Help on Tele2, tariffs, questions

A person’s desire to decorate the territory of his dacha, to create a wonderful, cozy atmosphere using things at hand, contributed to the emergence of many design ideas.

The original material for implementing extraordinary ideas is old car tires.

Entertaining crafts made from tires for the garden will decorate both flower beds and playgrounds, as well as paths. Tires and tires can be used not only to create elements of garden decor, but also for practical purposes - they can be used to build a swimming pool, furniture, swings, sandbox, and bicycle parking.

The photos below show extraordinary ideas crafts made from tires.

Idea No. 1. Making a flower bed from tires

Most easy scheme– we take an unnecessary tire, fill it with soil and plant plants. Of course it won't be unique decorative element garden design.

To fix everything, we take bright colors(acrylic or oil based) and paint the tires. Next, we place them on top of each other, resulting in a multi-tiered flower bed.

An original solution would be a vertically located flower bed, folded in the shape of a pyramid. We fill the soil inside and plant climbing flowers - petunias or strawberries. On top you can place a pot with a single plant.

You can also make a hanging flowerbed from tires. For this you will need steel chain– it will need to be attached to a tire and the entire structure hung on a tree.

To prevent the soil from spilling, cover the bottom of the tire with a thick sheet of rubber or other suitable material.

An unusual solution would be to make flower beds in the form of a teapot and cups. All you need is a few tires and some scrap metal tape and pipes.

Idea No. 2. Tire figures

Another type of crafts made from tires for the garden are a variety of unusual and intricate figures made from tires. They will enliven your garden and improve the mood of everyone in the household.

The figure of a swan is very popular. To make it you will need a tire without metal cord. It must be pre-marked.

For cutting, use a well-sharpened knife. Secure the swan neck with a metal rod. The final step is to coat the resulting product with white or black paint (depending on what kind of swan you want - white or black).

It’s enough to simply create a funny horse, zebra or giraffe. Such figures will require installation in the ground wooden beam medium size including tire.

Crafts should be painted in colors corresponding to a particular representative of the fauna.

It's easy to turn old tires and cans into a frog or a cute turtle. A little imagination will help you make interesting and unusual installations.

Note!

Idea No. 3. Country furniture

Furniture made from tires will look great in the garden.

They can be made in different styles and the use of different upholstery materials, ranging from leather and textiles to wicker and wire.

The tires will make a comfortable chair in which it will be wonderful to relax in the lap of nature. To do this, we take tires and wrap them with intertwined straps and ribbons. It won't take much time, and the result will be entertaining.

You can make garden furniture from different-sized tires of medium and low hardness.

Tires make beautiful tables, ottomans, armchairs, chandeliers, fountains and washbasins.

Note!

Idea No. 4. Tire swing

Swings are an integral part of any playground. Tire swings are safer than those made of wood or metal. They are quite simple to make.

You will need:

• strong horizontal branch;
• sharp knife and jigsaw;
• chain or strong rope;
• tire.

We tie the end of the rope into a loop; the knots must be strong and reliable. We throw the loop over the branch, pass the rest of the rope through it and tighten it. We place the tires perpendicular to the ground.

We pass the rope through them and fasten it at a height of approximately 0.9 m from earth's surface. The swing is ready!

Idea No. 5. Tire track

Paths created from waste tires, or rather from their tread part, look unusual and original.

We present to your attention a selection of photos various crafts from tires.

Note!

Tires are a universal material for creating a wide variety of things with your own hands.

Numerous master classes on crafts made from tires can be easily found on the Internet. Therefore, if you have unnecessary old tires lying around, feel free to put them to work, creating memorable elements of garden decor.

Photos of crafts made from tires

(ArticleToC: enabled=yes)

Recycling car tires is becoming an integral part of our lives. Everyone solves this problem in their own way. Tire car for the playground! Many people like this idea.

The kids are simply delighted with this craft, and adults look at it with admiration. Considering that the tires are resistant to negative external influences, this design will please the eye for many years.

For parents with small children, arranging a playground in their country house or street will require little time and do not require any financial expenses. And the children will play without distracting their parents from important matters.

You can make crafts for such a site yourself, even if you have never done this before. Ideas and work procedures can be found on the Internet. They are most often used to make plastic bottles and tires. There is nothing complicated in manufacturing.

The main thing is desire and a little time.

You will not need to spend money on purchasing expensive materials, since the tires will be gladly given away by car service workers, who usually have a sufficient amount of them. What craftsmen do not make from tires: swings, sports equipment, flower beds, etc.

Types of cars

Transport is a constant success among boys, and even modern girls. Therefore, you can start by making a car for children. A car made from tires for a playground can be various brands(types) - from very simple to quite complex.

Instructions for making a car from wheels

The most simple option will bury a steering wheel from a real car and a seat into a quadrangle made of tires.

It is better to choose a place for the site where the craft will be installed that is illuminated, spacious, and located close to the house. The best coverage There will be a backfill of sand or a lawn that will have to be cleared of stones and glass to protect the kids from injury.

Machine-shop

It won't be difficult to make it. To do this, after thoroughly cleaning and painting the board, it is secured between tires of the same size. These will be the rear wheels. The front ones can be done in the same way. But you can install only one wheel in the center so that the craft resembles a racing car.

The depth of the holes for the wheels of the car should be such that the latter are hidden up to the disk. Then transport will be sustainable. After covering them with soil, compact it well. It is better to dig in tires with rims. But, if they are not there, you can replace them with plywood to give the structure rigidity.

Linoleum is used to imitate flooring, but it can be replaced with plywood. To prevent the wind from picking up the linoleum, it is advisable to dig the steering wheel into the ground through it. The tilt of the steering wheel is selected in accordance with the height of a particular child.

Truck made from tires

Make as truck Maybe a children's sandbox.

Manufacturing of seats

The seat can be made from one tire or by placing two on top of each other.

In the simplest version, they are limited to mounting plywood on tires. If you want to make it more comfortable, you will need a backrest. You can upholster the seat with something soft - foam rubber, carpet, blanket.

A plastic chair that is not used at home, wooden seats from chairs, or old armchairs will do. Having sawed off the legs, they are fastened, fixing them with self-tapping screws.

The parts are washed and dried well before painting. After this, the brand new car is painted in your preferred colors.

To make the craft more similar to the original, headlights are added. Jar lids will work for them.

And the next model is for the kids of the whole yard, because it allows you to travel with a large group.

What else will help make it look like a real car?

Doors attached to the craft will undoubtedly make the craft look like a real car. For playing with the machine large quantity children, make several rows of seats (2-3). If there is an extra tire, make a spare tire by attaching it to the back and writing the number in paint.

A car roof covered with linoleum, in addition to making it look like a real car, will protect from sun rays and light rain. To secure it you will need wooden blocks, shaped like the letter “P”. You need 3 pieces in total. Two structures are installed in the rear part above the machine (it is better to dig them into the ground), the third is closer to the front. They are connected from above with bars to form a horizontal frame, onto which linoleum is secured on top with screws or nails.

For a racing car you need to find 5 tires of the same size. A little effort from parents and they will turn into a wonderful car that will not leave the child indifferent.

Three tires are enough to make a car like the one in the photo below. On it, little racers will not be able to race across the expanses of the planet, but they will play with pleasure.

For “cool” kids you can make a motorcycle. You really have to use your imagination. But the happy faces of the owners of such bikes will be a reward for caring parents.

Video: Racing car made of wheels and tires.

In previous articles we discussed in detail how to decorate garden plot and any other territory, how to use dozens in various ways and how to make a variety of creative and safe things out of tires. Today we will raise the topic of children's sports grounds, which are one of the the best ways recycling a huge amount of used rubber, thereby helping the environment, as well as arranging courtyards and children's sports grounds where the state is not able to take care of it. For example, in the countryside, in remote ordinary villages and poor dacha-type settlements, simply no one except you yourself will build a playground, which is so important for children in the summer.

Similar children's sports grounds are good with a large variety of shells in defiance of the beautiful, bright, but very limited commercial yard structures. The main thing here is ideas, availability of hands and time. In addition to the wheels, you will need wood, as well as a lot of fasteners, bolts and nuts and sand, and possibly some chains.

Remember that, despite the fact that children will walk on the tires with their feet, rubber that has served its purpose on dirty and toxic roads must still be washed in a strong cleaning solution before use, then rinsed with water under strong pressure.

So let's get started: ideas and short description. In each example, pay attention to the size and thickness of the tires and their parts. Key moment The key to assembling such play structures is that each tire must rest against something above and below or be suspended from something - also most often both above and below, so as not to deform too much during use - under the weight of children.

First of all, these are, of course, bulk and hanging structures, along which you need to climb up: at an angle, vertically, or onto some three-dimensional figure.

This simplest form- “Wall”, when you have to climb up on one side, climb over the crossbar from above and go down on the other side.

Vertical hanging wall from tires on chains for older children.

Another inclined wall, where the tires are nailed entirely to a wooden sheet, and mulch or sand is poured between the tires and into them below. Pay attention to the cable-rope running from above: you can climb the wall by grabbing the tires with your hands and resting your feet on the bottom ones, or you can climb by walking with your feet and moving over the cable to keep your body position perpendicular to the canvas.

Analogue - without mulch, but tires different sizes, so that the climb is absolutely safe, but a little more difficult.

Again, a wall with a slope, but pay attention to the “goats” made of wood, and also to the fact that the two lower rows of the wall are made of tires, and the two upper ones above them are made of tire tubes.

Low incline hanging wall for training agility and balance.

The same thing, but with a greater slope and made from half car tire tubes:

An analogue is a suspended track made of tires.

All kinds of other volumetric structures for climbing:

Worth doing it in 3 levels

And here they made ladders from tires, and dug them into an embankment of sand and earth. In some cases they were used as a ladder for slides.

Finally, a very interesting general “swing” made of tires (for a group of children), on which you can climb and sit, but you can hardly swing.

Various hanging structures various formats between the bars or a side support made of tires: in the middle the tires can hang or be fixed/lie statically, placed vertically or horizontally.

The next idea is tire tunnels, but the tires must be of the appropriate size. Tunnels can be ground or mounted (on chains) for older children (in this case, the tires must be fixed both from below and from above, so that the wheel does not suddenly “move” to the side when the child is inside) or on a beam (at the same time, so that someone - it didn’t fall out, the tires should occupy the entire space between the vertical posts). Using wood between large tires or concrete pipes. Inclined (tires are fastened together with chains so that the tires do not collect at the bottom) and vertical.

Mulch from wood chips here is a very bad choice, sand, of course, is much better

Essentially it's fun arithmetic, but with the appropriate tire size it's a great tunnel for little ones

And here, in an excellent creative sports device for training your arms, there are tires - a springy platform-buffer for landing and pushing off with your feet.

Continuation - ideas for balance training complexes, large game objects and much more - see the second part of the article.

Source among others:
www.playgroundideas.org

Hello, dear readers! Even from the simplest materials at hand, if desired, you can create incredibly attractive things. In today's review we will talk about old, unused car tires, or rather, we will tell you what to make from tires. There are actually many variations in the use of such tires, they can be swings, armchairs, ottomans, garden decorations, flower beds, fences, and much more, details below.

What can be made from tires.

1. Curb.

A classic of the genre, traditionally old tires are used to separate the area from the path to the flowerbed or lawn. Cut the tire in half and bury the cut part in the ground. Such borders can be painted in any shade if desired, or by developing creativity– draw flowers, cars, etc.

2. Newspaper box.

Cutting the tire in half and installing it on metal legs you can get a rather interesting newspaper or magazine holder (whichever is closer to you).

3. Fence.

Great idea for the fence - tires laid on top of each other, sprinkled with earth and planted with climbing plants.

4. Swing.

Children will be indescribably delighted with such a wonderful swing. A horse made from a tire looks especially impressive (see photo below).

5. Rocking chair.

By cutting the tire in half and nailing a flat piece of wood to the cut piece, you can end up with an excellent outdoor rocking chair for a child. But you can also paint it in your child’s favorite shade, and then he will spend a lot of time on it.

6. Flowerbed.

The next way to use tires, just like the border is considered a “classic”, you will agree that flower beds made from old tires catch your eye everywhere - in small towns, residential areas, villages, kindergartens, playgrounds, etc. Below you can study various options flower beds.

7. Bird feeder.

A wheel on a rope tied to a tree branch filled with food will serve as an excellent bird feeder.

8. Armchair.

But you can make a magnificent chair from tires; various variations of chairs can be studied in the photographs below.

9. Chandelier.

The imagination of designers is truly limitless - you can even make a ceiling chandelier.

10. Bicycle rack.

Tires cut in half and placed in a row about 8cm apart make an excellent bike rack.

11. Place for a dog.

A round pillow placed inside the tire will serve as an ideal sleeping place for your pet - cat or dog.

12. Garbage can.

The simplest idea to implement is three or four tires stacked on top of each other, a large garbage bag inside, and in the end an excellent garbage can. Painted wheels will look more interesting and neat.

13. Wall flower bed.

Tires screwed with a screwdriver to wooden wall will serve as excellent wall flower beds.

14. Palm tree.

First you need to flatten the tire by cutting it with a jigsaw, then using a pencil draw the outlines of palm leaves, which are again cut out using a jigsaw and painted in green color. The resulting leaves are nailed to the trunks of trees that have outlived their useful life.

15. Sandbox.

The simplest idea to implement is creating a sandbox. Fill a large tire with sand to the top and place a beach umbrella in the center. At night, remove the umbrella and cover the sandbox with an awning, and so that it does not fly away when the wind blows, screw screws into the edges of the tire, and create loops on the awning itself.

16. Hanging flowerbed.

Look how chic the hanging flowerbed in the shape of a parrot looks. The tire is cut with a jigsaw and painted according to the preliminary marks. facade paint.

17. Umbrella stand.

Holes are cut in the tire the width of the folded umbrella; you can try taking large curtain eyelets and securing them to the tire. To prevent the tire from rolling around the room, attach it to wooden legs.

18. Pond.

A great idea for creating a garden pond. A hole is dug to the size of the tire, the latter is covered with a thick film, and a hose with water is lowered inside. The edges of the tire are masked with all sorts of flat stones, and moisture-loving plants are planted. Finally, the pond is filled with water. The entire process of creating such a pond can be studied in the photo below.

19. Ottoman.

A tire ottoman decorated with rope looks very stylish. Plywood the size of the tire itself is nailed to the surface of the tire, then a rope is taken and glued to the sides and top of the future ottoman using glue. The entire process of creating an ottoman is presented in the photo below.

20. Washbasin.

How do you like this washbasin? It’s very original, isn’t it?

21. Garden steps.

Sometimes the site is not on flat surface, but goes downhill, so in order not to bother with concreting, you can use unnecessary tires, burying them along a steep slope, forming steps.

22. Table.

The miniature table turns out to be very beautiful. You can find out how to make it yourself by studying the photo below.

23. Decorations for flower beds.

Craftsmen make really chic garden decorations from old tires, including: swans, ladybugs, cows, frogs, tea mugs, etc.

How to make a fountain from a tire:

How to make a swan from a tire:

How to make an ottoman from a tire:

Today we showed you a lot of ideas on what can be made from tires. For the garden, it is difficult to find a more practical and pliable material, but what magnificent garden elements are obtained - a sight for sore eyes! The conclusion is simple: if you have a summer cottage, you shouldn’t throw away worn-out tires!

Friends, we remind you that on our website “” you can subscribe to receive notifications about the release latest reviews, the subscription form is located in the sidebar.

Used car tires are becoming a headache for environmentalists and advocates environment. More than 70% of rubber tires in the world are not recycled and end up in landfills. Meanwhile, the versatility and free nature of this material allows you to use old tires for new purposes. Masters with developed imagination They create with their own hands both individual sculptures from tires on the playground and entire towns.

Construction and arrangement of a children's playground from car tires

You will rarely meet a motorist whose garage does not have several tires that he simply did not get around to throwing away. Don't rush to do this. Crafts made from them are so simple and multifunctional that they will find a place on the site, in the design of the yard, and in summer cottage, and even as furniture.

A playground for children, equipped with tires, is a fairly common phenomenon. This material is almost universal for decorating sites with your own hands; sometimes you come across real masterpieces. What crafts are the most popular among children? First of all this. It's easy to make your favorite place to play from one or more tires.

Tires are exactly the material that does not require a large number of components, tools and additional parts for strengthening.

Sandbox from one tire

All you need for this craft is a large tire, a sharp knife, a piece of an old garden hose, a shovel, and paints in as many bright colors as possible.

• It is better to choose a place for a future sandbox made of tires in the shade: rubber gets very hot in the sun, children can get burned, and in the heat it is more useful to play in the shade;
• First, you need to dig a hole with a shovel, a little larger than a tire;
• Use a knife to trim the inner ball and trim it with a cut rubber hose. This finishing is needed to protect children from cuts;
• Cover the tire with sand;
• Paint in bright colors;
• After the paint has dried, the sandbox you created with your own hands will become a favorite place for children to play.

Sandbox Flower

Creating such a sandbox will take a little more time, but it will work bigger size, several guys can play in it at the same time.

Craft kit: 3-4 small tires, knife, construction stapler, shovel, paints, hose.

• The tires are cut in half lengthwise and trimmed with a hose;
• All elements are laid in the form of a flower in a shallow figured trench prepared in advance. Alternatively, in the place of one petal you can install a round seat or a stump; this will be a table or chair for parents;
• At the junction points, the parts of the tires are fastened together using a stapler;
• All that remains is to paint this seven-colored flower and fill it with sand.

Sandbox with waves

This sandbox option can be of any size, for a whole group of children. Several tires are needed for production, depending on the diameter.

Swing

What playground would be complete without swings? Venues equipped with various crafts made from tires will be no exception, especially since there are many options.

The most important thing in installing a swing with your own hands is to make reliable fasteners.

The suspension location and ropes must be as strong as possible. As for varieties, the choice is yours.

The simplest

For older children: the tire is suspended vertically on a rope or horizontally on two ropes. This option is made more attractive by cutting out all kinds of designs and figures from the tire. The main thing in this lesson is to leave the supporting areas of the tire as reliable as possible.

Cradle

This is a swing for small child. The creation process is like this:

• A small tire needs to be trimmed sharp knife up to half so that the rims remain intact;
• Prepare the attachment points, secure the staples and pass the rope through them;
• Tie the ends of the rope on the rims on both sides.

The cradle - swing for the baby is ready.

Rocking chair

Easy to do with your own hands and no less interesting for children - crafts in the form of rocking swings. Items needed: a tire, a board and something that can be used to make handles, for example, a simple thick rope will do.

• The tire is cut in half (you can get two swings);
• A board is attached to the cut part;
• Holes are made in the board, and a rope is secured as handles. Handles can be carved from wood;
• This is the simplest version of the rocking chair. If you use your imagination and put in a little more effort, the seat board can be decorated with a variety of animal figures, the tire itself can be cut out figuratively, and painted brighter.