Help on Tele2, tariffs, questions

Installing water meters that will record the water used, both for the whole house and for one apartment, allows you to save a large number of funds. The amount indicated on the receipt will depend on how you use cold and hot water and in what volumes. In addition, by installing such a water meter, you will not pay for water losses that occur due to wear and tear of pipes and systems, which water utility employees love to blame on ordinary people.

You can install such a counter yourself or with the help of a wizard. After the installation procedure is completed, the water meter must be sealed and registered. We will tell you how to register a water meter, install it and where to go in this article.

Self-installation of the meter

Before installing the meter on the pipe, you should prepare it. To do this, you need to attach a cleaning filter to it, which will protect the device from debris. You also need to install check valve. It will not allow the measuring device to rewind the readings. If you install it, the water inspector will not allow you to register it. In addition, you will need tow or FUM tape, which will ensure the tightness of the nuts.

Next begins the procedure for directly installing a meter that takes into account the amount of water consumed. This is easiest to do on pipes made of metal-plastic or polypropylene, which can be easily cut even with a kitchen knife. It will be possible to connect the pipeline using a compact soldering iron.

The procedure for installing the counter is as follows:

If you have metal pipes, then installing the meter yourself will be very difficult and you will not be able to do it without the help of specialists.

Choosing a company for installation

If you don’t want to bother with installing the meter or are afraid of getting confused in the order and doing something wrong, then you can invite a special technician to do it for you. When choosing a company to install water meters, you need to take this seriously. Good companies differ:

If the water utility inspection refuses to register such measuring device, then the company will be responsible for all shortcomings. Specialists will do everything necessary work correctly and in the shortest possible time, after which they will issue you documents with which you will subsequently apply to management company for its registration and sealing.

What do you need to register?

Before registering a meter with a management company or with the Unified Information and Settlement Center (UIRC), you will need to obtain documents from the company that installed it. The list of required papers will include the following:

If you installed the meter yourself, you will still have to contact the service company that installed them so that they can check whether the water meter was installed correctly and the order in which it was connected. If there are no problems, then it will be sealed and you will be given all the papers that are necessary to register the water meter.

Where to register the meter

Registration of meters for the amount of water consumed is carried out by the EIRC and the management company, which you will have to visit in person with the package necessary documents. You cannot register your meter online or by mail. However, you will be able to report its indicators in the future using a telephone or an online service.

After you submit the documents, the EIRC will check them and certify them with seals. Data from them will be entered into the information base.

When registering water meters, the following will be recorded:

• Water meter serial number;
• The year in which this device was manufactured;
• Meter installation date;
• The amount of water passing through it.

Once the registration of water meters is completed, it will be put into operation. Every month the user must report his indicators to the management company or to the EIRC, which in the future will issue the person a receipt for payment for the consumed water.

Availability of benefits

If the family or any of its members is entitled to payment benefits utilities, then information about this must be indicated in the contract that was concluded by the company providing the services. At the same time, in order for benefits to begin accruing, you will need to write a corresponding application and attach papers confirming your right to the benefit.

You can install a water meter:

• on one's own. After installation, be sure to contact the management company so that its employees seal the meters and issue a commissioning certificate. The management company has the right to refuse to register your meters if it considers that the technical requirements during their installation were violated;
• with the involvement of a specialized organization. You can choose it yourself or ask your management company for a recommendation. After installation, the organization must issue you a commissioning certificate and other documents for the meters. Please contact the management company with these documents to draw up a contract for meter payments.

You can view the contacts of your management company on the portal.

After the meters are put into operation, starting from the 1st day of the next month, you will be able to pay for water supply and sewerage according to the readings of the meters.

After a certain time, it will be necessary to check the water meters to make sure that they are working correctly.

2. How to install electricity meters?

The owner of an apartment or house independently decides whether to install water meters with his own hands, or whether to use the services of professionals. There is no legal prohibition on installing appliances yourself. Only preliminary verification of the device and its sealing after installation are mandatory. Otherwise, the device indicators will not be taken into account.

You can often find a list of situations in which installing water meters is beneficial or, on the contrary, economically infeasible. In particular, the following data is provided: when the same number of people live in an apartment as are registered, the savings in paying for water supply after installing meters will be about 20-30%.

Unfavorable situations include housing more people than registered, as well as an unsuccessful water supply scheme. When introducing separate flows into the kitchen and bathroom into the apartment, you will need to install four meters (two for hot water supply pipelines and two for cold pipes). If there is a separate supply of fluid to the toilet (this is also common in old-plan houses), five meters will be needed.

By and large, all these arguments are not so significant, since their installation is mandatory, which means it will have to be done in any case.

Counter selection

There are several options for water flow metering devices on the market. The rules for installing water meters in an apartment with your own hands do not include an exact indication of the type of devices, so the choice remains with the homeowner.

Regardless of the design and operating principle, be sure to take into account the following features of the devices:

• recommended location of the meter (there are models for vertical and horizontal pipelines, as well as universal products that can be installed in any position),
• the diameter of the connecting pipes, which must correspond to the diameter of the pipeline (the most common models are DN15),
• permissible ambient temperature (theoretically meters for hot water can be installed on cold pipelines, the main thing is that the water temperature does not exceed the permissible value, that is, models for hot water supply pipes must be selected with special care.

All water consumption meters can be divided into two categories: non-volatile and connected networks. The first include the simplest and most reliable mechanical products that have an impeller. As the flow passes, the blades rotate and the number of revolutions is counted.

Volatile meters can be the following types depending on the operating principle:

• vortex (the device counts vortices formed when the flow passes through a special element installed inside),
• electromagnetic to determine flow rate influence the flow with electromagnetic waves (models differ high sensitivity to the composition of water),
• ultrasonic ones use vibrations to determine flow.

If the counting mechanism is isolated from the water flow by a special partition, such models are called “dry”.

Products with non-insulated counting mechanisms are “wet”.

The procedure for installing water meters in an apartment is the same for all models.

The meter must be purchased in a store, not on the market, and when purchasing, not only pay attention to the presence of a passport, but also carefully check the number indicated in the document with the number on the meter itself. This check will allow you to ensure that you are purchasing a certified device that is fit for use.

Choosing an installation location

Before installing water meters in an apartment, you need to know that the following requirements are imposed on the installation site of the meters, which are common for both private houses and apartments:

• temperature above 5° C,
• availability of lighting (natural or using lighting fixtures),
• accessibility for inspection, maintenance and repair.

In any case, the meter should be installed as close as possible to the entry point, but for apartments the rules are somewhat more flexible. Usually the metering device is installed in the toilet, and if the communications are inconveniently located (under the floor), installation in the bathroom is allowed.

Installation of a water meter in a private house is required no further than 20 cm from the input. If a well is installed, its lid is equipped with locks and sealed after the meter is sealed. Opening is permitted only in exceptional cases - in case of fire or accident.

Preparing for installation

Experts who know how to install water meters in an apartment recommend, first of all, check the package contents of the purchased device and prepare necessary materials and tools. First of all, experts advise purchasing gaskets (rubber for cold pipelines, paronite for hot ones). You may also need plumbing tow and special sealing pastes. As an alternative, synthetic threads that already have silicone lubricant can be used.

Kit necessary tools depends largely on the type of pipes available. Please note that you will have to cut specific area, so you will need a hacksaw or an appropriate tool for plastic.

• If the pipes are metal, to install the assembled unit (meter with additional accessories), you need to cut the thread (stock up with the necessary tools).
• If communications are made of plastic (polypropylene), purchase connection fittings, scissors for cutting plastic pipes and a special soldering iron.

To tighten the connections, you can use adjustable or spanner wrenches of the appropriate diameter; it is just important not to be overzealous and not to “tighten” the threaded connections.

When checking the completeness of the meter, you can arrange all the elements into flat surface in the direction of water flow:

Important: When laying out the elements of the future meter block, pay attention to the arrows indicating the direction of the water. They should all point in the same direction.

Before installation begins, you will need to shut off the water supply. IN multi-storey building you will have to turn off the entire riser, which can only be done by utility workers.

Sequence of work

1. Installing a water meter yourself begins with the so-called dry assembly. When assembling the circuit “roughly”, count the turns and note on which of the turns the circuit element takes the required position. After this, all connections are disassembled and reassembled using winding, plumbing grease and gaskets. At this time, it is important to ensure the required position for each element.

When this “chain” is placed horizontally, they “look” up:

• faucet or valve handle,
• dial (numerical panel) of the counter.

Down turn:

• impeller,
• filter sump (in this position it is easy to clean).

2. The second stage is cutting out a section of the pipeline for installation of the system. The installation diagram of a water meter in an apartment requires exact matching of the parameters, so it is important to measure the length of the assembled sequence with a minimum error and mark the corresponding distance on the existing communications. Before cutting out a section of pipeline, place a basin or tray to drain the remaining liquid in the system.

3. Installing the assembled unit on a metal pipeline will require cutting threads at the cut points. Easier to work with plastic pipes– in this case it is enough to use special fittings.

Conducting self-installation water metering devices, it will also be important to know where to go for this and what the cost of the procedure is.

Read about kitchen siphons, their types and installation.

You will find a review of water filters at this address. And reviews from owners can help when choosing.

Checking the quality of installation

To check the quality of the meter installation, it is necessary to connect the general water supply, then smoothly turn the tap handle or valve and carefully inspect the assembled unit for leaks.

If everything works flawlessly, you can call a representative of the utility service or water utility to inspect, check and seal the meter. Only after he makes the appropriate marks in the device’s passport and issues a document confirming the fact that the meter was put into operation will you be able to pay for water supply in accordance with the readings received.

In the whole process, the difficulty, in fact, is not how exactly to install water meters in the apartment, but the process of obtaining permits and registration documents, agreeing to turn off the water supply and other organizational hassles. However, by independently installing water meters in an apartment, the cost of savings can be approximately 1500-2500 rubles for the installation of each measuring device.

Reading time: 9 minutes

Reforms in the housing and communal services sector are evidenced by the widespread use of metering devices - meters for gas, electricity, water. Since the choice of device remains with the service consumer, it is worth figuring out how to choose optimal model and how to install a water meter in an apartment.

Purpose of installing the meter

Almost a quarter of the monthly utility costs are for hot and cold water supply. If there is no water meter in the apartment, payment is made according to the average water consumption per person per day: 190 liters of cold and 130 liters of hot water.

This norm significantly exceeds the volume used by consumers, so apartment owners are interested in whether it is profitable to install a water meter. Calculation of standard consumption is made according to the number of people registered in the apartment, and their age and whether they actually live at this address are not taken into account at all.

As a rule, 2 metering devices are installed in the apartment: for hot and cold water. It is easy to roughly calculate the costs of cold water and sanitation in a metropolitan family of 3 people without a meter and with its installation:

When calculating according to standards, the volume of water used is divided by the number of registered residents, regardless of the number of people living in the house. There may be many more residents, so someone has to pay other people's expenses out of their own pocket. That is why, by installing a meter, the owner or tenant of the apartment will pay only for the water actually used.

Legal regulation of meter installation

Legislation regulating the installation of water meters was developed in accordance with Federal program conservation of energy reserves. Based on established standards, each resident can control water consumption, save resources and reduce utility bills.

Legislative acts also stipulate whether it is mandatory to install water meters in apartments in 2019.

The installation of hot and cold water supply meters is regulated by the following regulatory documents:

• Decree of the Government of the Russian Federation of May 6, 2011 No. 354 On the provision of utility services to owners and users of premises in apartment buildings and residential buildings
• Decree of the Government of the Russian Federation of November 14, 2014 No. 1190 On the Rules for determining the amount of payment for utilities paid by tenants of residential premises in dormitories included in the housing stock of organizations carrying out educational activities, under rental agreements for residential premises in a dormitory;

• Law of November 23, 2009 No. 261 “On energy saving and increasing energy efficiency and on introducing amendments to certain legislative acts of the Russian Federation”;
• Decree of the Government of the Russian Federation of May 23, 2006 No. 306 “On the establishment and determination of standards for the consumption of utility services and standards for the consumption of utility resources for the purpose of maintaining common property in an apartment building”;
• Law of the Russian Federation dated December 7, 2011 No. 416 “On water supply and sanitation.”

Having familiarized yourself with these laws, you can understand whether it is necessary to install a meter in a communal apartment.

A water meter is a device that allows you to reduce payments. If the neighbors manage to agree, they can choose one of two payment methods:

• by the number of registered;
• by the number of people living in the rooms.

If you have a water meter, residents will not have to pay for utilities:

• during the absence of water supply;
• when carrying out preventive and repair work;
• in case of emergencies.

How to choose a water meter

When choosing residential water meters, you should take into account the operational characteristics of the devices and the features of their installation. All counters are divided according to the principle of operation into several groups:

• tachometer - equipped with an impeller that rotates under the influence of water;
• vortex – record the frequency of vortices of the water flow;
• electromagnetic - record the speed of liquid passing through the meter, inducing a magnetic field;
• volumetric devices - count even the weakest flow of water;
• ultrasonic – analyze the acoustic effect.

Tachometer meters and electromagnetic devices are considered optimal for residential premises. Tachometer meters and electromagnetic devices are considered optimal for residential premises.

Meter installation procedure

Having calculated the savings on utility bills when installing an individual water meter and having decided to purchase a meter, the consumer needs to contact the local Vodokanal branch. There they will tell him how technical requirements The device must match, and they will explain how to correctly install the water meter.

It is advisable to purchase equipment from a specialized store. Since water meters for cold and hot water have different designs and components, they are accompanied by technical documentation indicating the serial number of the model and a mark of initial verification.

IN regulations there is no direct indication of the need for preparation project documentation installation of a water meter. The legislation does not mention at all whether a project is needed for installation or whether it can be installed independently. And yet everything must be observed technical specifications requirements imposed by the regulatory organization, and buy a device that meets the characteristics and metrological requirements established by law.

The undoubted advantage for a water meter is:

• accuracy of measurements;
• quick dismantling for verification;
• long service life.

Many consumers do not know where to start or what the installation procedure is. Unlike other metering equipment, water meters can be installed either with the help of specialists or independently.

By Decree of the Government of the Russian Federation dated May 6, 2011 No. 354, only metering devices are allowed for use established type and have passed verification.

Before installation, the water meter must be submitted to the Vodokanal instrumentation service. The employee will put the institution’s stamp in the water meter’s passport, fill in the required fields and put a mark on the meter, which must remain intact throughout the entire verification period.

The legislation of the Russian Federation does not contain the time frame within which a device that has passed verification must be installed, therefore, before carrying out installation work You should take your time to think about where exactly it is best to mount the device.

Typically, the place for the meter is allocated closer to the entry of the pipeline into the room. In practice in apartment buildings Most often, individual water meters are installed in bathrooms, less often in bathrooms. However, the main condition is to comply with all installation requirements.

In order for the utility company to switch to making calculations using a new meter, and not according to established standards, the consumer must immediately contact Vodokanal immediately after installation to put the equipment into operation.

The employee will seal the device and draw up a report. It is this document that is considered the basis for switching to paying for water according to meter readings.

Homeowners are often interested in who should install individual water meters in privatized apartment. According to paragraph 3 of Art. 15 of the Law of the Russian Federation “On Energy Saving and Increasing Energy Efficiency”, installation of metering devices is carried out at the expense of the owners of residential premises.

Since the owners of privatized apartments are citizens, they are responsible for purchasing and installing equipment.

Manufacturers of water meters promise that the costs of purchase and installation will pay off after just a few months, and the right approach and saving resources, this period will be halved.

Device installation rules

Vodokanal representatives will seal the device and allow its operation if the consumer takes into account the basic rules for installing water meters in the apartment:

1. Examines the condition of the pipeline and replaces elements that have become unusable.
2. Select the installation location and check the completeness of the device: union nuts, coarse filter, check valve and counter.
3. At self-installation will prepare the following set of tools: wrenches, an iron for forming joints and scissors for cutting plastic pipes.

This is the most simple circuit connecting a water meter in a residential building or apartment. Upon completion of installation work, the system’s functionality is checked and a representative of Vodokanal is invited.

Preliminary activities

Even before purchasing a metering device, the apartment owner must prepare a package of documents for transmission to the resource supplying organization:

• application, copies of passport pages;
• document confirming ownership;
• site plan;
• the consent of all residents of communal housing, because water meters in communal apartments are not installed without the consent of the owners;
• technical passport of the meter;
• verification certificate;
• agreement for installation of the device and its maintenance.

Since the water meter is installed directly on the pipes, you need to check them before installation technical condition. Unstable pressure and air jams in systems central water supply will negatively affect the operation of the equipment and lead to rapid wear of its moving parts.

It is strictly not recommended to install metering devices on an old pipeline. Before connecting a water meter in an apartment, experts advise updating communications by replacing metal pipes with products made from modern materials, depending on the:

• water quality;
• pressure in the water supply system;
• type of connecting and shut-off valves used.

Self-installation of the meter

If the consumer is confident in his abilities, he can install the water meter himself. Before starting work, you should carefully study the technical documentation supplied with the device, and then proceed with installation. In this case, you should take into account:

If water meters have already been installed, but consumers want to transfer water meters in the apartment with their own hands, they need to use equipment with a diameter of up to 15 mm.

The water meter is mounted horizontally with the dial up, in a place accessible for taking readings. In addition, the device must not be subject to mechanical influence from other equipment.

How to choose a contractor to install a meter

It is not established by law who can install a water meter in an apartment, but since the contractor in this case is responsible for the correct performance of the work and the suitability of water meters for use, the organization must develop an installation scheme in accordance with the requirements of regulatory authorities.

There are many companies that offer water meter installation services. You need to choose who installs the meter from among the companies that have a license and are equipped with the necessary equipment.

The contractor must document the completion of all work and ensure that the consequences of incorrect installation are eliminated.

Water meter sealing and documentation

The use of unsealed water meters is prohibited by Law of the Russian Federation No. 102 of June 26, 2008 “On ensuring uniform measuring instruments,” therefore, immediately after installation, you must contact Vodokanal in writing with a request to seal the meter.

This procedure is necessary in order to prevent outside interference with the operation of the device. It is described in more detail in the presented video.

The specialist checks the correct installation, absence of damage and documentation for the water meter, and then issues a commissioning certificate.

In accordance with Art. 20 of the Law of the Russian Federation No. 416 of December 7, 2011 “On water supply and sanitation”, during the initial installation of equipment and repair work sealing is performed free of charge.

Water meter registration

After installation and sealing, the meter must be registered. To do this, the consumer submits documents to the management company or the Unified Information and Registration Center within 14 days in order to common base The following information about the equipment was entered:

• initial meter data;
• serial numbers and year of production;
• water meter installation date.

Only after registration and receipt of the appropriate act, the use of the meter is considered legal.

Who pays for the installation of meters

Low-income citizens are interested in how to install water meters in their apartments for free. The answer to this question is contained in a number of regulations: housing is provided with metering devices at the expense of the owners.

In apartments owned municipalities and provided under the contract social hiring, installation of water meters is carried out free of charge based on the obligations of the parties specified in the contract. The standard version of this document does not oblige the employer to pay for the installation of metering devices, so installation is paid for from municipal funds.

In a communal apartment, each owner and tenant has their own personal account, everyone runs separate households and pays for utilities separately. Therefore, there are no problems with installing a water meter in a communal apartment. It is enough just to obtain the consent of all property owners/tenants and contact the resource supply organization.

The legislation also identifies categories of persons who enjoy benefits when installing water meters:

• WWII participants, home front workers and rehabilitated people;
• the poor;
• disabled people of groups 1 and 2;
• widows of WWII participants.

Installation cost

The price of installing water meters includes the cost of purchasing a water meter and its installation. Device costs depend on:

• modifications,
• configurations,
• technical characteristics,
• manufacturer.

Equipment installation can also be done in different ways: on your own or with the involvement of organizations. The cost of the contractor’s services depends, in particular, on which pipes the device is mounted on.

To calculate the total amount of expenses you need to know all of the above aspects.

Possible meter malfunctions

A malfunction of the water meter is indicated by the lack of response to water consumption or the constant movement of numbers on the display while no one opens the tap.

There are several common reasons why the meter breaks:

• low water pressure or clogged pipes;
• improper installation or depressurization of the device;
• water temperature for which the device is not designed.

In all cases, the water meter readings are incorrect. It is impossible to make calculations based on them.

As practice shows, most often the consumer is interested in what to do if the hot water meter does not change readings. This happens due to exceeding the permissible temperature standards when hot water is supplied.

This type of malfunction can be prevented by periodically checking the maximum temperature threshold. It should not exceed 90°C.

How to properly take and transmit readings

There are 8 numbers on the water meter display. Red indicators indicate liters, black indicators indicate cubes. To calculate water consumption, it is the cubes that are taken into account, so when taking monthly readings, you need to take into account only the black numerical values.

The frequency of reading water meter readings is once a month. Usually, exact date specified in the utility contract.

The data obtained is multiplied by the water payment tariff. The amount received is indicated on the receipt.

You can submit readings to Vodokanal in various ways:

• by phone;
• via SMS;
• through a mobile application;
• on the city services website.

How often should verification be performed?

It is the responsibility of the consumer to monitor the correct operation of the water meter and submit it for verification to deadlines. During testing, the functionality of the device and its accuracy are confirmed.

The verification interval established by law is 6 years for a cold water meter and 4 years for a hot one.

In order not to miss deadlines and prepare documents correctly, read the material

Conclusion

Experts have plenty of tips on how to save money on your utility bills. The most effective of them is to purchase a water meter to measure hot and cold water. To independently regulate water consumption and pay only for the cubic meters used, you need to install meters in your own or municipal apartment, even if not privatized. Manufacturers offer a wide range of equipment, so choose reliable device It’s not difficult, and it will pay for itself quite quickly.

What to do if the water meter breaks down: Video

Lawyer. Member of the Bar Association of St. Petersburg. More than 10 years of experience. Graduated from St. Petersburg State University. I specialize in civil, family, housing, and land law.

Recently, every residential property owner must install a water meter.

According to officials, this is primarily beneficial for the residents themselves, since they can control its consumption based on the capabilities of their budget. The law of the Russian Federation provides for the possibility free installation counter for certain categories of citizens.

Who has the right to free receipt this service? What is the procedure for providing it? What happens if you don't install the device? Who is exempt from the need to use?

Legislative framework of the issue

The issue of installing a water meter is regulated by:

• Decree of the Government of the Russian Federation No. 776, which provides for the procedure and rules for the use of water, including Wastewater;
• Federal Law No. 261 on the procedure and rules for installing a cold and hot water consumption meter;
• Government Decree No. 306 on the formation of tariffs for citizens who, for some reason, have not installed a meter.

The list is not exhaustive, since at the regional level the local administration can adopt its own amendments to laws that expand the list of categories of citizens entitled to free installation of water meters, and also modify the very procedure for registering a meter.

Who can use this service from the state

On the territory of the Russian Federation to claim free installation of water meters certain categories of citizens have the right, namely:

In some regions of the country, local laws provide for the possibility of free installation of a water meter for pensioners who retired due to old age.

For example, in the capital, all citizens who have received meters can install meters for free.

In addition, in each region, the local administration can carry out some kind of promotion when, during a certain period of the year, water meters are provided free of charge to all citizens. A similar event was already held last year in St. Petersburg.

When not to use this device

Water meter may not be installed if the building:

In a situation where a residential building belongs to any of the above categories, it is necessary to mandatory contact management organization to receive a document that can confirm this fact.

If this cannot be done for some independent reason, you must contact Rospotrebnadzor with a corresponding application. Based on the submitted application, a specialist will be called who will be able to issue an appropriate conclusion.

Registration procedure

Initially, it is worth remembering that the Decree of the Government of the Russian Federation No. 776 of September 2013 “On approval of the procedure and rules for the private use of water, including waste water” clearly states: the introduction of meters into operation for citizens of the Russian Federation must carried out free of charge. In addition, the device itself is sealed free of charge.

Myself design algorithm is as follows:

If the management company is not personally involved in the installation of water meters, it must provide a list of organizations that are ready to provide such a service.

Price

If the property is municipal property, installation is free.

When installed in a privatized apartment, you will need to pay for installation of the device on average from 4 to 7 thousand rubles(depending on the region of residence and the level of complexity of the work).

Many management organizations already have in stock necessary equipment, but you can also purchase them in person. In any case, you need to be prepared to pay about 2.5 thousand ( average price per device). The price may increase depending on the meter model and manufacturer.

What to do after installation

After the meter has been successfully installed in the apartment, it will be necessary to call an employee of the management company to draw up the appropriate commissioning certificate.

After receiving it in your hands, you will need to conclude payment agreement for consumed water according to meter readings at established tariffs.

Package of documents

To install a water meter needs to be prepared:

To conclude an agreement You must have a certain list of documents with you:

• agreement for the installation of a water meter;
• passport for the device issued by the manufacturer (included in the kit);
• commissioning certificate;
• certificate of conformity.

If necessary, the list can be expanded.

Verification rules

Initially, the verification period is set by the manufacturer.

In such a situation no one has legal law cancel it if, according to the specifications, the meter wears out and after passing a certain volume of water through it begins to give false readings - it must be checked immediately.

In general, the verification period is regulated Decree of the Government of the Russian Federation No. 354 of 2011.

However, the provided rules only provide an unsubscribe to the agreement on the provision of public services, which indicates:

• information about the type of counter;
• when it was installed;
• manufacturer's sealing time;
• verification period.

In simple words, verification period based on existing technical conditions.

For today it is provided several varieties determining the verification period:

• time interval. Many meters have a standard time - 4 years must pass between calibrations for hot water and 6 years for cold water;
• or after a time when a certain volume of water passes through the device.

In practice, only the first method is used so far.

Writing an application

When compiling applications for filling meter and its further registration, it must be remembered that it must contain the following information:

Sanctions and fines for lack of water meters

Adopted back in 2009 the federal law No. 261 did not include any sanctions against those citizens who did not install water meters. This situation also developed with subsequent acts concerning the issue of transferring the equipping of utility systems with water consumption meters.

The legislation of the Russian Federation clearly states that citizens who have not installed water consumption meters before 2017 will not be subject to penalties.

However there is small nuance: starting from 2015, water tariffs for citizens who have not installed meters are calculated with an inflated coefficient.

According to the Resolution Government of the Russian Federation No. 306“On the approval of rules for calculating utility consumption standards” for 2019, the coefficient is set at 1.5.

It can be used for those categories of citizens in whose apartments it is possible to install a meter, but they have not yet done so.

In addition, the management company was allowed to install a water consumption meter without obtaining the consent of the residents. This possibility is permitted only by court decision.

It is worth noting that this provision is already being disputed by human rights organizations, since the mechanism for providing devices without the consent of residents remains completely unknown. Moreover, if we take into account high level corruption among officials, then the forced installation of meters can only significantly worsen the financial situation of ordinary citizens who want to save at least a little on utility bills.

Well, for now there are only two options: install a meter and control your water consumption, or pay inflated tariffs.

The need to use individual water meters is described in the following video: