Pppk signal 20p smd technical specifications. TD Aktiv-SB: video surveillance and security systems. Technical parameters of the device
The activities of our online video surveillance store cover the entire range of equipment for security and safety systems, which includes:
and much moreCarrying out deliveries throughout Russia, our company delivers goods even to the most remote regions of the country. We try to satisfy the most demanding client.
Aktiv-SB specialists understand the specifics of the operation of security and video surveillance systems not only in Moscow, but also in remote regions with difficult climatic conditions. Our employees will offer you the most suitable options both in terms of functionality and cost, tell you about their capabilities and justify the need to use certain technical systems.
Trading house security systems Aktiv-SB carries out service and warranty service sold equipment, acceptance and inspection of goods of inadequate quality, exchange of faulty equipment.
Our clients are commercial organizations and end consumers, installation companies and state enterprises. More than 50,000 registered users of the corporate website have access to a constantly updated database of technical documentation, certificates for modern systems security, and also participate in the affiliate program and special promotions conducted by the company.
For the convenience of our relationships with clients, we cooperate with installation organizations that are ready to install video surveillance systems of any complexity and will always come to your aid. Therefore, if necessary, you can not only purchase equipment from us, but also, for example, order the installation of video surveillance systems or carry out maintenance other security systems.
The work of our security systems hypermarket is based on the principles of honesty, openness and decency. We look into the future with confidence and strive to develop and improve every day.
Signal-20P SMD control of 20 loops, the ability to program the parameters of each loop to operate in security or fire alarm, recording of activations in each alarm zone of one and two fire detectors, fire extinguishing control outputs, control from built-in switches or via the RS-485 interface from the “S2000” remote control or PC.
Buying Signal-20P SMD in the specialized Jet-Video Company, you can order fast free shipping high quality licensed equipment affordable prices.
Main Features Signal-20P SMD:
- 20 alarm loops with all types of security and fire detectors
- Two power inputs: for connecting the main and backup power sources, voltage from 12 V to 24 V. A failure of the power supply line of one of the sources (short circuit or break) does not affect the operation of the other
- Monitoring of the “relay 4” and “relay 5” output circuits, intended for connecting external sirens, for open circuits and short circuits
- Programming AL types:
fire smoke two-threshold (with recognition of the activation of one or two detectors in the alarm system)
fire combined single-threshold (with the ability to connect thermal and smoke detectors)
firefighter thermal two-threshold
security
security with detection of violation of the detector blocking contact
security entrance
alarming
technological
programmable technological - Possibility of measuring the resistance of a loop and transmitting its value to the “S2000” remote control or “Orion” workstation
- Operation in case of disruption of the RS-485 interface and after its restoration, transmission of accumulated messages with the time of their occurrence to the “S2000” console or “Orion” workstation
- Connecting the "Dallas Touch Memory" key reader allows for centralized management (arming, disarming) of partitions and identification of a business entity
- Programmable logic control of five relays (37 local control tactics)
You can be sure of quality Signal-20P SMD. All equipment that Jet-Video Company has in stock is covered by the manufacturer's warranty. We are glad that you contacted us to buy Signal-20P SMD and we will try to make the selling process as pleasant as possible!
Specifications Signal-20P SMD:
- Number of alarm loops - 20
- Number of control programs for each output - 37
- Internal buffer capacity - 64 events
- Supply voltage - from 10.2 to 28 V
- Current consumption by the device, in standby mode: with a 24 V power supply: from 200 mA to 400 mA, with a 12 V power supply: from 300 mA to 600 mA
- Loop load current - 3 mA
- Control of 5 relay outputs
three relay outputs of the "dry contact" type for switching: with a maximum voltage of up to 28 V and a current of up to 2 A or up to 80 V and a current of 0.1 mA to 50 mA (outputs "relay 1", "relay 2", "relay 3"); two outputs with monitoring of the health of the siren connection circuits: with a maximum voltage of up to 28 V and a current of up to 0.5 A (outputs “relay 4”, “relay 5”); - Operating temperature range - from minus 30 to +50 °C
- Dimensions: 230 x 135 x 43 mm
Description: Reception and control device (addressable loop expander) security and fire alarm Signal-20P SMD, 20 loops, plastic case.
Article: Signal-20P
Scope of application:
Main features:
- Programming AL types:
- security
- security entrance
- alarming
- technological
Specifications:
| Parameter | Meaning |
| Signal-20P SMD |
|
| Number of alarm loops | 20 |
| Number of control programs for each output | 37 |
| Internal buffer capacity | 64 events |
| Supply voltage | 10.2 to 28 V |
| Current consumption by the device, in standby mode: | |
| - when powered by 24 V: | 200 mA to 400 mA |
| - when powered by 12 V: | 300 mA to 600 mA |
| Loop load current | 3 mA |
| Control of 5 outputs (output control logic is programmable): | |
| -three relay outputs of the "dry contact" type for switching: | with a maximum voltage of up to 28 V and a current of up to 2 A or up to 80 V and a current of 0.1 mA to 50 mA (outputs "relay 1", "relay 2", "relay 3") |
| -two outputs with monitoring of the health of the siren connection circuits: | with a maximum voltage of up to 28 V and a current of up to 0.5 A (outputs "relay 4", "relay 5") |
| Operating temperature range | -30 to +55°С |
| Dimensions | 230 x 135 x 43 mm |
The Signal-20P device is available in two types of cases: metal and plastic. Programming and control is carried out using the S2000 remote control or from a computer using specialized software. Signal-20P can be used both in standalone mode and as part of the Orion automated workstation. The device can be powered from voltage sources rated 12V or 24V. The main and backup power sources can be used, and a fault in the power supply line of one of the sources (short circuit or break) does not affect the operation of the other. Signal-20P has programmable control logic for five relays, which allows you to have 37 control programs for each output.
Scope of application:
- Autonomous operation and operation as part of the Orion ISO
Main features:
- 20 alarm loops with all types of security and fire detectors
- Two power inputs: for connecting the main and backup power sources, voltage from 12 V to 24 V. A failure of the power supply line of one of the sources (short circuit or break) does not affect the operation of the other
- Monitoring of the “relay 4” and “relay 5” output circuits, intended for connecting external sirens, for open circuits and short circuits
- Programming AL types:
- fire smoke two-threshold (with recognition of the activation of one or two detectors in the AL)
- fire combined single-threshold (with the ability to connect heat and smoke detectors)
- firefighter thermal two-threshold
- security
- security with detection of violation of the detector blocking contact
- security entrance
- alarming
- technological
- programmable technological
- Possibility of measuring the resistance of a loop and transmitting its value to the “S2000” remote control or “Orion” workstation
- Operation in case of disruption of the RS-485 interface and after its restoration, transmission of accumulated messages with the time of their occurrence to the “S2000” console or “Orion” workstation
- Connecting the "Dallas Touch Memory" key reader allows for centralized management (arming, disarming) of partitions and identification of a business entity
- Programmable logic control of five relays (37 local control tactics)
The difference between "Signal-20P" and "Signal-20P isp.01" is in the material and size of the case.
Designed for use as part of the Orion ISO for control various types security and fire non-addressable detectors, contactors and signaling devices with normally closed or normally open contacts and relay control of external actuators.
Description:
- Up to 20 radial alarm loops
- Programmable selection of alarm loop type:
- type 1: fire smoke two-threshold
- type 2: fire combined single-threshold (with the ability to connect heat and smoke detectors)
- type 3: fire thermal two-threshold (with recognition of the activation of one or two detectors in the AL)
- type 4: security
- type 5: security with detection of violation of the detector interlock contact
- type 6: technological
- type 7: security input
- type 11: anxious
- type 12: programmable technological
- type 16: fireman manual
- type 17: water alarm
- type 18: fire launcher
- Control of arming/disarming the alarm system and device output relays via the RS-485 interface from the control panel or ISO “Orion” keyboards
- Connecting a “Touch Memory” key reader for user identification and partition management (arming, disarming)
- Programmable outputs (37 local control tactics)
- Monitoring of two outputs for open and short circuit
- Two power inputs: for connecting the main and backup power supplies
Specifications:
|
PARAMETER NAME |
PARAMETER VALUE |
|
|
Number of radial non-addressable signaling loops (LS) |
||
|
Max. AL wire resistance excluding terminal resistance |
1 kOhm for security alarms |
|
|
Permissible leakage resistance between AL wires or each wire and ground |
20 kOhm for security alarms |
|
|
Devices connected to the AL |
Non-addressable security and fire detectors with relay output |
No restrictions |
|
Non-addressed security detectors, powered by shs |
with a total current consumption of up to 3 mA |
|
|
Non-addressable fire detectors powered by alarm system |
with a total current consumption of up to 3 mA (with a total current consumption of up to 1.2 mA when heat and smoke detectors are turned on simultaneously) |
|
|
Voltage at each AL input |
19 V ÷ 24 V when installing an end-of-line resistor of 4.7 kOhm ± 5% and a detector current consumption of 0 ÷ 3 mA, |
|
|
Current limitation in short-circuited loop |
26.5 mA (no more than 20 mA through a triggered detector, when the voltage at the detector is more than 6.8 V) |
|
|
Light indication |
1 mode display indicator |
|
|
Built-in buzzer |
||
|
Tamper sensor |
microcontact |
|
|
Non-volatile event buffer |
4096 messages |
|
|
Interface |
RS-485, Orion protocol, Orion 2.1 |
|
|
Power supply |
from external source DC |
|
|
Supply voltage |
10.2 ÷ 28.0 V DC |
|
|
Number of power inputs |
||
|
Current consumption |
in standby mode (depends on the number of current-consuming detectors in the alarm system) |
200 – 300 mA at 24 V supply voltage |
|
in Fire mode |
330 mA at 24 V supply voltage |
|
|
Ready for use after power up |
no more than 3 s |
|
|
External electronic identifier (EI) reader |
||
|
Interface of connected readers |
Dallas Touch Memory, iButton |
|
|
Reader LED Control |
Two LEDs (green and red). Control signal "+5V CMOS" with current limiting when directly connecting LEDs at 10 mA |
|
|
Control sound alarm reader |
||
|
Electromagnetic relays (dry contact) |
3 pcs: |
|
|
Electromagnetic relays |
2 pcs: |
|
|
Operating temperature range |
-30 to +50 °C |
|
|
Relative humidity |
up to 98% at +25 °C |
|
|
Housing protection degree |
||
|
Housing material |
"Signal-20P isp.01" |
|
|
"Signal-20P" |
||
|
Dimensions |
"Signal-20P isp.01" |
229x136x41 mm |
|
"Signal-20P" |
||
|
Block weight |
"Signal-20P isp.01" |
no more than 0.8 kg |
|
According to the instructions, "Signal-20P SMD" was developed and put into operation for operation in fire, alarm and burglar alarm. The fire and security control panel can be equipped with 20 communication lines in the system. Includes all types of firefighters and security equipment to detect and inform about the occurrence of fires or violations of the protected perimeter. General descriptionIn the description of the instructions "Signal-20P SMD" the device is listed as a device with control and reception functions security and fire system. Has technological capabilities to control up to 20 areas. Receives information from warning systems with automatic, manual or active mode. Has control over sound and light technical means of detecting and generating a fire signal. Operating in the RS-485 software shell, it receives commands and provides information to the network controller. Such control points, according to the instructions of "Signal-20P SMD", can be control panels of the S2000 modification or a personal computer with installed on it software"Orion" type. The device transmits “fire” and “fault” alerts to the fire department control panel. accepts from of this device alarm notifications. Interacts with Touch Memory electronic identifiers. Purpose of the deviceAccording to the instructions of "Signal-20P SMD", the purpose control device consists in subordinating to its functionality the processes of arming and disarming individual alarm loops. The device can also perform these tasks with a group of loops, depending on the instructions of the network controller. "Signal-20P SMD" monitors for breaks and short circuits on the lines to which the signal sirens are connected. The device provides connection alternative source power supply to the auxiliary input. Transmits the electronic ID cipher to the network controller for organized partition management. All necessary information on the state of the partition is displayed on an external indicator built into the device (according to the instructions of the "Signal-20P SMD").
The operation of the device is defined as addressable and only in joint group with the Orion security system. The Signal-20P SMD device is designed to protect premises and structures from fires and unauthorized access. Such objects most often become various offices of enterprises and companies, commercial buildings, banking institutions, warehouse areas, residential buildings and similar covered buildings. building structures. System operating conditionsThe instruction manual for the Signal-20P SMD recommends taking care of the device and puts forward a number of requirements for working with it. The device must only be installed inside buildings closed type with no heating. The power source is specially reserved for uninterrupted operation, or there must be two of them - the main one and the alternative one. The required voltage varies from 10 to 28 V. It is recommended to use power supplies model range"Rip" by Bolid company. It is strictly not recommended by the manufacturer to use the Signal-20P SMD device in dusty rooms, in explosive environments and in conditions where the device may be affected by negative environmental factors.
Proper performance is ensured by the device in conditions at an ambient temperature of -30 ℃ to +50 ℃, air humidity should not exceed 98% at +25 ℃. The vibration pressure should be in the range from 1 to 35 Hz. In an unsuitable electromagnetic environment, the quality of the operating functions is not guaranteed by the manufacturer. Technical parameters of the deviceAccording to the instructions, "Signal-20P SMD" can process the information volume of 20 signal loops. Carries out maintenance of up to five switched circuits, the number of control circuit inputs is 26. This number includes 20 fire alarm loops, an electronic identifier circuit, two circuits of the RS-485 interface shell, controlled output circuits of two relays and inputs electrical supply devices. "Signal-20P SMD" has 7 outputs. They are defined as 3 relay outputs for switching with a voltage of 28 V and a current of up to 2 A, 2 control outputs for connecting technical means of fire detection and signaling, two outputs that control an external electronic ID scanning indicator.
Information content of the systemThe device notifies about such events as:
Popular | ||
