A small fountain with your own hands. DIY fountain at home. How to create a decorative indoor fountain with your own hands: step-by-step instructions

Now many people have a desire to have (especially in summer) a small fountain that would make the atmosphere more exotic. But many are sure that this idea is beyond their means. You can try to make this dream come true at home. A homemade one can be made in a few hours, even if you have never created such things.

Such products are divided into indoor (decorative) and courtyard ones, installed in summer cottages or in the courtyards of multi-story buildings (if they do not interfere with garages, etc.). There are many various designs home fountains. Let's consider how it is possible to make at least a small one with your own hands indoor fountain chick. First, let's think about it future design according to the following parameters:

Desired sizes.
Form.
The number of cascades of your fountain.
Correct design of the closed water system of the product, otherwise the fountain will not work normally.

Now you have passed the first stage, and you have a drawing of your fountain on paper. Now comes the next stage: you need to prepare materials and parts for assembling your idea. Here is a rough list:

Small. If you are planning to do desktop version, then you can use an aquarium pump.
Hermetically sealed container made of metal or plastic. For these purposes, you can adapt any utensils available in the house (vase, plastic bucket, basin).
For decorative design you can use pellets, shells, decorative colored glass, etc.
Electrical cords, sockets for connecting the pump.

Making your own fountain at home

Assembly begins by installing the pump on the lower part (bottom) of the container you choose. To do this, you can use synthetic adhesives or suction cups (if you are using an aquarium pump, they are included in the kit). The water is raised to the upper level using a tube (plastic, silicone). We put it on the outlet of the pump and secure it strictly vertically. Next, to mask the pump and isolate it from external environment it is necessary to cover the equipment with a homemade or purchased frame of suitable size. If you are planning to make it yourself, then do not forget to prepare the necessary materials and tools for this.

If you have a plastic box with dimensions suitable for the pump, then cut out ventilation holes in it and use it as a casing. As a last resort, you can put the pump under a layer of colored pebbles. Next, you need to turn on your imagination, since the final result depends on it. We take any container we like (a beautiful mug, a large sink, a plate, etc.)

It should be installed at some elevation.

This can be achieved by creating a slide of stones with your own hands, on which epoxy glue We install our decorative tank, into which a tube is inserted from the outlet end of the pump.

If there are no stones, then you can make cubes from polystyrene foam or use ready-made plastic ones. To do this, we drill a hole in the vessel we have chosen along the diameter of the tube that goes into the tank (into its internal cavity), 6-12 mm. We do it ourselves by sealing the hole and fixing all the elements using waterproof glue and sealants.

Even the smallest body of water can decorate your own summer cottage and give it some zest. And a fountain made with your own hands will not only become a favorite place to relax and provide aesthetic pleasure, but will also become a reason for compliments from invited guests.

But not everyone decides to build this mysterious hydraulic device. Some summer residents mistakenly believe that building a fountain is a labor-intensive and expensive process and cannot be done without the help of specialists. But every lover of spending time in nature can give themselves such pleasure; the main thing is to know all the nuances of constructing a fountain with your own hands.

SELECTION OF FOUNTAIN TYPE

There are two types of fountains based on the type of design.

The open version involves supplying water to the nozzle. The formation of a jet in this version of the device occurs due to changes in water level. In this case, the water pressure is weak, so it is necessary to constantly monitor the water level. In addition, the water in such a fountain becomes polluted quite quickly. To create it, you need to install a small reservoir at a height of about one meter above the nozzle.
A fountain with a pump is the most practical and effective option. By placing the pump at the bottom, continuous circulation of water is ensured. Here the pressure is stronger and the visual effect is more beautiful.

By design, pumps that act as fountains are divided into submersible and surface (stationary).

OPTIMAL PLACE TO PLACE A FOUNTAIN

Picking up comfortable spot For the construction of a fountain, it is recommended to take into account the degree of slope of the ground. If the area is uneven, it is better to place such decoration in a low area. This option for the location of the reservoir will not only allow you to adjust the volumes groundwater, but will increase the oxygen saturation of the air.

too close to the house so that moisture does not fall on the walls in windy weather;
in open areas, in order to prevent water from blooming due to sunlight entering the reservoir;
near trees so that leaves, seeds, fluff falling from them do not clog it, and roots do not damage the waterproofing.

The fountain must be positioned in such a way that it is not an obstacle to other buildings and is visible from all points. It is recommended to place the structure near the resting place.

The minimum distance that must be maintained between the fountain and plants, buildings, and furniture is 50 cm. This way, the plants will not die from excess moisture, and the furniture will not become unusable. Perfect option for the location of the fountain - partial shade and a place protected from the wind, located close to a source of water and electricity. This arrangement will save you from unnecessary wires and additional work by isolating them.

Having decided on the location, it’s time to think about the shape and depth of the future fountain.

PREPARATION OF MATERIALS FOR CONSTRUCTION

To build a fountain in order to save money and effort, you can use construction technology decorative pond with its pump equipment.

Materials required to build a fountain:

fountain container;
pumping station;
durable film;
bayonet shovel;
natural stones of various sizes;
sand, gravel;
decorative elements.

SELECTION AND INSTALLATION OF CONTAINER

If you plan to build a miniature fountain, you can use an ordinary plastic basin or any other container as a reservoir. big size.

For large bodies of water, old bathtubs or a self-dug pit are suitable. If a bathtub is used, it is necessary to dig a hole of such a size that its edges are not higher than the surface of the ground. All holes in the bathtub are securely sealed, after which it is lowered into the pit and strengthened with earth, stones and sand.

For a homemade tank, make a hole of the required depth and cover it with a thick, high-quality film, which is secured along the edges on the surface with stones. Stones are also poured at the bottom various forms and sizes. It is important that the stones do not have sharp edges and cannot cut the film. The stones are evenly distributed along the entire bottom of the future fountain.

SELECTION OF A PUMP FOR CONSTRUCTION OF A FOUNTAIN

In order to construct a fountain on your site yourself, it is not necessary to purchase expensive materials; you can adapt any old elements. However, you should not spare money - the pump, the better quality it is, the more beautiful the fountain will be and the longer it will decorate the area without causing problems.

Submersible pump - best option for the construction of a fountain on a summer cottage. It works on the principle of a centrifuge. You can also install surface pump, it is mounted on the edge of a pond, but is most often used on large fountains and cascading ponds.

When choosing a pump, you should take into account the pressure that is constantly present in the pipe and the differences in this pressure. Therefore, purchasing the most powerful pump may not be justified, since not in all cases it will be able to work out its full power.

Regardless of which type of pump is chosen, it is important to remember that its power must be related to the diameter of the pipe. The fountain jet should come out under powerful pressure, and not slowly flow out of the pipe, since there will be no effect from such a design.

HOW TO MAKE A FOUNTAIN WITH YOUR OWN HANDS: STEP-BY-STEP INSTRUCTIONS

The construction of a fountain includes several main stages:

pit preparation;
securing the trench;
installing a container or covering the bottom and edges with film;
installation of pumping equipment;
fountain decoration.

FOUNTAIN WITH A POND FROM AN OLD TIRE

To build such a fountain you will need:

an old tire from a truck or tractor;
cement mixture, water, crushed stone and sand;
a container for mixing cement and a shovel;
sealant;
building level;
mastic;
stones;
pump.

Stages of work:

VIDEO - FOUNTAIN FROM A TIRE WITH YOUR HANDS

FOUNTAIN FOR A GATE USING FILM

For such a fountain you will need to prepare:

thick film;
shovel;
sand;
pump;
stones different sizes no sharp corners.

Stages of work:

we dig a hole, clear it of stones and compact the bottom;

NEW LIFE FOR AN OLD BATH

For this version of a country fountain you need to prepare:

shovel;
pebbles;
pump equipment;
bath;
insulating tape;
metal scissors;
non-ferrous iron sheet;
drill.

Stages of fountain construction:

we dig a pit corresponding to the size of the existing container;
place the bath inside and plug all the holes;

We cut out wide strips of iron and lay them around the bathtub, covering it with stones;

MINI FOUNTAIN FROM PLASTIC BOTTLE

For this sprinkler you will need:

plastic bottle;
metal, strong wire or nail;
insulating tape;
garden hose.

Materials for a decorative fountain

Construction stages:

decorate the pot with paints;
make a small hole in the bottom of the pot;
install a pump under the pan;
we drag the pump tube through the hole made in the pot;
fill the bottom with pebbles;
decorate artificial plants and figurines;
fill the pot with water.

VIDEO - DECORATIVE FOUNTAIN WITH YOUR HANDS

FOUNTAIN DECORATION

You can emphasize the uniqueness of a hand-made fountain by decorating it. It is recommended to lay out beautiful, colorful stones of different sizes around the pond, put flowers in pots, place cute figurines of animals, birds, etc.

To make the fountain amaze with its beauty and unusualness at night, you can backlight it using special equipment. Lamps installed around the perimeter of the fountain and lighting at its bottom will create a fabulous, magical atmosphere.

The bottom of the reservoir can be landscaped with the help of special plants, and bushes can be planted around the fountain.

Any country pond and fountain, including one, needs careful care. To maintain order and clarity of water and a pleasant spring appearance of the structure, it is necessary to regularly clean the tank. Using special devices, it is necessary to remove leaves, seeds, fluff and other objects from the surface of the water that can not only spoil the appearance of the reservoir, but also cause the fountain to malfunction.

At the end of the summer season, it is necessary to drain all the water, transfer the removable parts of the structure to closed room, and cover the remaining parts and the bowl with film to prevent dirt from getting into them.

Building a fountain with your own hands in a country house or even in an apartment will not be difficult and will not require large financial resources. Before building a decorative fountain, you need to decide on the shape, size and installation location. There are many options for the location of such structures - near the gazebo, on the lawn, in the garden. After constructing a fountain, you need to carefully monitor the cleanliness of the water, regularly remove debris and add water, as it will evaporate.

Such designs are widely used in the design of suburban areas. Fountains can decorate any ownerless area or become a highlight summer cottage. And by adding imagination and decorative elements, you can make it even more beautiful and unusual.

contemplator

Landscape design

For any owner, the appearance of a summer cottage or yard has great importance. Its design can be done by specialists, but, if desired, you can do it yourself. A fountain will be a successful decoration for a yard or area. It can also be built according to your own design.

Types of fountains

There are fountains for dachas different types. They are divided into types: by design, by appearance, by operating features, etc. According to the method of construction, country fountains are divided into circulation and flow, they are also called “Roman”.

Did you know? The first fountains appeared in Ancient Greece and in Ancient Rome.

Circulating suggest the water cycle. Water fills a certain reservoir (bowl, vase, reservoir) and is supplied with the help of a pump to a device from which a stream of water directly shoots out.

Everything is arranged in such a way that the outgoing water enters the reservoir and is pumped upward again. Thus, the device does not require water supply from a water supply system or a well. The only thing that is necessary is to add water to a certain mark, since it tends to evaporate or splash.

Flow fountains are arranged using water supply (well) and sewerage. Water flows upward, falls down and goes into the sewer. The method is, of course, irrational, but Such fountains have a number of advantages:

aesthetic appearance;
drinking water;
the possibility of using water for watering lawns, flower beds, shrubs and trees.

Based on their appearance and features, fountains can also be classified into single-level and multi-level, single and group, jet, waterfall, cascade, in the form of a ring or tulip, dancing, singing, colored, with a pond, with a reservoir, etc.

Did you know? Tallest fountain in the world- 312 m. It's called a fountain« Fahda» , is located in Saudi Arabia.

Choosing a suitable location

If you decide to build a fountain on the site with your own hands, then, first of all, choose a suitable place for this.

If there is a pond or a pond in the country, the choice of location is obvious. Where the pond is located, there will be a fountain.

The structure of the pond, of course, will have to be modified and adjusted, but the foundation will remain.

If you are starting from scratch, then you need to choose a place, carefully weighing all the pros and cons. DIY garden fountains perform different functions: they humidify the air in the garden, which is good for trees, create cool conditions, can be used for irrigation, etc.

For this reason, you need to choose a place so that the fountain not only brings aesthetic pleasure, but is also useful. A suitable place for arrangement would be an open area between trees, bushes or hedges. Trees and bushes should not hang over a pond or reservoir to prevent debris from falling into the water and leaves falling. This is harmful to water filters. Also, due to the proximity of trees, and therefore their root system, the underground part of the fountain may be disrupted or even destroyed. If your dacha has plants that cannot tolerate waterlogging, arrange the fountain away from them.

Important! Do not place the fountain near buildings. There is no need to set up the structure in the open sun, as this can lead to water blooms. There is one more condition: a fountain in the country, made with your own hands, must be in harmony with

overall design

. Everything should be done in the same style. This should be an area that is clearly visible from the windows of the house and from any part of the yard, because you are building a fountain, first of all, for aesthetic pleasure.

Preparation of materials for construction When a place for a fountain and its type have been chosen, a project has been developed, you need to determine what materials will be needed for construction. Let’s assume that the project is designed for a circulating jet static fountain with a single release of water, i.e., the “Geyser” type. At home, to set up a fountain with your own hands, you will need cement, sand, crushed stone, durable polyethylene film and a construction façade mesh the size of the diameter of the structure (both the film and the mesh must be the same size). In addition, you need

plastic container volume of about 50-70 liters, depending on the size of the structure. If you plan to decorate everything with stones, then prepare them right away. It could be wild stone the right size, cobblestones, granite, large pebbles, etc. To ensure

Pump selection criteria

Depending on the type of fountain you need to choose a pump. For a “waterfall” we would choose a surface pump, and since we have a traditional fountain, we choose a submersible one.

As a rule, submersible pumps perform their function perfectly. They are compact, quiet, easy to install and, importantly, affordable. Submersible pumps come in different capacities. It is calculated in the amount of water pumped per 1 hour (l/h).

The height of the jet will depend on the power of the pump. Max Height calculated based on the diameter of the “foot” you made. In this case, the pump does not need to be selected according to the principle “the more powerful, the better.” For the arrangement, we need one so that the jet is high enough and so that the spray does not fly beyond the “foot.” For a summer residence, the jet height is suitable from 80 cm to 1 m.

For this reason, you need to choose a place so that the fountain not only brings aesthetic pleasure, but is also useful. A suitable place for arrangement would be an open area between trees, bushes or hedges. It is necessary to ensure that water does not splash outside the fountain. Excessive humidity can lead to the death of plants and damage to things.

Manufacturers, as a rule, provide in the instructions a table of the relationship between power and jet height. Since we are equipping the Geyser, such a device will require a pump with a capacity of about 7000 l/h.

Installation principle of the pumping system

Pumping system installed 10 cm above the bottom on a stand (laid brick or mounting cabinet). A hose or pipe with water supply is connected to it. Usually the sprinkler comes complete with a pump, but if you don’t have one, you can make it yourself.

To do this, you can take a regular stainless steel pipe. The diameter will depend on the height of the jet and the diameter of the water spray. For small fountain at 0.8-1.0 m a diameter of 2-2.5 inches will be sufficient. The length will depend on how deep the pump is immersed. It is enough to leave 10-15 cm above the water.

To give the stream a shape, you can flatten the pipe, roll it, leaving a hole, drill several holes, or cut a thread and screw on the desired nozzle. Connect to the pump directly or via an adapter (if necessary).

Installation of a fountain. Step-by-step instruction

Master class on installing a fountain in a country house with your own hands step by step photos easy to find on the Internet. Typically, installation takes place in several stages. Arrangement of the selected project includes 10 steps:

Video: making a mini stream yourself
Video: pond, stream for home
Principle of operation

Video: small option made of stone yourself

Design Features
Assembly of the structure

Video: interesting option from a tire

The fashion for fountains for apartments and houses appeared in our country quite a long time ago and is currently experiencing its rebirth. Like decorative technique interior design living rooms and today it is considered original solution to revitalize it and give it some freshness internal space premises.

How to make a fountain with your own hands? If there is sufficient space, it is possible to build home fountain or a small lake with water lilies - it’s all a matter of your imagination and taste.

A home fountain may be a good way to decorate little-used corners of your apartment (loggias with plants, for example). If the area is small, then you can make a mini waterfall.

Return to content

Video: making a mini stream yourself

Before you start building a waterfall, you should study a number of examples in photos and videos on the Internet, where indoor fountains are presented in all their diversity. Having decided on the size (mini or larger version), appearance, design (waterfall, stream, etc.), you can begin to create a fountain with your own hands.

Return to content

Video: pond, stream, for home

Return to content

Principle of operation

An indoor fountain is very simple and consists of organizing the circulation of a water mass in a closed cycle, which is carried out using a compact electric pump. In this case, the water rises to a collection point located at some elevation, from where it flows or falls like a small waterfall into a special storage tank.

Return to content

Video: a small version made of stone yourself

Choice suitable shape and the design according to which the home fountain will be created will depend, of course, on the features of the interior of your apartment. At the same time, you can always complement the waterfall with well-designed lighting and unobtrusive sound so that it turns into decorative element your dreams. Home fountains should relax the owners and decorate the room, delighting the guests. Suitable options you can look in the photo.

Return to content

Design Features

The simplest indoor fountain with your own hands can be made from the following minimum required set components:

the base on which indoor fountains are mounted (receiving tank);
standard silicone hose;
mini pump from an aquarium or another pump option;
a container used as a source (or several to make a waterfall, as in the photo at the beginning of the article).

In addition, to design the composition and finish you will need decorative primer, expanded clay and other auxiliary materials. Home fountains should look interesting to decorate your interior. Examples can be seen in the photo.

As a source, you can use a large sea shell or an elegant mini jug in which you drill an inconspicuous hole. It will be needed to install a piece of silicone hose into the “source”, through which water will be supplied to this container using a pump or pump. You can use a regular flower pot as a base (receiving container).

Return to content

Assembly of the structure

We begin assembling a home fountain with our own hands by attaching a piece of silicone hose to the tip of the pump and placing the latter at the bottom of the receiving container. We also put expanded clay here and cover it all tightly. plastic film(preferably black), in which we cut a hole and pass a piece of hose from the pump through it.

Return to content

The film will prevent the expanded clay from floating up when the container is filled with water. Place a layer of color on top of the film decorative soil. Your DIY indoor fountain is almost ready.

A stand for the source can be built from stones glued together with waterproof glue, first passing the hose from the pump through it. After this, all you have to do is thread the hose into the hole previously drilled in the source and trim off its excess. Your waterfall, stream, pond is ready!

Similar materials

Every owner of a suburban area strives to make his home and the space around it as comfortable as possible and at the same time beautiful. After all, a well-designed landscape design is not only a decoration of a summer cottage, but also harmonious combination different zones in one area. How good it is after working day dine in the gazebo with your family or, in the hot summer, relax on a bench, enjoying the coolness of the fountain. This is exactly what we will talk about in our article, and more specifically, how to make a fountain with your own hands.

Advantages

Most would agree with the statement of psychologists that the sound of water has a calming effect on the nervous system. A person watching the flow of water internally relaxes and finds emotional balance. You can sit by the fountain for hours, watch its play and splashes, and think about your own thoughts.

There is nothing complicated in the design, so almost anyone can install a fountain in their dacha with their own hands - you just need to have the desire and the necessary materials. We will also consider the latter in our article.

The incomparable advantage of the fountain is that it can be an excellent addition to the landscape design of any suburban area. Besides, homemade fountain with the right lighting it will become your guests’ favorite place to relax.

Depending on your preferences and general style landscape design The design of the fountain is also selected, just take into account the size: if the area is small, then it is better for you to install a small garden fountain with your own hands.

How it works?

The device uses the principle of circular water supply. In other words, initially a certain amount of water is poured into the reservoir (bowl), which, using a pump, then circulates throughout the entire structure. There is a nozzle above the surface of the bowl, to which water is supplied. To prevent the bowl from overflowing, a special device is installed in it to regulate the amount of water.

This is a generalized diagram that describes the simplicity of the design. Therefore, having installed a fountain in your dacha, you don’t need to think about the fact that water consumption in the area will increase. Just fill it once required volume water and from time to time just check the degree of contamination. Even though the pump has a filter, the water should still not be too dirty.

Choosing a place

Of course, before installing a fountain with your own hands, it is necessary to at least visually determine the most appropriate place for him. Better yet, draw a plan in order to have a specific idea of the location of the structure and take into account all the nuances in advance. We offer you several practical advice by choice of location:

The structure should be visible from anywhere on your site and not block the paths.
If there is a gazebo or summer cuisine, then a cozy do-it-yourself fountain will be an ideal addition to such a recreation area. If you have a playground, you can make a mini fountain nearby with your own hands - children will be happy to splash in it in the summer.
Study the topography of your site and find a low-lying place - it is best suited for installing a fountain on the site with your own hands - in warm time year it will be cool and comfortable here.
The presence of trees nearby is not the most in the best possible way will affect the operation of your fountain - roots can damage part of the structure underground, and falling leaves can clog the water. At the same time, too open a space in direct sunlight can cause water to “bloom.”
It is best to install the structure away from the house, since gusts of wind can blow the stream of water to the side, causing the walls to be constantly wet.

Varieties

Surely many have noticed that the fountains differ in appearance not only in design, but also in design. Some are made in the form of reservoirs with nozzles, others are on a stand in the shape of jugs, statues and other devices from which water flows.

Accordingly, fountains come in two types:

submersible;
stationary.

The first option has simple design and is often found on suburban areas and even in houses. To make a similar home fountain with your own hands, you will need a bowl, plastic pipe, pump and nozzle.

Stationary have more complex design and pompous appearance. Such devices can often be found in city parks and squares. For this option, you already need to lay the foundation, since the body is made mainly of stone or marble - durable materials resistant to aggressive weather conditions.

For a large area of ten to twenty square meters A large stationary fountain is suitable, but for a small area it is best to install a submersible one. Well, the style of landscape design also dictates its own rules: for Japanese garden, for example, will do submersible type.

Construction design

As we noted earlier, design style also plays a role important role. After all, all elements of landscape design should complement each other and be in harmony with each other. The most common option is the classic submersible jet fountain. Its construction does not require large financial and physical costs, and it will look advantageous in any design. Especially if you want to complement an artificial pond with it. If you want to see options for what do-it-yourself fountains for a garden might look like, we presented a photo of the idea at the end of the article.

The shape of the bowl is most often symmetrical - it is either a circle or a square. You can put it around the edges decorative rock or pebbles, add greenery. Only the plants must be moisture-loving, otherwise the appearance of the composition will be hopelessly spoiled by rotting plants.

Necessary materials

Before you make a decorative fountain with your own hands, you should take care of the materials and tools for construction in advance. If you want to make a stone fountain, then you will need following materials:

smooth round and flat stones of different sizes;
gravel or crushed stone for drainage;
water bowl;
water pump;
copper tube;
coupling;
small diameter plastic pipe;
silicone;
boards to strengthen the structure.

In accordance with the above materials, you will need the following tools:

hammer;
jigsaw or small saw;
scissors;
fum tape;
drill;
sliding key.

Depending on the desired decoration method, you may need Additional materials and tools. Here you can get your bearings on the situation or make a list of necessary items for work in advance, so as not to be distracted during the process.

Pump installation

Undoubtedly, the main and important detail The whole structure is a pump. If you are a beginner and don’t yet know how to build a fountain at your dacha with your own hands, listen to our advice: you need to approach the choice of pump thoroughly. First, consider the volume of the bowl - the larger it is, the more powerful the pump will be required. The presence of a filter will protect it from various debris and extend its service life.

There are two types:

surface;
submersible

The first type is installed on the surface, but in no case above the water level. The principle of communicating vessels works here.

It is advisable to install the submersible pump not at the very bottom of the bowl, but at some elevation - then sediment will not fall into the filter. Keep in mind that the pump will consume electricity, so make the necessary communications in advance and provide a shield for safety.

Even if it is not possible to install electric pump, don’t be upset - next we’ll tell you how to make a fountain in your dacha without one.

Design without pump

Out of stock submersible pump, you can make an open fountain. If you have a well with a pump on your site, you can remove this water through a pipe into a fountain. The only thing you will need to decide is where the water will flow - for example, you can simultaneously turn on the fountain and water nearby plants.

Thus, you can create mini garden fountains with your own hands at several points on your site.

Exterior design

Of course, you shouldn’t forget about the end result of your work. Appearance finished design should please the eye, and the lighting will allow you to enjoy the beauty of the fountain in the evening. We offer you some decorating tips:

You can use a variety of nozzles: the shape of the jet will depend on their shape. It can be in the form of a dome, an umbrella, or even a geyser.
Properly selected lighting will add zest and mystery to the pond. Light sources can be installed not only around the perimeter of the fountain, but also under water. And it is not at all necessary to use standard options - the multi-colored glow of water will definitely fascinate any viewer.
Use flowers and shrubs to decorate the pond - they will create the impression of a truly “paradise” corner.

We invite you to see how beautifully decorated garden fountains are with your own hands, photos of which are below.

Ideas and important little things

There are many photos on the Internet country fountains, methods of their construction are described. You can also find enough information on how to make a home fountain with your own hands. Yes, yes, such mini-devices look very original and complement the interior. Such designs are especially popular among supporters of Feng Shui. Of course, the process of their construction is much simpler and cheaper - and their dimensions are quite small.

If you still have a desire, but don’t know how to make a fountain at home, we will help you make a choice and give you a few useful tips:

If there is no space on the site, a fountain can be made even at home - in the hallway, for example, or in the greenhouse. Its dimensions can be completely different - depending on your desires and the available space.
A submersible fountain can be made from available materials - the bowl can be an old cast-iron bathtub or a bathtub cut lengthwise car tire, large flower pot, wide basin.
The stationary version can be made in the form of a jug, bottles, stones, in the middle of which there is a water hose - this is also great option For homemade design.
The fountain does not have to be installed separately - it can be part of a wall or landscape composition.
The cascade fountain is a stationary type and has an undeniable advantage– such a structure can become the fruit of even the wildest imagination. The matter may be limited not only to traditional pots from which water flows and overflows, but also to entire structures in the form of garden carts, teapots, samovars, watering cans with buckets, etc.
Fountain elements can be painted in various colors, often used special compounds for treatment to prevent the appearance of moss and mold.

And, of course, you shouldn’t forget about maintenance - with the onset of cold weather, you need to turn off the fountain, drain the water from it and cover the entire structure with film until it warms up. In this case, your little country oasis will delight all household members and guests with its joyful murmur for many years to come.