Help on Tele2, tariffs, questions

Children's slide - great option for entertainment, especially in the country or local area. It is not difficult to make such a design, and independent work will cost much less than purchasing a ready-made slide in a store. Now we will tell you how to make a slide with your own hands, what you should pay attention to and what nuances to consider.

Material selection

The most common material options include plastic, metal and wood. We will not use the first two, since plastic is quite expensive (as a rule, these are ready-made slide designs), and metal will not be practical due to its high thermal conductivity. In summer it gets very hot, and in cold seasons it becomes icy almost instantly. So we will make our own slide from wood.

Care should be taken to ensure that the slide is positioned in such a way that there is approximately 2 meters around it. free space. This is necessary to ensure safety so that children do not get injured while playing. By selecting appropriate place, let's start designing the slide.

By and large, the project depends solely on the size free space on the local area, the availability of material and your desire. We give you examples of several popular designs, but you can easily plan your own. The main thing is to take careful measurements and mark everything on the diagram.

We draw attention to a number of important points:

• Focus on the height and age of the child;
• Consider the steepness of the slope;
• You may want to include a few bends in the slope.

The slide is made with your own hands from wooden beam 100*100 mm, 30*30 mm, 20*40 mm, as well as 25*100 mm boards, which will act as flooring and steps. We assume the length of the slide to be approximately 3 meters and the height of the structure to be approximately 1.5 meters. Having prepared the material in accordance with the dimensions indicated in your drawing, proceed to preparing the site.

We clear a square or rectangle on the site with sides according to the dimensions of the slide. This will be the place to install the supports. It is also advisable to clear the entire play area immediately as this can be difficult once the structure is erected.

We drill holes in the corners of the intended square or rectangle to a depth of approximately 60-70 cm. We compact the bottom of the holes and cover them with a small layer (5-10 cm) of a mixture of sand and crushed stone for greater strength and stability.

Now we lower the racks into the holes and be sure to fasten them with a planed board at a distance of about 10 cm from the ground. This will ensure the strength of the structure and it will not wobble. Use assistants who will hold the supports during fastening work. Also, do not forget to maintain a strict vertical using building level. In this way we install all the supports (in our case there are four, but you can use more) and fasten them together with boards around the perimeter. For greater strength, it is recommended to make a kind of lower platform from another set of boards, making sure to attach them to the main supports. This platform has no practical value, but with it, your own slide will be much stronger. However, on this site you can build something like a storage facility for toys, but that’s another story.

Installation of the upper floor

Secure the boards at the intended level, similar to the structure you made at the bottom of the slide. Now we take a 20*40 mm beam and install a platform based on these boards close to each other or with small gaps (10-15 mm). Be sure to provide for fastening the beam to the support posts. This can be done using metal corners. This area is covered with a 25*100 mm board, which is nailed very tightly and without gaps to the bars on top. The floor of the upper platform is ready.

You can, of course, immediately attach a plastic slope to the resulting structure, but we will not deviate from the project and will continue to use wood. So, we take two boards with a thickness of at least 30 mm and a length of about 3 meters (as provided for in the projects) and fasten them together with transverse boards 25 * 100 mm. Pay attention to the strength of the connection and maintaining right angles so that your slope does not turn out crooked. The pitch of the transverse board can be left approximately 20-30 mm. This way we will have the base of the slope, which can be covered with plywood or boards that should be polished.

At this stage, you will only secure the material for the slope, and then it will need to be processed. We'll talk about this later. Sometimes people who are interested in the question of how to make a children's slide choose a sheet of galvanized steel as a covering for the slope. This is, of course, a good, slippery option, but very susceptible to atmospheric influence, for example, temperature changes. We'll stop at wooden version, although you can use the material of your choice. Fundamentally, all installation work will not change.

Now we attach the slope to the base. You can simply grind off the edge of the board at the required angle, but for reliability it is recommended to cut special grooves, as shown in the figure. After installation, the parts are fastened with nails. Choose the angle of inclination at your discretion, which is for children younger age It is recommended to make a not too steep descent.

Important point: the lower edge of the ramp needs to be made in the form of a kind of “springboard” and raised above the ground at a level of about 20 cm. This is necessary so that the child does not hit the ground after descending, but, let’s say, “fly” some distance. A springboard can be made from additional boards by assembling simple design with a slight rounding inner side. Thus, the end of the entire descent should be either straight or directed slightly upward.

We cover the springboard with a coating and be sure to round off the front sides of the boards using grinder. We install the slope on a transverse beam, approximately 20 cm high, and fasten it with corners. It is advisable to strengthen the beam by burying two small posts in the ground, but if the structure is of sufficient weight, this is not a necessary procedure.

Ladder

To make the stairs, he uses the same parts as in the previous stage. First, determine the angle of inclination of the stairs, and then mark the angle of fastening of the steps. They must be strictly horizontal when the entire structure is ready. The steps are fastened with nails.

From additional boards we construct railings for the stairs and the upper landing itself. The racks for the stair railings must be made additionally, and the railings of the upper landing will be attached to the main racks of the slide.

The lower edges of the stairs must be protected with an additional cross board. It is advisable to make small racks, digging them into the ground to strengthen the structure.

Finishing work

Wood for a children's slide with your own hands must be carefully polished. Avoid chips or other damage. It is advisable to treat wood with a special varnish, and in several layers. This is especially true for the ramp - the most used element. To save varnish, the base of the slide can be painted acrylic paint, but for handrails and ramps, varnish is best suited.

Remember to let each coat of varnish dry thoroughly before applying the next. Ensure the uniformity of the coating and carefully process all parts, even the most inaccessible places.

Provide safety and convenience for children. We have already cleared the area, now we need to take care of the softness. You can cover the entire area with a special rubber tiles- it is soft enough to prevent injury. Even if you do not have the opportunity to use such a coating, pour piles of clean, sifted sand in front of the slope. To prevent sand from spreading around the site, you can make a kind of sandbox from the boards left over from construction.

Care

So, now you know how to build a slide for children with your own hands, but do not forget that it requires regular maintenance. Intensive use of the slide is from late spring to mid-autumn. Try to check the surface at least once every two weeks, excluding obvious damage, which children should definitely tell you about. If the surface is worn out (especially important for slopes), you should thoroughly clean it, check for chips and re-varnish it. You should not save money - repair the entire surface at once, and not parts of it, since in the future you will have to do double work.

When the slide is not in use, it is advisable to cover it with polyethylene and secure it with ropes. It is better to take opaque polyethylene to protect the slide from direct sunlight. Be sure to check the surface after winter - temperature changes may cause unevenness or structural parts to become loose.

Children's slide in the country or in the local area - great fun, but you can interest children not only in this, but also in the construction process itself. As you can see, building it with your own hands is not difficult and the children will be happy to help you with this. Just don't forget about safety and regular care behind the structure.

On your suburban area There’s a lot of space, but there’s not much for the kids to do? This is not the point. If not a playground, then at first DIY slide for a child must be built. And this is within the power of any dad who can hold an instrument in his hands in the slightest degree.

What kind of slide should a child have?

First of all, a do-it-yourself slide for a child should be safe. Take care of the stability of the structure. Several children can climb the slide at once, and the structure needs to support their weight without shaking.

No sharp corners, protruding fasteners, rough edges, or gaps that could cause injury - this should be taken very seriously. The surface of the descent should be especially smooth.

Be sure to provide curbs along the edges of the gutter, a parapet at the top, and a railing on the stairs.

Think about where the child will land after sliding down the slide - it is better if it is sand, a lawn, densely overgrown with grass; you can even put mats on the kids to make them feel comfortable and safe.

Which material is preferable to use? First of all, harmless to the child, high-quality wood is best. We will consider the option of a design made of wooden building materials, and the slope can be finished with plastic or metal coating.

Slide for a child - stages of construction

So, the task for dad or grandfather is clear - a do-it-yourself slide for a child. Where to begin? First of all, decide on the location for the structure and its design, select materials and tools.

The place where the slide will be located should be clearly visible so that you can always see how your children ride and play.

It’s good if during hot hours a shadow falls on the hill from nearby trees. The structure should not be located near outbuildings and a garage.

Installation of supports

In order for a homemade slide for a child to be reliable, it is important to install stable supports.

Level the downhill area and make markings in the form of a square or rectangle. By using garden borer make indentations (optimally from 40 to 60 centimeters). Before installing the support bars, lubricate their ends with mastic. Concrete the installation site.

Using a level, level the supports and fasten them at an average height of 1.3-1.5 meters using cross beams, which you will pull anchor bolts.

Making the escapement

Make a slope from the cross beams, the bottom of which must be driven into the ground and secured with metal brackets. The width of the slope is from 60 to 80 centimeters, and the angle of inclination is 55º.

Cover it with boards, build sides on the side, the height of which should be at least 30 centimeters. The finished frame of the ramp can be sanded and painted. And if you want a different coating, then sheets of plastic, galvanized steel, plywood, or linoleum will do.

The slope will be more slippery, and a slide made with your own hands will delight your child.

Construction of the stairs

In order for the staircase to be reliable, it is important to build the stringers correctly. A cross beam or 50mm edged board is suitable for this.

Secure the folded boards together using self-tapping screws. Using hand saw, make cuts for the steps according to the marks. Insert and secure the steps of the stairs, tighten the stringers with anchor bolts and locknuts.

The angle of inclination of the stairs depends on the age of the child. Older children are not afraid of steeper climbs. But in any case, railings on the stairs are required.

Mounting the upper platform

The top flooring is made of timber (the so-called stiffeners), which should be laid out parallel to each other and attached to the frame of the structure, and boards should be laid on top. You should leave a gap of 5 mm between them to allow water to drain when it rains.

Be sure to make a parapet on the top platform from slats and cover it with plywood. Adjust the height of the fence depending on the height of the child.

Each structural element must be securely fastened so that a do-it-yourself slide for a child is safe and durable.
In this video, the author will share his experience of building a children's slide with his own hands:

Mandatory elements of the attraction complex on summer cottage There is a sandbox, a swing and, of course, a slide, which even older children will enjoy riding on. Most of them can be made independently, saving on the expensive purchase of already finished structures. For example, constructing a children's slide with your own hands is quite simple, using available materials.

Advantages and disadvantages of different types of slides

In order to choose the material from which the children's slide will be made, you need to carefully read each of them, weighing all the pros and cons. The most popular are:

• tree;
• metal.

Even though they have a similar design, the manufacturing process is still different. The reason for this is the characteristics of the materials.

Each of these slides for children is built according to a standard layout, which includes:

• stairs;
• descent;
• base;
• upper platform;
• mandatory protective component.

Besides, classic design often supplemented with all sorts of internal labyrinths, sandboxes, additional descents - here everything depends only on your imagination.

Advantages:

1. Small financial expenses. Since wood is relatively inexpensive, and specialized tools are not needed to process it.
2. Ease of manufacture. Construction of a slide from wooden planks and bars will not require you to have special construction abilities and skills. Often it is enough to adhere to the scheme according to which the structure is made.
3. Minimum tools. To construct a slide you will not need a large number of various devices.
4. Environmental Safety. Wood, as a rule, not only does not cause allergies, but also does not emit toxic substances when heated.
5. Any place to install the slide. Unlike metal structure, a wooden attraction can be placed in any comfortable spot on the site, since in the burning sun the wood will not heat up and will not burn the little fidgets.

Flaws:

1. Susceptibility to rotting. Wood is a material that requires special processing protective equipment and varnish. If this is not done, then the slide begins to rot and dry out under the influence of external factors.
2. Descent deformation. This happens due to exposure to rain and sunlight.

When installing a wooden structure, special attention should be paid to the slope. To cover it, it is best to purchase factory-made material, for example, linoleum or plastic. The latter is more expensive, but more reliable and safer.

If desired, it is very easy to remake a wooden slide, for example, turn it into a pirate ship.

Metal constructions

Just a few years ago, such slides decorated almost every yard. With proper care, they can last a very long time.

There are practically no significant differences between a wooden and a metal slide, except that an iron structure will require pouring a foundation.

• This design consists of:
• small sites;
• descent;

Advantages:

1. ladders made of pipes. Structural strength. The advantage of a metal structure is that it does not require special care
2. , it can withstand temperature changes, rain and high humidity, as well as heavy loads.

Flaws:

• Reliability. It rarely happens that any part of such a design becomes loose or comes off. Difficult to install. To install a metal slide you will need welding machine
• and the ability to use it. Moreover, you will need knowledge of metal working technology.
• Heats up quickly in the sun. Iron is subject to rapid rise and fall in surface temperature depending on the time of year. If you install the slide in a place where the sun shines brightly, your child can easily get burned while playing. To avoid this, it is recommended to install the structure in a shaded place or hide it under a special canopy. It is possible to combine a metal base with a plastic slope.

Loss of interest in the child. It is almost impossible to decorate a metal slide with anything, which means that such an attraction can bore your child.

After familiarizing yourself with the advantages and disadvantages of each manufacturing material, you can confidently make a choice. It is not necessary to use only metal or wood; you have the right to combine them, resulting in an original, interesting and durable structure.

Photo gallery: different slide designs Hills can be part of a whole entertainment complex Slides can be expanded various elements Children will definitely like this bright wooden slide
A high-quality and reliable slide will bring a lot of fun to children and their parents For children of any age, fun on the slide will be happiness A reliable slide is the key to safe games Wood is the best option for non-professional welders

Metal slides are considered the most durable structures

Requirements for a children's slide

It is worth understanding that when installing a slide from any material, certain requirements must be observed:

Preparatory stage

The success of the work depends on careful preparation.

Choosing material for construction at the dacha Wood can be called the most optimal and reliable option from which you can build unusual and. It will be a godsend for people who are not directly involved in construction and repair.

When installing an iron slide, unprofessional welders and assemblers of metal structures can get injured or spoil the raw materials, since this is a fastidious material that, when heated, welding work may become deformed. In addition, to manufacture such products you will definitely need welding equipment.

Children's slides made of wood combine ease of use and high safety. Moreover, they are the easiest to manufacture and install.

Sizing and drawing

Work must begin with drawing up a design drawing. Be sure to decide whether there will be a slide with a house or it will be classic version. Draw a diagram of it indicating all dimensions. This will allow you to calculate the amount of material. Norm:

• for children from 2 to 5 years old, the slide should be made up to 1.5 m high;
• from 5 to 11 years it is recommended to install a structure with a height of 2.5 to 3.5 m;
• over 11 - above 3.5 m.

List of materials and tools

The construction of the structure should begin with the choice of wood. Preferably use conifers. In order to build a reliable, beautiful and comfortable wooden slide for children, you will need the following materials:

• 8 boards (recommended dimensions - 5x14x60 cm);
• 4 thick beams 0.6 m long;
• 1 beam 0.8 m long;
• several sheets of plywood (150x150x12 cm);
• 2 round wooden profiles (30x120 cm).

List of required tools:

• electric or mechanical wood saw;
• hammer;
• hand or electric drill;
• plane;
• tape measure and level;
• drill.

Step-by-step guide to creating a children's slide with a ladder with your own hands

All work takes place in several stages:

How to cover the base, walls, platform and slope of the slide for better sliding and decoration

At the end of all work, the slide in mandatory should be coated with varnish or color emulsion. It is also recommended to treat wood and plywood by special means, otherwise, under the influence of moisture, their service life will sharply decrease.

The slope can additionally be covered with linoleum, which will provide better glide.

You can decorate the slide with your children. They will definitely enjoy this process.

Photo gallery: external finishing of the structure

Coating with varnish and special emulsions ensures a long life for the slide Wooden slides provide exciting games A slide made of wood, which is coated with emulsions and by special means, will allow children to play safely In addition to varnish, slides can be coated with any emulsions, thereby giving them bright shade Multi-colored options will delight kids Upon completion of all work, you will have an excellent attraction for children that will meet all safety requirements

Video: how to make a slide for a child out of wood

The key to a successful and fun time is a high-quality and reliable slide. It is a way to keep your child busy with an exciting activity and develop his physical skills. And as the baby grows up, it will be possible to complete the design and improve it, which can encourage your fidget to a healthy lifestyle.

If you have children and a summer cottage, then you should definitely build a slide on it. While parents are gardening or cooking barbecue, the kids will have fun on the mini playground. Read about how to plan and make a slide with your own hands, using photo and video instructions in practice.

Height and safety

The slide on the site should first of all be safe for children of different ages. So, for children under 2 years old the height of the slide is only 1.5 meters, for children from 2 to 7 years old the height is about 2.5 m, and for teenagers 3-3.5 meters. The steps on the slide ladder should be wide, and the rungs should be located close to each other. Further, the staircase design must be equipped with handrails of any type: after climbing the slide, the child must hold on to something.

Advice! So that the slide serves more than one generation of children and is safe on the stairs and around it anti-slip coating. The covering protects children from injuries when climbing during rain, snow or after swimming in the pool.

Another important step in creating a safe slide is calculating the weight of the children who will ride on it:

1. The slide is secured to a base or supports that can easily support the weight of 2-3 children.
2. A level gutter is responsible for safety during descent; it is good to make sides on the sides to prevent the child from falling out.
3. All bolts, chips, chips or sharp corners on the children's slide are excluded. The wood is sanded so that the child does not drive a splinter.

Advice! Under the gutter along which the child descends, a soft piece is placed - this lawn grass, a mound of sand or soft covering.

Choosing a place to place a children's slide

The slide is placed in the place where it opens good review from any point on the site. But make sure that the place for games is not in the very hot sun. In the case of such an arrangement, it is worth thinking about building a canopy.

Advice! The canopy is made of polycarbonate, and a regular beach umbrella is also suitable for a low slide.

Wood slide

Slide from natural wood distinguished by its environmental friendliness and ease of installation, it consists of the following elements:

1. Base.
2. Staircase with railings.
3. Descent.
4. Top platform and protective parts.

Such a slide can be complemented by a whole game complex of labyrinths, parallel bars, a sandbox or mini-rooms with entrances and exits. The construction of a wooden slide involves the selection of high-quality raw materials and their normal processing.

The ramp is made of plywood, pre-coated with varnish to hide sanding errors. The supporting structure is made of timber, and the steps are made of strong boards.

Important! Today, there are a variety of ramps available for sale, made of durable plastic, fiberglass or wood. The minimum price of a stingray is 1.5-2 thousand rubles. The best option is the creation load-bearing structure for a slide with subsequent installation of a flat or spiral slope.

A wooden slide is good for everyone, but located in an open space, after 3-5 years it can dry out, be damaged by insects or mold. Wood rots from rain, and the situation can be saved by covering each structural element with a thick layer of varnish. But after winter and hot summer, the slide should be inspected, identifying dry or cracked parts.

Metal slide

Previously, metal slides stood in every yard, distinguished by their strength and durability. Such designs are more reliable, because they are not afraid of the hot sun, rain, or frost.

The construction of such a slide is carried out in several stages:

1. The most primitive foundation is poured; you can immediately pour 4 support pipes, as is done when installing fences.
2. Next, the stairs and railings are welded onto 2 pipes on one side, the remaining 2 pipes are used to attach the gutter.
3. A platform is welded onto all pipes.

Important! Gutter is 2 metal pipes, to which a curved sheet of metal is welded. After assembling the slide, everything welds must be sanded; a grinder is used for these purposes.

After completing the assembly of the structure, the slide can be painted with plain paint or painted. The metal gets very hot under the sun, so on hot days it is worth covering the slide with a beach umbrella to prevent children from burning their skin.

A simple slide can be made using a descent from a house, which is also built with your own hands, using timber or leftover building materials:

1. B 4 old car tires Concrete piles are mounted and on which beams of the required height are installed vertically. The beams are secured with construction corners.
2. A frame for the house is installed along the perimeter of the posts, with holes for entry through the stairs and exit through the slide.
3. After this, a light but durable ladder, a chute for descent, the floor and walls of the future house are installed. The elements are attached using self-tapping screws, and the entire wooden structure must be coated with an antiseptic.
4. Holes are drilled at the joints of the beams, tightening the structure with 120 mm bolts.
5. Next, stack rafter elements from timber for the roof. Final coating The roof is made of corrugated sheets. Decorative tiles made from ordinary colored foam are often used.

The last stage is to cover the entire structure with a layer of varnish.

How much does a finished slide cost?

To avoid the hassle of making it, you can simply purchase a slide:

• Inflatable slide for the little ones. Such a slide perfect solution for small children, because it can be equipped with a shallow pool, mini trampoline or educational elements. The cost of an inflatable slide starts from 4 thousand rubles, usually it has a height of more than 1.4 m. The advantages of the slide are its mobility, resistance to temperature changes, and after the child grows up, the inflatable center can be sold at a profit.

• Play complexes are made of plastic, in some cases combined with wood. This type of city is more expensive, and the minimum cost starts at 4.5 thousand rubles for the most primitive model. But plastic slides can combine swings that develop muscle corset bars, basketball basket and much more. Thanks to the fastening system, the height of the gutter can be adjusted to suit the age and height of the child.

Creating a children's slide is a creative process, and a full-fledged play area requires a swing, a sandbox and even a football goal. But to build these elements children's corner much cheaper on your own, because buying finished product requires 60% more material resources.

DIY children's slide: video

Slide for children at the dacha: photo

In the courtyard country house or at personal plot At the dacha, the best entertainment for children will be a playground with a slide. You can make a children's slide with your own hands. The main thing is to know what materials and tools you will need, and to draw up a competent project plan. After all, there are many combinations: with a steep and sloping descent, with carved decorations, additional play areas, etc. This kind of entertainment will appeal to children aged from two to eight years.

Types of children's slides

Construction and children's stores offer a wide range of ready-made outdoor and indoor slides for children. Small designs suitable for installation inside the house, if the height of the ceilings of the home allows it. But bulky slopes are more suitable for the street. Each model has its own design features, and differs in materials of manufacture:

The last option is best for self-made and installation on a summer cottage or in the courtyard of a private house, due to the availability of material, the possibility quick repair or replacing broken parts. In order to repair or install a wooden slide with your own hands, you do not need to call specialists, use welding, etc.

A set of necessary tools

To make a wooden slide for children in the country with your own hands, you will need a fairly large set professional tool. Some tools are sure to be found in every man’s garage or attic; something will have to be purchased or borrowed, for example, from a friend or neighbor. To make a children's slide from wood You will need the following tools:

Armed necessary tool, you can start designing a future entertainment area and purchasing materials for making a ramp.

Creating a Project

Nowadays you can find a lot of ready-made drawings, diagrams, and 3D projects on the Internet, so you don’t have to “reinvent the wheel” yourself. Volumetric models with detailed instructions installation and list necessary materials will help you create designs for children of all ages. They may differ in the material for the descent, the type of stairs, supporting structures, height, etc. When developing a project for a children's slide made of wood The following factors should be taken into account:

In addition, the dimensions of the structure are taken into account, which will help to correctly calculate the width of the ramp and the angle of inclination of the trigger element. When making a wooden slide at the dacha with your own hands, you should take into account the child’s opinion and his wishes.

Materials required for construction

Of course, the dimensions and quantity of materials that will be used to create supports, stiffeners, railings, upper railings, steps and other elements directly depend on the dimensions of the homemade wooden slide for children. These details are clarified when choosing a play area project. To understand what materials may be needed, as well as what the installation and construction process will be, we took as an example a project for a children's slide with a slope of 3 meters and an upper platform of 50*50 cm.

List of building materials:

Additional building elements for fastening - these are galvanized screws and anchors. If you need to improve the string of the stairs, then you should stock up on additional lumber.

Construction stages

The process of building a durable slide for children can be divided into several stages. This includes preparation (of materials and installation location), installation of playground supports, flooring, production of a ramp, stairs and safety structures. All these steps are important, poorly executed installation work, can reduce operational terms the entire structure, and also reduce the safety of use.

Preparing materials and space for the slide

First of all, you need to take care of the quality of the wood. It must be well dried, this will help to avoid deformation of the bars when using the slide.

This is followed by the stage of processing the lumber with an electric planer, which will allow you to quickly get rid of wood knots and nicks. After this, you will need to sand the wood and round the chamfers. The lower part of the beams is treated with a moisture-resistant material that prevents the wood from rotting, for example, resin or waterproofing mastic.

After this, you can begin to prepare a place for a children's wooden slide. Land plot will need to be well leveled, and then mark the areas where the supporting elements will be installed. The depth of the holes in the corners of the square should be at least half a meter. Bottom part the depressions are filled with crushed stone and sand.

Installation of supports and floor

The support beams are securely installed in the prepared location and then concreted. The structure can be strengthened using a “bundle”. To do this, small cuts-grooves of 2 cm are made in the racks, and a planed board is inserted into them, connecting the supporting elements to each other. Large screws or self-tapping screws are used as fastenings.

After the supports are installed, it is time to begin installing the floor of the top deck of the slide. Wooden blocks stiffeners are laid parallel to each other, then laying follows floor boards. It is worth taking care in advance to ensure that there is no accumulation of rainwater, for this purpose a small gap (5-7 millimeters) is left between the boards.

Making the escapement

If a factory-made plastic ramp is used when building a slide for children, then its installation will not take much time; you just need to screw it to finished design. When using lumber, the floorboards are fastened together, and wooden railings are mounted along them.

The floor of the upper platform is attached to the slope in several ways: by forming an acute angle ( optimal inclination equal to 45 o) or cutting out grooves. Important point, this is stripping the wood that forms the descent; it must be perfectly smooth. After sanding, the surface of the slope is coated with varnish or special paint.

To make a ramp, you can choose other materials, for example, slippery plastic sheet, galvanized steel, durable plywood, thick linoleum. Any of this material is applied to a wooden slide, which improves the sliding process as a child slides down the slide. To reduce the risk of injury to the children's slide, any irregularities and places where screws are attached are sanded and coated with special paints.

Installation of stairs and railings

The landing of a wooden slide built with your own hands must consist of at least several steps. The type of construction is selected individually; the ladder can be installed on a stringer or bowstring. How younger child, for which yard entertainment is being made, the smaller the march of steps should be. After this, you can begin attaching the fences, the size and height of which directly depends on the dimensions of the structure and the age of the children.

After installing a children's wooden slide, it is recommended to take care of the safety of the children who will ride on it. It is necessary to arrange the landing area by decorating this place with a sand mound or a soft sports mat. You need to take care in advance to clear the space of thorny bushes, stones, pipes, etc. Periodically checking the structure for dry boards, especially after winter, will help avoid unwanted childhood injuries. This slide goes well with other play elements made with my own hands, for example, benches and sandboxes.