

Attention! When marking, consider the size of the wall on which you will place the hanger.

For standard apartment A hanger of this size is quite suitable: width - about 1 meter, height - slightly more than head level. Fastenings for clothes are placed on the panel in 2-3 rows.

Note!

A shelf for hats is needed at the top of the hanger. The strength of the structure will be given by the slats.

They are attached to the sides of the structure, connecting the shelf to the panel at an angle of 45 degrees. It is best to secure the hanger to the wall using dowels.

DIY wardrobe hanger

Making a hanger hanger with your own hands is very simple. There are many ways to make such hangers. You will need: large section wire, branch cuttings suitable shape, small plastic bottles, placed on a wire base, a metal bar or plate bent at the desired angle.

Wrap the base of the hanger with thin foam rubber or other similar material. Then choose a fabric that matches the color and sew around the base. Give the resulting cute little thing some charm with ribbons, beads or lace.

If the hanger is intended for a baby, decorate it with a funny face or applique. Pick a hook and hang it in the closet.

Floor hanger rack

You can solve the problem of placing clothes in spacious rooms with the help of floor hangers. Floor hangers are commonly used in reception areas of various institutions.

These interior items are made from metal pipes. A floor hanger is a universal thing. You can place almost anything on it. Except, of course, shoes.

The disadvantage of a pipe hanger is its instability. If things are placed unevenly on it, it may fall.

But the floor hanger can always be rearranged Right place or even hide it in a closet.

This type of hanger is rarely used in residential premises: it takes up a lot of space and poses a danger to children. Nevertheless floor hanger rack It’s quite possible to make it yourself. The materials usually used are:

• for support - artificial spruce cross, couplings plastic pipes, swivel mechanism broken swivel chair;
• for the stand - scraps of plastic or metal pipes, the trunk of a small tree, the handle of a shovel, a camera tripod, the “leg” of a floor lamp and other suitable parts.

Attention! The main thing in a floor hanger is its stability.

Unusual homemade hangers

A hanger can be made from absolutely any material or object. Sounds incredible? Don't believe me?

See for yourself:

• Scraps of steel wire, tubing, or angle iron are perfect for the job. Welding can be used to connect parts. And if the metal is flexible and soft enough, just bend it with your hands. The choice of form is yours.
• The design made of plastic pipes will appeal to fans of high-tech style.
• If you like working with wood, this idea is definitely for you. From leftover wood of any thickness you can make a practical and multifunctional hanger for the hallway.
• The simplest hanger can be twisted from wire. Attach clips to the edges of the resulting hanger - now you have a convenient thing for placing skirts and trousers. Experiment with the shape of the hanger - this can become the highlight of your product.
• The idea of ​​a “hunting” life is the good old antlers of a deer or elk. Attaches to a suitable base and can be used as a wall or floor hanger.
• It's no secret that many of us (especially men) prefer an ordinary chair to a spacious closet.

Shirts, jackets and even trousers are often hung on the back of a chair. Why not turn the back of the chair into an original hanger for those same shirts and jackets? This design can easily fit the entire suit.

Perfect for storing belts, sashes, and ties. homemade hangers in the form of rings.

Hanger as home decoration

Before you start making or decorating hangers, think about what style prevails in the interior of your room or hallway. After all new thing should fit perfectly into the existing interior. Here are some examples:

• Soft trempels covered with linen or knitted fabric in bright colors will fit perfectly into the decor of a country-style bedroom.
• Bright hangers with a “doll” design are suitable for a teenage girl’s room in the Barbie style.
• A luxurious hanger with twisted elements will decorate a boudoir in an oriental or palace style.
• A wooden hanger with carved patterns will emphasize strict style office or hallway in a classic style.
• Antique, artificially aged or skillfully restored hangers will add a special charm to a retro-style room.
• A hanger decorated with rhinestones, beads, bows and other shiny little things will look harmonious in the bedroom of a glamorous lady.
• Structures made of metal or plastic parts, simple and unpretentious in shape will decorate a room in a techno or hi-tech style.
• Simple in shape and laconic in design, hangers will complement a minimalist interior.

DIY photo hangers

A huge number of offers of floor clothes hangers makes you think: what if you do it yourself? At home, a hanger for a suit, hangers for outerwear and children's clothing, which are covered with a dust cover, are relevant and practical furniture. Such furniture fits perfectly into the interior; it can be easily moved around the room and apartment.

Clothes on such a hanger wrinkle less than in a closet. It is sometimes called a dressing room, because it allows you to partially unload the furniture closet, and suits will be in sight. It is also convenient to place children's things on this design. A cover for the hanger is necessary as protection from dust.

The main difficulty in making it yourself is processing surfaces and maintaining dimensions. Part matings should be maximum, which is not always possible to achieve manually. Therefore, when making a floor clothes hanger, you should use a combined method: some of the parts and operations will have to be ordered from professionals.

Model selection

Most convenient model According to surveys and the number of sales, the floor hanger for a suit with a cover is a hanger of the following design:

The dimensions can be changed at your discretion. It is advisable to attach a hook for children's hangers on the upper radius board on the back side. This will expand the range of possibilities for using the hanger. The thickness should not be greatly reduced, since parts may bend under load. Increasing the size within reasonable limits will make the hanger more stable.

You can choose any material: beech, ash, cedar, birch or pine. The latter is the most accessible. It is easier to process and finish. When choosing a material, the moisture content in it is especially important, since when drying, raw wood parts change their geometric shape. Simply put, the part may become bent or curled up like a propeller. Once the model has been selected, you should begin preparing materials.

Material selection and preparation

For making at home, it is best to choose pine blanks. They are the most commercially available and easy to process. Suitable for children's wardrobe hangers. They are not electrified when covered with a synthetic cover. Their advantages in comparison with other types of wood:

Manufacturing of parts

This is the main operation on which quality depends finished product. As can be seen from the drawing, you should prepare or buy wooden blocks and pine boards. They should not have knots larger than 5 mm. The wood must be dry. Curvature of bars and boards is not allowed. When purchasing, be sure to take into account those changes that were made taking into account the specifics and location. Some tips:

• The bars should have a small margin for processing. When purchasing, it is better to take two blanks for one part, taking into account possible marriage at work;
• Correct geometric shape. This is checked visually. The curves of the product are immediately visible;
• The length is taken with a margin of at least 3 cm. It will not be possible to carefully saw off 5 mm at home with a jigsaw;
• You will have to look for round crossbars with a diameter of 18 mm. If this size is not available, then these parts will have to be ordered;
• It is advisable to treat finished parts with antiseptic agents before varnishing;
• the cover can be made of fabric or other material.

Required for production minimum set hand and power tools:

Required materials for making a dressing room or children's clothing rack:

• high-quality pine beams;
• self-tapping screws for wood;
• wood drills;
• pine wood varnish and stain;
• hand carpentry tools;
• case.

Modern power tools are equipped with nozzles for suction of sawdust and dust from working area using a vacuum cleaner. At home, this option is very useful.

A set of blanks is now available. Prepare them in accordance with the dimensions according to the drawing. Compare symmetrical parts. They should be the same. Cut to size flat surfaces sand with a grinder. Curvilinear process sandpaper. This is the most labor-intensive part of making a costume floor hanger. When sawing, you may find that the wood in the thickness of the solid is damp. In this case, it will be difficult to sand the surfaces. Such parts must be dried before finishing. room temperature. Depending on the level of humidity, the drying process may take several days.

Assembling a wardrobe floor suit hanger

This is the final stage of the process of making a floor hanger for clothes. All parts are made according to the drawing and the compliance of dimensions is checked, since they are all already marked on the manufactured parts. You should pay attention to the quality of the fasteners. That is, a choice of screws and self-tapping screws. General recommendations by choice of screws:

• The length should not exceed two thicknesses of the parts being fastened. Otherwise, the screw will pierce the surface of the second part and everything will be ruined. On pine pieces, there is no need to drill a hole in the second piece being fastened;
• Select the color of the screws in accordance with the color of the material coating;
• Self-tapping screws must have a purpose for woodworking. The use of metal screws will significantly reduce the strength of the connection.

An important procedure is marking for drilling holes for fasteners. It is absolutely necessary to use the hole location markings. You need to mark the drilling location in such a way that the drill does not go awry. In this case, the strength of the connection between the parts will be insufficient.

The diameter of the hole that needs to be drilled for the mounting screws should be half the diameter of the screws themselves. The absence of holes can lead to splitting of the wood during the process of tightening the screw and the work will be ruined.

Tips for tightening screws with a screwdriver:

• Do not screw the screw in completely. A screwdriver has a high torque and can turn a self-tapping screw in a material.
• The final tightening of the fasteners should be done manually with a screwdriver so as not to turn the screw in the hole, since in this case the connection will lose strength.

When the floor hanger is assembled, it is sometimes necessary to varnish the joints with self-tapping screws. The screw heads should be level with the surface. These places should be sanded and varnished along with the screw head.

Features of children's floor clothes hangers

Apart from size, children's floor hangers are no different from adults. Thickness of parts for children's version may be reduced. Accordingly, the weight will be less, which will enable the child to move his children's hanger himself. The dimensions of a children's floor hanger should be selected taking into account the size of the child's clothing. Designs for girls and boys may vary. It is advisable to provide in the design the ability to hang hangers with clothes on a hanger and then cover them with a cover. To do this, you can adapt two metal hooks on which hangers will hang. The hooks can be placed on the back of the structure or on the sides.

Other options for floor hangers for suits and clothes

Figured wardrobe suit floor clothes rack

This option looks original, but when made at home, some difficulties may arise with the manufacture of curved parts. It is difficult to maintain symmetry when working with a jigsaw. Both parts need to be cut out by aligning and fastening the two blanks. The total thickness should not exceed the cutting depth parameter of the jigsaw. Modern household models are designed for a cutting depth of up to 70 mm, and this is quite enough. But this model is not suitable for shirts and blouses. That is, the possibilities of use are limited.

Mobile wardrobe suit rack on wheels

Another interesting model on wheels. The top of the design is topped with regular hangers, which is very convenient for placing a jacket, shirts and blouses. And it is convenient to hang trousers on the crossbars. Wheels are a good design feature, since a loaded hanger is more convenient to roll than to carry. A film or fabric cover will conveniently cover the hanger.

This model is produced by IKEA in Russia as a suit and wardrobe floor hanger.

It’s not difficult to make one with your own hands. Special fasteners will be required. As can be seen in the figure, the vertical posts must be attached to the base with metal screws. During manufacturing, you will need to carefully and accurately drill holes for screws in vertical racks. This is the only difficulty. Everything else is very easy to manufacture and assemble. The disadvantage is the need to disassemble the structure during transportation. You will have to unscrew the long bolts from the vertical posts.

Collapsible suit hanger rack floor in a rustic style

This hanger is more suitable for a hallway or corridor. You can put shoes under it. This model is quite difficult to make with your own hands. It is required to make large diameter holes in the intersecting round posts. In general, drill holes in round parts household tool very difficult. It's better not to try. To get around this unpleasant technological nuance you can take non-round square posts. Using a special drill, making holes of the required diameter in square bars is quite possible. It is recommended to use a metal crossbar. The wooden one will sag.