Hanging systems for the kitchen. Railing systems for the kitchen: types and installation instructions. Why are roof rails needed?

Quite a difficult task of optimal placement kitchen utensils allows you to install railings in the kitchen. The railing most often consists of a fairly strong straight or curved tube fixed at a short distance from the wall or ceiling. Objects needed for cooking or other kitchen work are hung on this tube (directly or with the help of additional devices). For example, you can hang frying pans, pots, knives, spatulas, pouring spoons, ladles, skimmers and much more on the railing.

Railing is a pipe fixed at a short distance from the wall or ceiling.

Main types of roof rails

The most common type of railing is a not very thick chrome-plated steel tube, fixed to the wall surface using racks with holes and equipped with additional elements designed for hanging necessary items. These can be hooks, wire loops, nets, cells or rings for plates, bottles or glassware, towel clips, even a stand for a notebook or recipe book.

Depending on the mounting option and design, roof rails can be:

horizontal, straight or curved;
suspended, fixed to the ceiling on thin rods;
vertical, located above the working surfaces of tables;
combined, consisting of horizontal and vertical sections;
specialized, for example, magnetic.

Horizontal rails are the most common. They are usually mounted near frying plates, ovens, between the walls of cabinets or above the surface of cutting tables. These roof rails can be used both as a single system and in the form of separate sections located in necessary places. In addition, they can be installed in corner areas between walls or cabinets.

Hanging rails are installed in the free zone of the kitchen so that the kitchen utensils hung on them do not interfere with free movement. Often hanging rails

installed above the bar counter and equipped with holders for glasses, mugs and bottles. You can hang napkins or towels on them. Vertical railing allows you to save space above the working surface of the table; it can be installed not only on the wall, but also on the side surfaces kitchen cabinets

. If there is not enough free space in the kitchen, combined designs are used, including both horizontal and vertical elements. Specialized roof rails are usually intended for some type of kitchen utensil. These can be railings with a basket (for detergents

), magnetic (for knives, forks or spoons, etc.). Most often for the manufacture of roof rails, as well as fastening and hanging elements

steel with a polished chrome-plated or nickel-plated surface is used for it. However, at the request of the customer, the type of coating can be different, for example, silver, gold or copper, including various patterns and combinations of shades.

To install the railing yourself, you will need the following:
drill with drills;
level gauge;
screwdriver or screwdriver;
hammer;
hex wrench;

screws and dowels.

Choosing a location and installing a roof rail The location for installing the railing is selected based on the location of the kitchen furniture items and functional purpose individual elements and ease of use. Carrier length steel tube railing, regardless of the shape and options for its location, is limited only by the size of the room required free space

and, of course, aesthetic preferences.

The standard length of the railing is 3 m, but if necessary, it can be shortened or extended using special couplings and inserts. The ends of the pipe are closed with decorative plugs to ensure safety of use and give the structure a finished look. After the initial preliminary marking of the location, determining the length, number and shape of the rails, we install supporting structures, which will be the basis for attaching the pipes to load-bearing wall , ceiling or furniture walls

It should be taken into account that the installation step of the railing fastening elements should not exceed 0.5 m, that is, if a pipe 1 meter long is installed, then the number of points for attaching it to the load-bearing surface should be at least 3, 2 at the edges and 1 in the middle parts.

Markings for installing horizontal or vertical railing should be done using building level or a plumb line at the height required for hanging objects. When marking, you should take into account the size and weight of kitchen utensils hung on the railing and, accordingly, additional holders. If you plan to use the railing for massive objects, then the fastening step should be reduced.

Drilling holes for installing roof rails

As a rule, kitchen walls are finished with tiles, which are laid on concrete base. In this regard, drilling holes for the railing holders must be done with a special drill with a Pobedit tip or diamond coating using an electric drill or hammer drill.

After the final marking of the mounting points for the railing supports, “crosses” with a side length of 5-6 mm are applied on the surface of the tile at the drilling points using a diamond glass cutter. In this case, when drilling, the tile will not crack, the hole will be located at the required point.

To install a railing of small thickness with a relatively low mechanical load on it, you can use a drill with a diameter of 5 mm to drill holes. If it is necessary to provide large loads, it is necessary to use drills with a diameter of 8 mm or more. The depth of the holes is determined by the length of the mounting screws and the length plastic inserts into which the mounting screws will be screwed.

After the holes for attaching the railing posts are drilled, standard plastic plugs are inserted into them, the length of which corresponds to the length of the mounting screws. With their help it is necessary to secure the supports. Using self-tapping screws, intermediate fastening pins are secured to the ceiling, room walls or furniture walls according to the markings (for fastening load-bearing racks).

Care must be taken to ensure that the screws are tightened all the way and that the supporting pins are installed without any backlash or distortion.

The railing posts are placed on the supporting pins and secured to them using shaped screws. When installing, make sure that the screw heads are not visible. For example, on a horizontal rail they should be located at the bottom of the post, and on a vertical rail they should be located either on the top or bottom side of the posts (depending on the height of the mounting points).

Installing the roof rail tube on the supports

The racks or supports have special holes into which you need to pass the railing tube. The ends of the tube should be as symmetrical as possible relative to the posts; during installation, you should also avoid great force and try not to damage the polished surface of the railing. The final fixation of the tube in the holes of the racks is done with additional screws included in the delivery set of the railing. The ends of the tube are closed with a special plug, consisting of a plastic plug with a chrome tip attached to the plug with a screw. The plastic plug of the plug must be assembled, then hammered into the end of the railing pipe with light blows of a wooden or rubber mallet.

The final stage of installing the railing in the kitchen is installation on the supporting pipe required quantity hooks, support strips, nets, loops, special holders or rings. After this, you can begin hanging and placing various kitchen utensils.

Every housewife loves when there is order in the kitchen, appreciates comfort and coziness, so she tries to organize her workspace in the kitchen with maximum convenience. It is very important that the interior is not only attractive in appearance, but also functional and well thought out. Create ideal conditions In the kitchen, there are railing systems designed to store all kinds of kitchen utensils.

Every housewife who cares about her own comfort can use them in her home. Railings greatly facilitate daily work in the kitchen, and also eliminate unnecessary fuss in search of necessary items.

What are railing systems and what is their main purpose?

Under the unusual word “railing” lies the most ordinary metal rod that is attached to the wall. WITH in English the word is translated as “crossbar” or “rail”. This device is made mainly in the form of a pipe.

It serves for convenient placement and storage of all kinds of kitchen utensils and accessories: jars with spices, potholders, ladles, frying pans, lids, towels and the like.

To securely fasten the railing to the wall, special holders are used. All parts of this device can be made of different materials: brass, aluminum, steel, plastic.

The main requirement that is put forward to them is that they must be reliable and durable in order to easily withstand all loads and serve for as long as possible.

Initially, roof rails were used only in professional kitchens - in restaurants, canteens, cafes. But gradually their functionality was appreciated by ordinary housewives.

Most often, roof rails are sold complete with mesh shelves, hooks, drying racks, holders for cups, plates, paper towels and glasses.

Advantages and disadvantages

Railing systems have many advantages over conventional drawers and storage shelves:

they cost much less;
roof rails are sold complete with all necessary accessories;
such systems are very easy to install anywhere in the kitchen, regardless of its layout and size;
the roof rails can easily withstand very heavy loads;
the use of fittings allows you to use roof rails in any kitchen interior;
such systems significantly increase the functionality of the kitchen;
The roof rails are very compact and do not take up much space.

As for the disadvantages of such a storage system for the kitchen, there is only one - even the most modernized and modern roof rails will not replace a kitchen set, so housewives still cannot do without bulky drawers and cupboards.

What materials are used to make roof rails?

Railings for the kitchen can be made of different materials: brass, steel, of stainless steel, nickel, anodized aluminum.

To give the product a more aesthetic appearance, chrome plating is often applied to it.

All railing elements (plugs, hooks, fastenings) are made in the same color.

However, there are other options for making metal rails: depending on the style of the kitchen and its interior, the rails are coated with gold, bronze, or copper.

Also, the product can be made in black or any other color - such a coating not only makes the metal strip more attractive, but also protects it from corrosion and moisture.

When choosing a roof rail from a particular material, you should definitely take into account the future load on it. The most durable and reliable is a metal product.

To arrange small sections, it is worth using anodized aluminum strips.

The greatest resistance to all unfavorable external influences stainless steel is different. In addition, it can withstand maximum weight.

Types of roof rails and their features

Modern manufacturers offer their consumers these types of roof rails.

Horizontal, the most popular - depending on the area of the kitchen and its layout, such devices can be placed in separate sections, or along the entire wall in the form of a continuous line. Thanks to special fittings and hooks, entire systems of containers and shelves can be placed on horizontal rails.

Hanging- such roof rails are attached to the ceiling. Such designs are most often used to furnish rooms with a kitchen island in the middle or a bar counter.

Vertical- installed directly on the floor or on the countertop. This device equipped with special shelves for storing dishes and other kitchen utensils.

The easiest to install are horizontal rails, which require the least amount of equipment for fastening - all you need is screws and holders.

Correct placement of roof railing systems in the kitchen

Where should it be located? railing system so that it can be used with maximum functionality?

People who regularly use cling film can install a convenient holder with teeth, which helps to smoothly and quickly tear off foil, cling film, baking paper, etc.

Connoisseurs of good wines will appreciate the reliable bottle holder and special hanging bar.

Directly above the work surface you can place a holder for kitchen knives, ladles and other utensils.

It is better to place a rail with towel holders near the sink, where you can also install a hanging dryer for plates, household chemicals and sponges.

A lid holder should be placed next to the stove.

For cutting boards You will also have to allocate a separate shelf.

A special railing system should be attached directly under the wall cabinet, so that wine glasses and cups will always be at hand.

Advice: The less frequently kitchen items are used, the farther the rails with holders for them should be located from the work surface.

Creating an island kitchen using railing systems

It is difficult to imagine a comfortable island kitchen without rails located directly above the dining table.

This system is usually attached to the ceiling; it helps to properly organize the kitchen space without resorting to the use of cabinets.

If the size of the room allows (and spacious rooms are usually chosen for arranging island kitchens), then you can make the space more interesting by placing rails above the table on different levels. This is quite a painstaking job, the implementation of which should be entrusted to specialists. Such roof rails will not only increase the functionality of the kitchen, but will also help visually zone it.

It is also very important to think about the style matching of the railing systems and the room itself in which they are installed.

The use of roof rails depending on the style and design of the kitchen

Designers often use railing systems as separate elements of kitchen decor. It is very important to take into account general style interior

Modern style, as well as high-tech styles - you can use chrome-plated steel rails or nickel structures. Their metallic shine will fit perfectly into the interior of the kitchen and emphasize its modernity.

Provence style, country and country style- rails made in a forged style, with bronze plating or decorative gilding, will harmoniously fit into such an interior. Pans, colanders, saucepans should be placed on the hooks; embroidered towels, bunches of onions, garlic and lavender would look appropriate on them.

Classic style - you should choose copper rails, or coated with matte coating. Gold, bronze and copper will look great in such an interior. All elements should look solid and expensive.

Japanese style and minimalism - it is best to completely abandon the use of railing systems, since such interiors should look as laconic and restrained as possible. The abundance of decorative elements and many details completely “kills” these styles.

American style - a railing system attached to the ceiling directly above the dining table or kitchen island will fit perfectly. It should look modern, sound and reliable.

Whatever style is chosen for arranging the kitchen, it is important to use roof rails wisely, without overloading the room with such structures. Play up metal kitchen utensil holders with various interiors The design of the premises is not difficult - you just need to show a little imagination and first familiarize yourself with the requirements of the chosen genre.

Some tricks will help the housewife to use railing systems with maximum benefit. For example, special magnetic parts attached to the structure will be an excellent device for storing knives.

The main rule for installing a railing system is that it should be positioned in such a way that you can take the desired item without hindrance and without unnecessary movements.

It is very important to adhere to safety rules and secure structures in such a way as to prevent the possibility of them falling or objects being held on them falling, which could lead to injury to household members.

Rails are a universal and convenient thing that not only makes the kitchen more convenient, but also serves as its decorative decoration. With proper care and correct use, they are capable of serving for a long time.

Railing system - what is it?

The term "railing" comes from English word“rail”, which translates as “rail”, “crossbar”, “hanger”. The railing design is essentially a crossbar attached to wall cabinets, an “apron” or above a kitchen “island”. This simple but convenient design is designed for storing fittings, accessories, kitchen utensils, containers with spices, towels, etc.

Functionality of the railing system

Thanks to the railing, the kitchen workspace has great possibilities. The cooking area increases, it becomes more spacious, free and neat. The railing, which is most often just a pipe, acts as a base. A variety of accessories are additionally selected for this or that function.

A great convenience is the ability to create a unique railing system for any kitchen set and interior. IN small spaces This design is especially convenient, as it will save a lot of space.

The railing looks like a cornice - a tube with auxiliary elements: shelves, hooks, holders. The edges of the railing are decorated with plugs, which are necessary for the safety and aesthetics of the structure.

Hooks

Hanging elements are presented in the form of hooks different sizes. They are designed to hold scissors, ladles, skimmers, spatulas, mugs—anything you can hang on a hook.

Mesh shelves

This element is applicable for containers with spices, coffee grinders, mixers, detergents and cleaning products. Here you can place flowers in pots or just put fruit.

Holders

These devices have a variety of configurations. They can be used to store food, towels, wall-mounted bread bins, knives, cling film, and foil.

For decor lovers, roof rails are a great find. You can place vases and other things that create beauty and comfort on them.

Choosing a railing system for the kitchen

The range of such devices on the market is quite wide, so you can easily purchase a design for a specific interior and kitchen size. All roof rails have a chrome-plated, stainless steel base, onto which one or another spray coating is subsequently applied: brass, bronze or copper. The actual design and design of the roof rails is created by spraying. They can be glossy, matte, with or without backlight. There are even designs made of durable glass.

Color too important detail in the interior and should not be neglected. Manufacturers also treat this issue responsibly and create lines of this product of a wide variety color shades. For example, a shiny steel rail will easily fit into the interior of a high-tech kitchen. And in a classic style or “Provence” interior, roof rails with gold, bronze or copper plating will look elegant and tasteful.

Illuminated designs are stylish and comfortable. For a kitchen with an island, you can choose a system that is attached to the ceiling. This will help highlight the island area, save space, and add convenience, because everything you need will be located nearby on a suspended structure.

Installing roof rails in the kitchen

The railing structure can be efficient and stretch along the entire length of the kitchen unit, or it can consist of small pendants at different points: above the sink, above the work table, etc. The installation time of such a system is about half an hour, and the procedure itself is elementary.

Important! Railing is necessary in order to save not only space, but also time. Therefore, such a system should be mounted in the area where it is most convenient for you to cook, and not at the other end of the kitchen.

The railing design includes the crossbar itself, 2 plugs on the edges of this crossbar and brackets for fastening to the surface (or other mechanisms for attachment). Before fastening to the crossbar, place auxiliary materials which were listed above. Such accessories can be moved, but they cannot be removed.

The installation process consists of 5 steps:

make a hole in the selected location with a hammer drill or drill;
install the fasteners in accordance with the instructions;
attach additional elements to the crossbar (hooks, shelves, holders);
install the roof rail;
put plugs.

Important! The railing structure is installed at a height of 8 cm from the bottom of the hanging cabinets. Fastenings must be strong, reliable and able to withstand the weight of the utensils suspended on them!

Methods for attaching roof rails

What to consider when installing roof rails

When installing the structure, follow the rule: the owner must reach the railing without leaving her place.

If you use ceiling structures, you must be absolutely sure of the reliability of both the roof rail fastenings and the surface to which they are attached.

Place items and kitchen utensils on the railing system in accordance with their frequency of use. Things that you cannot do without in any situation should be nearby. And what you apply once a week can be moved further away.

Complementary hardware includes a towel holder with a serrated edge. This mount is convenient for paper towel rolls, cling film or parchment - it’s easier to tear them off.

Do not place ladles, spoons, knives, skimmers above the stove so that they do not become covered with steam and grease.

If you use a cookbook often, place it nearby on the slanted shelf of the railing system.

Kirill Sysoev

Calloused hands never get bored!

Content

The kitchen has always been a place where apartment owners spend a lot of time. In the modern approach to interior design of an apartment or house, it has an important place. When planning the main design solution for a house or apartment, the customer decides on the design of the kitchen. When choosing a minimalist high-tech or classic style with a lot of wooden parts The interior determines the style of the entire railing system, the set of kitchen accessories necessary for every housewife, and the places where the kitchen rails will be located.

What are roof rails for the kitchen?

A horizontal or vertical tubular rod for kitchen utensils is called a rail. It can be round, flat, rectangular or square, mounted on the wall or on wooden upper cabinets in the kitchen. Their main functions are to clean the surface of countertops for culinary processes and to bring the most necessary accessories for cooking closer to the place of their use.

Types of roof rails

Modern kitchen interior design uses chrome-plated round and rectangular rod designs. Their shape should emphasize the chosen style of the room:

Co light colors Kitchen furniture goes well with glossy chrome, white and black colors of hanging structures.
IN classic interior Structures and hanging parts made of glossy and matte brass, sprayed with gold paint or an antique bronze coating, look good.

How to position

Most modern kitchens can't boast large sizes and the spaciousness of the kitchen furniture. In such cases, it is possible to use only horizontal structures and their location near stoves or gas surfaces, sinks, and food preparation work areas. They are mounted on the lower surfaces of wall cabinets, shelves or on the wall. Vertical ones are attached at the ends kitchen sets as the final design touch. They are used in the design of bar counters when installing the top shelf on which glasses are attached.

How to install correctly

Vertical metal structure requires reliable fastening to the floor and on all shelves of the bar counter. The reliability of this design is ensured by at least two rigid fastening points. The horizontal kit sells several fasteners containing a flange with 1 or 3 holes for screws or fastening with a coupling, and a ring for the railing itself. During installation it is recommended:

mark the mounting points for the kitchen railing;
secure the pipe fasteners;
When installing, immediately attach the hooks; to prevent the hooks from falling, their fastening part must have a ring shape and completely cover the railing;
install hanging elements.

Buy roof rails for the kitchen

Such systems are sold in large construction supermarkets. View a large range of designs and choose different variants By color, brand, quality of parts, price, online stores make it possible. Promotions, discounts, and sales can significantly reduce the prices of purchased goods. On the site you can choose, pay for goods, order cheap or free delivery by mail or courier service. When purchasing more than 3,000 rubles, Moscow stores deliver the purchase to your address at their own expense.

Vertical

Chrome vertical kitchen rails are a stylish design find, which, in addition to an aesthetic purpose, serve as the fastening side of the bar structure. Several are attached to it swivel brackets with shelves or baskets in which tea sets, glasses, and fruits look good. This type of fastener uses pipes with a diameter of 5, 7 and 10 cm. This structure carries a support load, so it requires rigidity.

Bar counter pipe with durable waterproof coating:

model name: bar pipe (length 3000 mm);
price: 8250 rubles;
characteristics: diameter 50 millimeters, wall thickness 1-1.2 millimeters, made of stainless steel with a polymer multilayer coating, color – matte chrome;
pros: durable mounting pipe large quantity hanging elements;
cons: expensive.

Many designers will like a spiral-shaped fruit basket mounted on a vertical bar rod:

Model name: hanging fruit holder;
price: 663 rubles;
characteristics: width – 295 mm, length – 295 mm, height – 260 mm;
pros: convenient mounting at any height;
cons: takes up a lot of space on the pipe.

Horizontal

Horizontal railing systems for the kitchen are a metal pipe made of stainless steel with a diameter of 1 to 3 cm coated with copper, nickel, glossy or matte chrome. In classic-style kitchens finished with wood or MDF in woody colors, brass or stainless steel with a bronze finish is used. Attach the rails to the bottom surface of hanging shelves or to the wall. Plastic wall coverings in the work area protect the wall from splashes of water when washing dishes or drops of oil when frying meat dishes.

Full set chrome system Chinese manufacturer Lemax with a total length of 2.8 meters with rotating elements:

model name: 44-piece set with hanging accessories, chrome color;
price: 8300 rubles;
characteristics: 8 wall shelves for various purposes, 5 hanging spice jars, 5 small and large hooks each, end caps, fasteners;
pros: will allow you to fully complete the kitchen system;
cons: not noticed.

Jamie Oliver work area system:

model name: horizontal model for knives;
price: 737 rubles;
characteristics: compact system for placing knives and other accessories;
advantages: appliances and tools are in front of your eyes when working in the kitchen;
cons: not found.

Hanging

Hanging structures provide the opportunity to place pencil cases in an easily accessible location near the food preparation area and not clutter them up with pots. They are mounted on the ceiling or upper horizontal surfaces of the kitchen. This design, when hanging stylish flower pots, can decorate the kitchen space. This system looks like a grid suspended by cables or attached by rigid metal rods to the ceiling. The grille has hooks on which to hang frying pans, pots and even hanging flower pots.

Great idea– place a hanging bar:

price: 2635 rubles;
characteristics: hanger for placing 4 wine bottles, 4 glasses and 4 cups;
pluses: width 730, depth 300, height 345 millimeters, complete with mounting hardware;
cons: requires a lot of space on the bar console.

Tescoma Monti design is used when a large hanging area is needed necessary accessories:

model name: hanging cornice rail;
price: 2208 rubles;
characteristics: installation kit for cornice 60 cm long;
pros: durable metal with moisture resistance;
cons: difficult installation.

For glasses

It’s hard to imagine a bar counter without a coffee maker and a stand for wine bottles, but chrome guides for hanging glasses will serve as decoration. Several types of glasses with different thicknesses the legs require the installation of rails with grooves of different widths. A variety of accessories for bars can turn it into a multifunctional kitchen island with storage systems for bottles, fruits, and confectionery.

Hanging device for glasses with a high-strength polymer glossy chrome coating manufactured by Kessebohmer from Germany:

Model name: hanging bar;
price: 16580 rubles;
characteristics: width 930, depth 300, height 280 millimeters, chrome gloss;
pros: the elegance of the design will be noted by many users;
cons: very high price.

The arched glass holder looks great on the canopy of the bar counter:

model name: arched glass holder;
price: 305 rubles;
characteristics: width 930, depth 300, height 280 mm, glossy chrome;
pros: original design;
cons: not noticeable.

Accessories for roof rails

A set of steel accessories, in addition to the pipe, includes a main fastener holder, end caps, and rotating elements. Mandatory elements are hooks for hanging potholders, spatulas, ladles, and other accessories. Accessories for kitchen rails include hanging shelves for various purposes. Rotating shelves, round and square baskets, and clocks are mounted on vertical structures.

Set of hanging spice jars from the Czech company NADOBA:

model name: set of hanging spice jars, NADOBA (Czech Republic), BOZENA series;
price: 1259 rubles;
characteristics: 3 beautiful glass jars of different spices;
pros: convenient fastening makes it easy to remove and hang the jar;
Cons: you need to unscrew the lid of the jar.

Wall mounted stylish mechanical watches for kitchen railing:

model name: kitchen clock;
price: 629 rubles;
characteristics: width 90, depth 90, height 165 millimeters;
pros: the clock is in front of your eyes when working in the kitchen;
cons: not found.

Railing hooks

For kitchen work areas that are different in functionality, different numbers of hooks are used. The chrome rod is equipped with hooks made of the same material. Brass - with hooks made of brass rod. The shape of the hooks is made according to the type of supporting structure. Mostly hooks with a round fastening ring and double models are used. A plastic round plug is attached to the side of the hinged part of the hook. Hooks do not carry a serious mechanical load; they are used for hanging small kitchen accessories, kitchen apron, potholders.

Connoisseurs of beauty in small details will be pleased with the systems and components of the Italian company Herbarika self made:

model name: “Lizard” hook;
price: 2000 rubles;
characteristics: the lizard figurine on the sheet is made by hand from brass;
pros: a beautiful product coated with antique bronze will not only decorate the kitchen, but can also carry a functional load;
cons: high price.

A set of railing hooks from a Czech manufacturer is distinguished by high quality seams and small details:

model name: NADOBA company (Czech Republic), BOZENA series;
price: 284 rubles;
characteristics: size 4x0.6x7;
pros: steel High Quality with chromium-nickel coating more than 10 microns thick;
cons: high price.

Railing shelves

The variety of accessories used in the kitchen gives rise to different types of hanging elements of railing systems. Attachments includes baskets and shelves for storing kitchen utensils. In sets equipped with a corner sink, corner suspension systems are used. Special holders and vertical wall bars make it possible to place rails of different lengths one behind the other or one above the other and hang shelves various types, sizes, purpose.

There are many railing systems produced in Russia. One of them is the MIX spice rack from Stillwood in black velvet:

model name: shelf for spices MIX;
price: 2725 rubles;
characteristics: guide railing railing design is made of flat perforated square holes metal strips;
pros: the design of the entire system in the Art Nouveau style is interesting;
Cons: only components from this series are suitable.

The Italian company Lemi offers a hanging kit, which consists of a suspension and a removable shelf:

a set of jars of spices and sauces (4 items) in chrome color;
price: 9648 rubles;
characteristics: 4 glass saucepans for vinegar, ketchup, soy sauce, sunflower or olive oil;
pros: a comfortable handle will help you remove the shelf from the hinged part and place it on dinner table;
cons: high price.

Railing fasteners

The horizontal rail holder for the kitchen is designed for attaching it to a wall or shelves. The shape of the holder mount is made in the form of a flange, or in the form of a metal parallelepiped, which is attached to the wall with a dowel, and to the wood with a self-tapping screw. The stylish cap of the holder is screwed to the base with special countersunk screws. Fastening is done with an L-shaped hex key. When fastening vertically, it uses an upper and lower flange, intermediate rings for fastening shelves and baskets. When installing them at the end, two side fasteners are added.

Railing pipe holder made by Italian company Lemi in gold color:

Model name: pipe holder;
price: 310 rubles;
characteristics: gold plating;
pros: hidden fastening adds beauty to the entire structure;
Disadvantages: Drywall will not work when attached to a wall.

Flange mounting of vertical railing from Chinese manufacturer Lemax:

Model name: 16mm pipe flange;
price: 20 rubles;
characteristics: inner diameter 16.5mm, overall diameter 38mm (wall thickness 3.5mm), RHA-17, chrome;
pros: the thickness of the wall will allow you to securely fasten the railing;
cons: not found.

How to choose roof rails for the kitchen

You should start choosing a railing system by determining its color:

For modern furniture models with a predominance of glass, bright plastic, and aluminum parts, the choice of chrome rails is preferable.
For kitchens with a predominance of yellow-brown or woody colors, it is worth giving preference to designs in the color of gold, brass or antique bronze.
In the organisation kitchen space beautiful and simple designs add elegance to the interior.

Reading time: 8 minutes.

Every housewife strives to ensure that her kitchen is practical, functional and cozy at the same time. It is very convenient when everything you need for cooking is literally at hand and there is no need to constantly open/close cabinets and drawers to get necessary equipment. Railing in the kitchen will help you arrange convenient system storage of utensils.

Rails and their advantages

Rails are a comfortable and simple design in the form of a pipe, which is most often installed under wall cabinets or along the edge of the tabletop. On it, kitchen accessories, towels, potholders, spoons, dryers, containers for storing spices and other utensils are placed on hooks and hangers.

Railing in the kitchen increases the functionality of the workspace, allowing you to get rid of some of the bulky cabinets. The kitchen begins to look spacious and cozy.

Externally, the roof rails resemble a cornice, consisting of a main element - a tube and fasteners. A huge number of all kinds of accessories are produced for roof rails - shelves, hooks, holders, etc. The tube is covered on both sides with plugs, giving it an aesthetic appearance.

The peculiarity of the system is that it can be matched to any interior and any size of the kitchen. For a small kitchen, roof rails are the solution to many problems. One of the important advantages of the railing system is its mobility. Accessories can be swapped and moved at any convenient time.

In addition to the above, the advantages of roof rails include:

placement anywhere;
the presence of numerous additional accessories;
favorable price;
ease of installation;
strength;
ability to withstand heavy loads.

Kinds

There are 3 types of roof rails:

Horizontal placed in sections or drawn in one line along the wall. On hooks for horizontal rails you can place systems of shelves, holders, containers and individual items dishes. Horizontal rails also include corner systems that usually run above the sink.

Vertical rails mounted on countertops or cabinets, installed between the floor and ceiling, they are often used in a bar counter system. You can attach hanging shelves and coasters to them.

Hanging rails suspended from the ceiling. Typically, such systems are installed by owners of island kitchens.

Accessories

Properly selected accessories improve the functionality of roof rails, expanding the number of items that can be placed on them.

Hooks are the basis of all railing systems. Shelves, nets, containers, and holders are hung on them. They often act as an independent element of the system. Ladles, skimmers, mugs, scissors, etc. are hung on them. Some housewives even hang frying pans and saucepans on hooks.

Shelves are available in a wide variety:

They are great for storing a variety of things. They are convenient for arranging jars and containers for spices. You can place tall and long cans and bottles on shelves with long hangers. They even sell a slanted shelf to accommodate a cookbook with open recipe, which will be convenient to hang over work area.

In mesh shelves located near the sink, detergents and cleaning products, fruits that drain after washing, etc. will find their place. Mesh shelves are sold in a variety of configurations: rectangular, square, sector-shaped, round, oval, etc. Mesh shelves are also good for storing spatulas and a slotted spoon near the stove. This is where the stirring and turning processes take place.

The holders can accommodate whisks and spatulas, paper towels and food foil. There are holders for wine glasses, glasses, bottles, cups and other utensils. For paper towels, you can purchase a towel holder with a serrated edge to make them easier to tear off. The place for such an accessory is near the sink.

In addition, you can list such accessories as suspension systems for storing spices, wall-mounted bread bins, baskets, glasses for kitchen utensils, dryers, soap dishes. The systems can be supplemented with magnetic elements, convenient for storing knives.

Railings are a great way to decorate the kitchen interior beautiful dishes and other decorative accessories. They can be used as a support to create additional lighting for the work area by placing small directional LED lights on them.

What color are the roof rails?

Rails are made of metal (stainless steel, aluminum, brass), polymers and wood. Stainless steel rails are the most common due to their practicality and affordability. You can choose roof rails for the kitchen different colors: chrome plated, with gold, copper, bronze plating, black nickel plated. Plugs and other fittings are available to match the color of the railing.

Here it would be appropriate to talk about the withstand load, which must be taken into account when choosing a roof rail. An anodized aluminum product is not suitable for use over a large area. Aluminum railing can only be done in small sections. Of course, stainless steel has the greatest strength.

When choosing the color of the railing system, you need to focus on the style of the kitchen interior and color kitchen appliances(stoves and hoods), as well as furniture handles.

How to choose roof rails for your kitchen interior

Pipes are not suitable for a kitchen in a minimalist style. The laws of minimalism require a minimum of details. Spices, towels, kitchen utensils - all this is conveniently placed on the crossbar, but is completely unsuitable for a strict minimalist kitchen.

In interiors where there is room for charming little things, the railing will come in handy. It looks great in the interior of Italian and Mediterranean cuisine, and will fit stylishly into Provence and country. For classic and retro styles, rails made of bronze or gold are suitable. Wooden rails look good in classic kitchens, matched to the color of the kitchen furniture.

Chrome-plated systems will look good in modern high-tech kitchens. For modern fashionable lofts, steampunk, industrial, you can find excellent models of systems assembled in the style of water pipes in specialized stores.

To create a certain style, it is important what hangs on the railing. Checkered textiles and jars-boxes painted using the decoupage technique are suitable for the shabby chic style. Small pots with fragrant herbs, large glass jars for tea and coffee will complement Provence. Wooden grinders for salt and pepper, copper mortars for spices will decorate the retro interior.

As for ordinary urban interiors, it is important not to overload the roof rails. A few large elements and small ones will be enough. For example, you can place a set for spices, oil and vinegar near the stove, a hanging shelf with cups and tea jars closer to the eating area, and a mixer near the work area.

Installing roof rails in the kitchen

Placement of roof rails
Traditionally, railings are placed near the work area in the apron area so that the housewife can conveniently reach kitchen utensils with her hand while working in the kitchen. Don't limit yourself to just one roof rail: consider several options.

For example, one long rail 1-1.5 m long can be hung above the work area, and a short one can be hung next to the stove and sink.

In some interiors, additional fastening of horizontal pipes on the side walls of the cabinets will look organic. For corner places, you can buy systems bent at right angles. If you place the crossbars on different heights, you get not just a distribution of objects, but also an original decorative element.

The crossbar should be located at a height of 40-50 cm from the countertop. When placing rails under wall cabinets, a distance of 8 cm from them is considered optimal. In an island kitchen, hanging systems are often placed above the dining table.

When placing accessories, try to adhere to the rule: items that are often used should be placed closer to the work area.

For example, shelves with salt and pepper, lighters, and potholders would look appropriate next to the stove. Spoons, ladle, skimmers should be kept further from the stove so that they do not get dirty with splashing fat.

Railing installation
Installation of the railing begins with markings. The starting point, the end point and several intermediate ones are marked if the railing is long. It is recommended to install the railing holders at a distance of 50 cm. For more accurate markings, it is more convenient to use a laser level.

In selected places, holes with a diameter of 6-8 mm are drilled to attach the supports of the holders. If the railing section falls on a tiled apron, the holes are drilled with a special tile drill. Dowels are inserted into the holes (usually they come complete with railing systems) and support pins for the holders are attached to them with self-tapping screws.

The railing system is assembled in accordance with the assembly instructions: plugs are attached, holders are put on the pipe. There should be equal distances from the plugs to the outer holders. If necessary, the railing pipe can be shortened with a regular hacksaw.

The system, together with the holders, is placed on the supports. Using a hex key, tighten the bushings that secure the holders to the support until they stop. The holders must be positioned so that the fixing screws are at the bottom.

There is another assembly sequence. Holders are immediately placed on the supports, through which the railing pipe is pulled. The holders are fixed on the pipe. Finally, plugs are placed on the pipe while hanging. Each master chooses how it is more convenient for him to assemble the railing.

If the system passes through a corner, you will have to purchase additional special corner connections. Corner connectors are either 90 or 135 degree arcs. They are attached without holders, connecting straight rails to each other.