We make a floor vase with our own hands. Tips for making a floor vase with your own hands. Original tied bottles
The interior of the house should always reflect the tastes of the owner, but finding things of the appropriate type in stores is quite difficult. But there is an option to make them yourself; this will require you to spend a little time and effort, but you can really make unique interior decorations, such as floor vases. It’s not difficult to make floor vases with your own hands; for this you can use the most various materials, But wooden crafts will look best in classic interior, since it is a natural material.
The easiest way to make a vase with your own hands is to use wooden boards and make a straight classic version. From the material you will need only four planks of the same size, and one square, which will serve as the base.
For assembly, you can use simple self-tapping screws, but only if you want to further decorate the base later. If you just want to tint and varnish the vase to preserve the natural look of the wood, then you can use wooden dowels. They will help hold the vase together, and at the same time appearance will not be damaged by self-tapping screws.
For fastening boards small design that will not be loaded, use regular wood glue.
There are a lot of options for decorating such a product - from gluing additional elements before carving. You can cut the corners with a router, make shaped holes in the board, paint it in a wide variety of colors, and play a little with the sizes of individual boards. Make wooden vases with your own hands that will perfectly suit your interior and are guaranteed to have no analogues. Even pistachio shells, nuts, tree bark and other waste are often used by designers when decorating vases.
Vases with complex shapes
Make a flowerpot with complex shapes It will be a little heavier, since bending wood at home is almost impossible. But along with wood, you can also use other strong and durable materials that are more flexible, such as plywood.
A shaped plywood vase is not difficult to make, but you really have to spend a little time to make it. The most important thing is not to rush and do everything carefully, then the result will definitely not disappoint you, and the vase will not only be beautiful, but also durable.
First, you need to cut two figured edges from the boards - this will be the base. To make them the same, it is best to use cardboard patterns and, after the markings have been made, cut them with a jigsaw. Classic option is a shape with a thickening in the middle, similar to a flask kerosene lamp. This shape will look beautiful and, in addition, it is easy to work with when assembling the vase frame.
Plywood will be used for the other two edges. It is better to take plywood with a thickness of 6 mm, it is quite strong and at the same time flexible. Two rectangular pieces are cut out, the width of which is equal to the width of the vase, but the length should be greater than that of the figured blanks, since these edges will bend and lose a little in size.
When the plywood is moistened, it is attached to the shaped sidewalls using self-tapping screws.
You need to work slowly and gradually tighten the screws from the bottom to the top so that the plywood is pressed well and does not bulge. It is enough to tighten the screws at a distance of 3-4 centimeters so that the plywood bends well.
After you assemble the frame, you just need to align the top ends of the plywood so that all the edges of the vase are on the same plane. Also, the vase needs to be placed in a dry place for a day so that the plywood can dry. After drying, the shape you gave it will become natural to it.
The frame made in this way is very strong and durable. Its only drawback is that it needs to be additionally decorated, since outer surface The screws you used to attach the plywood will be visible. But decoration floor vase will help you make it even more beautiful and unique.
To give the vase more stability, you can additionally screw it with screws from the bottom. wooden stand. But since the vase is made of wood, and the wood is not very lightweight material, then the stability of the vase will still be good.
Other types of floor wooden vases
It’s easy to decorate your home with an original floor vase, even without a special carpentry tools You can make very interesting and unique options yourself. All you need is a little imagination and desire. After all, wood is a unique and beautiful element, and even two products made in the same way can look different.
Even a simple piece of log can, if desired, turn into a beautiful original vase. It is enough to simply hollow out its core and peel it from the bark. An old log, rotten in the middle, which is not even suitable for a firebox, can become a unique design decoration.
And this is just one of many examples. And if you add this to the tree flexible material like plywood, the number of options increases many times.
In addition, you can glue floor flowerpots from small bars; this, of course, is a long and painstaking job. But the result itself will not disappoint you, since such elements are not only very beautiful, but also have a variety of shapes, since wooden block you can cut as you wish. In addition, you can use bars different sizes combining them into unique compositions.
A floor vase made of wood is a completely feasible task for anyone who wants to make it. It doesn't matter if you have special tools or not. Materials can be purchased or used from carpentry waste. The most important thing is desire. Well, in addition, try to make an element that will decorate your interior and fit well with it. This is easy to achieve as you can decorate it according to your design.
For many centuries, floor vases have been great decoration Houses. During ancient civilizations, large vases already existed. They were used not only for flowers, but also for storing bulk substances. Now there is no problem in choosing beautiful floor vases. But it is better if this piece of furniture is made by the caring hands of the owners of the house. In addition, this will help save the family budget.
History of floor vases
IN Ancient Greece vases were used to store various liquids and bulk substances. A tall floor vase was a mandatory item in the Middle Ages in the homes of aristocrats. She symbolized wealth and well-being. Not much has changed since then. Now this item can be seen in hotels and country houses, and in beauty salons. They always look stylish and create a sophisticated atmosphere in the room.
Ideally, a tall floor vase should be between 40 cm and 1.5 meters in size. But there are also very tall specimens - up to the ceiling.
What can you make a floor vase from?
There are a lot of materials for creativity. Anything that resembles a tall vase can be used to eventually turn into a work of art. These are various plastic bottles and carboys, large glass vessels, cardboard packaging in the form of tubes, plastic and metal pipes.
Auxiliary materials include ropes, paper, salt dough, stones and even pasta. A tall floor vase can be obtained if you use the papier-mâché method. You can make a very nice wicker from newspaper tubes.
Plastic floor vases
Plastic bottles are turned into floor bottles. Plastic tall structures the results are light in weight. Therefore, they are made heavier for stability. To create, you will need several two-liter plastic bottles.
First you need to cut off the top and bottom parts of the bottles and insert them into each other. There is no need to cut off the bottom of the future vase. Then you need to stick it on the structure in several layers. toilet paper or paper kitchen towels. In this case, use the last layer should be with an ornament created using paper soaked in glue. All this is fixed spray paint. A vase in bronze, gold and copper colors will look very impressive. To ensure that a tall floor vase stands on the floor and does not fall, you can pour decorative stones inside.
Glass vases
To create such a vase, you can buy a ready-made transparent vase or take a large glass bottle. You can decorate it using a thick rope. To secure it to the glass surface, it is convenient to use a glue gun.
To apply a decorative pattern, you can use a transparent sealant. To begin with, the surface of the glass must be thoroughly cleaned with acetone. Now you can apply the pattern. It can be anything, for example, repeating the texture of tree bark. The workpiece must be left to dry for 24 hours. Then you can start painting the vase. You can use two or three colors. Depending on the pattern and the author's ideas. It is better to take acrylic for even spraying. Floor vases, tall, decorated with wood with your own hands, look great with
To create a pattern on a cylindrical glass vase, you can use rubber bands. They need to be pulled onto the vase in a chaotic manner, and then sprayed with paint. The result is a stylish striped pattern.
Floor-standing, tall, glass vases can simply be decorated with various objects (coins, buttons, ribbons, cereals). You can buy stained glass paints in craft stores and create your own work of art from a simple glass bottle.
Vase made of glass jars
Original floor vases for flowers, tall and not very tall, can be obtained if you take two three-liter jars (preferably with a wide neck). They need to be glued together at the bottoms. Any glue for glass will be suitable for this purpose. To make the vase more stable, the bottom jar must be filled with resin. Cover the neck of the bottom jar with a disk or any round object (for stability). After the glued cans have dried, they need to be puttied and painted. Or you can use the papier-mâché method and then apply decorative pattern. To create a vase in nautical style They use ropes, shells and small pebbles. The napkin decoupage technique gives room for imagination in decorating a floor vase.
Vase made from cardboard packaging cylinder
A cylinder made of thick cardboard on which linoleum is wound. You can ask him at construction stores. Next, you can give the product any shape using papier-mâché or gypsum mixture. For stability, glue a circle of plywood to the bottom. Decorate - with any in a known way: cloth, rope, eggshell, nut shells. These vases look beautiful, three in one composition. To do this, they can be glued to one wooden base. The height of the vases should be different.
Pipe vase
Craftswomen learned to make floor and tall vases with their own hands from plumbing or water pipes. It can be purchased at a hardware or specialty store. Afterwards it can be covered with newspaper sheets or thin paper. After drying, apply a universal primer. Interesting solution To decorate such a vase, it will be covered with natural tree bark. In order to disinfect the collected material and get rid of bugs, you need to carry out a number of actions. The bark must be boiled and left in this water for about a day. After this, it needs to be dried well for 2 days. You can glue the bark with any glue that is suitable for wood and plastic. The bottom of the pipe is filled with gypsum mortar or resin. The surface of the bark is covered on top. Several layers are needed.
The result is tall, decorative floor vases that will look perfect in any room design. Especially when it comes to fashionable environmental style.
Floor vase made of newspaper tubes
Perfect for country style. If wicker or rattan is difficult to get, then newspaper tubes are perfect for weaving. First you need to familiarize yourself with the technique for creating these rods. So, you will need a stack of newspapers, PVA glue and a lid from a pot or frying pan. To make flagella, just twist a sheet of newspaper from one corner to the other. If you are new to weaving, then it is better to make the bottom from cardboard. But you can also weave it. Next, we bend the twigs up and begin to weave the leg of the vase. Then you need to make the vase expand. To do this, a lid of a larger diameter than the vase leg itself is used. We insert it into the middle of the weave and continue to weave another 12-15 rows. To narrow the vase towards the neck, you need to use an elastic band. The rim of the vase can expand again. At the end, we braid the remaining rods so that we get a braid along the edge of the vase. We cut off the unnecessary remains of the tubes. That's it, the vase is almost ready. All that remains is to cover it with paint or stain, and then apply varnish.
Such inexpensive and unbreakable vases are suitable for those who have small children and animals at home.
Square vase from a box
To create a square vase, a regular cardboard box will do. suitable shape. If you don’t have one, you can adjust the shape of the box you have on hand using a stapler or glue.
Many people can’t even believe that they can make such tall floor vases with their own hands from simple cardboard. The master class below will help needlewomen create a miracle.
To work you will need:
- decoupage napkins;
- decoupage glue or PVA, diluted with water;
- cardboard box;
- paper;
- scissors;
- and paints;
- aerosol and water-based paints;
- PVA glue.
In order for all the layers to lie firmly on the box, you need to lubricate it with a primer. After drying, you can start gluing pieces of torn paper using PVA. A few layers are enough. After drying, apply a layer water-based paint. We dry it again, and only after that can we apply a layer of base paint, the same color as the future vase. To give the surface a relief, crumple up a napkin and glue it to the surface. Now we cover this relief with paint (of a different shade). Using stencils you can apply patterns to the vase.
DIY wooden floor vases
A do-it-yourself floor, decorative, tall vase can be made from wooden blocks. It will have a square shape. Height and width depend on the preferences of the master.
You will need:
- four elongated, rectangular planks;
- one wooden square(this is the bottom of the vase);
- PVA glue;
- screws;
- mastic for sealing seams;
- acrylic paint;
- decorative elements.
Fold all parts of the future vase and fasten them with glue and self-tapping screws. Seal seams and cracks with mastic. Leave to dry for a day. Afterwards, you need to remove the remaining mastic using a machine and sand the surface. You can decorate the vase in any way. A drawing or ornament applied using stencils and paints looks best on such a vase.
How to choose the right floor vase for the room?
To choose the right floor vase, you need to consider the following factors:
![](https://i2.wp.com/fb.ru/misc/i/gallery/39070/1072008.jpg)
For a small room, vases that are flat in shape and not very large are suitable. For large rooms, tall and wide vases of the most suitable size are suitable. various forms. If the interior contains carpets and curtains with ornaments, then it is better to choose vases with a smooth and shiny surface. Vases with large textures, notches and patterns will look good in a calm and discreet room environment.
Vases can be placed by the window, between chairs, in a niche, against a wall or in a corner. To prevent a bright vase from getting lost, it does not need to be placed close to the furniture.
Before decorating a room with ethnic items, it is worth studying all the ornaments and designs. Do the hieroglyphs mean something not quite decent?
If you need a floor vase only for flowers, then it is better to give preference to a white or transparent vase. Bright colors and decorations will distract attention from the beauty of the bouquet.
A fashionable technique is to place together vases of the same style, but different in color or texture.
The main condition is that the floor vase must be pleasing to the eye and liked by the owners of the house themselves.
A floor vase can become one of essential elements home decor. At the same time, you can even make it yourself from different materials. If you know a few tricks, the product will turn out no worse than store-bought. Ready-made instructions and design examples - about all this right now.
A floor vase can become one of the most important elements of home decor
Before you start making this interesting work,you need to take a close look at the house and try to imagine:
- in which part the vase will look best;
- what tones and decorative elements should prevail in the finished product;
- what flowers and others ornamental plants(twigs) are optimal;
- finally, how large a vase needs to be made so that it looks especially good in the interior.
In fact, it’s enough just to “see” the future vase well in your imagination. And to make it easier, Here are some ideas for inspiration:
- First of all, it is better to decide on the sizes in advance. A vase looks appropriate when it approximately matches the size of the surrounding furniture. For example, it should rise slightly above the sofa or chairs.
- In shape you can choose between round and original options. Calm, symmetrical edges are best chosen to create a peaceful atmosphere. And if you want to enliven the space, it is better to make a vase with an original, curved neck, interesting designs and decorative elements.
- Concerning color design, it is best to make sure that your masterpiece stands out well against the background of the floor, furniture, and wallpaper. Otherwise, the vase will literally merge with the rest of the objects.
DIY floor vase from scrap materials (video)
Choosing decorative branches for a floor vase
The main decoration that can be placed in a vase is decorative branches. A wide variety of decorations are used - and it is not necessary to choose branches of the same type. You can and often need to combine different variants to get more original compositions. Here are a few of them:
- Combinations of black and light significantly enliven the space due to the effect of contrast. This gives a light, pleasant look and looks especially advantageous in combination with lighting.
- The technique of attaching decorative balls to branches has long become quite common. Here you can choose light-colored products, because if necessary, they can be painted in any color, and then the composition will take on a new life.
- Multi-colored, wavy branches, collected in a bunch, are in many ways similar beautiful flowers, collected in a bouquet. And if you place them close to each other, you get a very beautiful view - like fireworks.
- Finally, branches with leaves or small ones look very good, bright colors. They will be appropriate in any kitchen, as they create a very cozy, natural environment.
ADVICE
To create your own unique interior Homemade branches are also great. If you collect several dry branches, clean and dry them further, and then paint them with spray cans, this will not only reduce the cost of the process, but also create much more room for creative imagination.
![](https://i0.wp.com/lovely-dom.ru/wp-content/uploads/2017/10/ld_NAPOLNAYA_VASA_1.jpg)
Making a floor vase from waste material with your own hands
Making a floor vase does not necessarily require special skills or special materials. Experience shows that even from waste material you can create a very decent product and decorate it so beautifully that such a vase will be easily confused with a glass or ceramic one.
When making a floor vase, you can even use improvised materials that can be found in any home:
- cardboard pipes;
- linoleum pipes;
- PVC pipes.
In this case, it is better to take cardboard material, since it is very easy to work with. Of course, you can’t pour water into such a vase, but it looks great as a decoration in the house. You will need the following materials and tools:
- the cardboard tube itself;
- cardboard for making the body;
- a piece of drywall or chipboard for the bottom;
- regular PVA glue;
- pieces old newspaper for working in papier-mâché technique;
- paint for applying glue;
- knife and scissors;
- 7-8 egg yolks;
- putty;
- sandpaper;
- compass, ruler, pencil.
![](https://i0.wp.com/lovely-dom.ru/wp-content/uploads/2017/10/napolnye_vazy_25_06144953-e1507479079848.jpg)
- The most important thing is to determine the height of the finished product. As a rule, the vase should be at least half a meter high, and usually the height chosen is 60-70 cm. It is according to this guideline that you need to cut a piece of cardboard tube - the basis of the future craft. Make it better sharp knife, and the cut must be taken 2-3 cm larger, and then simply trim the edges.
- Now you need to make the bottom. There are two options here - you can use drywall, or you can take plywood. But in any case, the surface must be level enough so that the product rests confidently on the floor and does not wobble. The circle is first drawn with a compass and then cut out. In size it must obviously be larger than the diameter of the pipe (by 4-5 cm). Attached to the base with glue.
- Now comes the most important and lengthy stage. You need to take several sheets of cardboard (they can be obtained by unfolding large carton boxes), which should be no less in length than the height of the vase. The outline of identical blanks is drawn on them, which will give the vase volume - that is, you need to cut out up to 20-30 identical parts that completely follow the curve of the product.
- And 4 more blanks are cut out along with the handles (if the craft provides for such an insert).
- Parts with handles are glued on each side, 2 pieces, and the rest are glued at a distance of literally 1 cm from each other. This will ensure an attractive appearance and reliability of the entire structure.
- Next, you need to wait a few hours so that all the workpieces adhere well to the surface. At the same time, it is better to check again how firmly they are stuck.
- In the meantime, you need to make a lot of pieces of newspaper, smeared with glue - you have to make the surface using the papier-mâché technique. It is important to keep in mind here that it is better to make several layers so that the paper lies as tightly as possible.
- Then mix the egg yolks with PVA and thoroughly and thickly wash the entire surface of the workpiece.
- Now you need to wait again until it dries and apply a layer of putty.
- And when the putty hardens, carefully sand the surface with sandpaper.
- The last stage of work is the most interesting and truly creative. You need to draw a picture or just put a layer of paint from aerosol can. And now the masterpiece is ready to please the eye.
Gallery: floor vases (50 photos)
How to make your own fabric floor vase
Now you can consider another manufacturing option - the vase can be made from fabric. For this you will need the following materials:
- the basis of the design is a terry towel (a woven napkin is also suitable);
- cement and sand;
- two standard 10-liter buckets;
- water;
- polyethylene film.
NOTE
It is better to work in disposable rubber gloves so as not to damage the skin from the action of cement.
The manufacturing technology is very simple:
- First, cement (literally half a kilogram) is poured into a bucket and water is gradually added until a consistency similar to liquid sour cream is obtained.
- A towel or napkin is dipped into this solution, and it is important that it is completely soaked.
- Now this napkin is placed on an inverted bucket to dry completely. First you need to completely cover this bucket plastic film so that the towels do not stick to the surface.
- The surface of the bottom is carefully smoothed, and the falling folds can simply be straightened.
- The bucket is taken outside or placed on the balcony to dry during the day.
In fact, the floor vase itself is already ready. However, you still need to try to make the surface truly beautiful and attractive. To do this, we proceed as follows:
- Take 300 g of cement and sand, add one pinch of plaster and dilute the mixture with regular wallpaper glue (15%).
- Using a brush, thoroughly cover the entire surface of the workpiece with this solution.
- You can also initially add any acrylic paint to the solution and paint the craft at the same time as processing.
How to weave a floor vase from paper tubes (video)
How to make a large floor vase from burlap with your own hands
And another one is quite affordable option– make a floor vase from burlap. For this you can even take old material, and also You will need the following materials and tools:
- PVA glue or “Moment”;
- rope (twine);
- cardboard tube;
- molar tape;
- scissors;
- ballpoint pen.
The sequence of actions is as follows:
- In this case, the main product is also a cardboard tube. It is cut to the required height, all edges are carefully aligned.
- The surface is covered with molar tape on all sides so that eventually each area becomes sufficiently sticky.
- Twine is sequentially wound onto the tape - in this case it is better to start with inside. Then the workpiece will look very neat.
- Meanwhile, quite a lot needs to be made from burlap decorative elements: roses from circles with a diameter of 8-10 cm and leaves (also about 8 cm each, and it is better to highlight the veins and petiole with twine).
- Having imagined and drawn a picture in advance, cover the vase with roses and leaves.
ADVICE
This craft turns out to be especially cozy due to the peculiarities of the surface texture. If you make a smaller copy of the vase, you will get an excellent case for combs, cosmetics and other pleasant little things.
![](https://i1.wp.com/lovely-dom.ru/wp-content/uploads/2017/10/cache-pot-branchagesfkugih.jpg)
Options for decorating a purchased floor vase
If you have a purchased floor vase at home, this does not mean that the space for creativity is sharply narrowed. On the contrary, even the finished product can be decorated in such an interesting way that as a result of decoration it will look much more original.
How to decorate a glass floor vase
A glass vase provides especially rich possibilities for creativity, since the product is transparent and can be filled different materials to create an original drawing. Here are some ideas for inspiration:
- spray paint coating - both in one layer and in several colors;
- decoration with artificial flowers;
- decoration using bulk materials different colors(beans, peas, cereals;
- decoration with twine and textiles.
![](https://i0.wp.com/lovely-dom.ru/wp-content/uploads/2017/10/napolnye_vazy_35_06145006.jpg)
Unusual decor ideas for a finished floor vase
Here are a few interesting ideas for floor decoration PS:
- Decor using knitted clothes - by covering a vase or its individual elements with a sweater, you can create a very cozy atmosphere– this vase looks especially good in the bedroom.
- Decorating with twine rope has the same effect. You can not cover the entire vase, but only the neck or handles.
- Roses, leaves, spirals, patterns and other decorative items made from thick fabric warm shades.
- A vase covered with ordinary pasta looks incredibly beautiful and even mysterious, which then needs to be painted with an aerosol, stylizing the surface as metal.
- And if you want to stylize it as antique, you can decorate it with coins, which you have previously painted in dark brown or golden tones - let such a vase attract wealth into the house.
DIY cardboard vase (video)
Thus, you can decorate your home with a beautiful floor vase in any case - how homemade craft, and purchased. The main thing is to clearly imagine the future appearance of the vase and, of course, stock up on inspiration.
Every housewife dreams of having something unusual and suitable specifically for her interior. It’s especially nice when this thing is made with your own hands. Stained glass painting has always fascinated me. It turns out that decorating a vase with your own hands at home is possible. The main thing is to determine the degree of complexity of the work being performed and relate it to your capabilities. If decorating vases is new to you, then I advise you to start with simple work. Let's start with a simple technique - applying geometric patterns.
Geometric patterns
For this job you will need:
- acrylic or stained glass paint for glass surfaces. You can also use spray paint;
- brush (we use synthetic for acrylic paints, natural for stained glass);
- scotch;
- alcohol;
- cotton wool
Drawing technique:
- Degrease the glass surface with alcohol or any degreaser;
- We paste strips of tape over the vase to create a pattern;
- We paint the parts without tape, going over it. This is necessary to ensure that the edges of the picture are neat.
- We are waiting for the paint to dry. At this time, it is better to remove the vase to avoid accidental touches and smudging of the paint. Each paint dries differently, read the directions on the paint package.
With this technique you can achieve great variety drawings from parallel lines to various intersections. You can also cut out various geometric shapes and stick them on the surface of the object to be decorated. Do not apply a thick layer of acrylic and stained glass paint to the surface, as this may cause smudges.
For the first work, I do not recommend choosing rounded shapes; they are more difficult to work with. Faceted vases work better. We work with one edge, wait for it to dry completely and move on to the next. The easiest way to work will be with spray paint. It is applied in an even layer and the spray paint dries very quickly. As for stained glass paints, their drying time can be significantly reduced. To do this, just put the painted vase in the oven for 15 minutes at 150 degrees.
This technique came to us from antiquity. Distinctive feature Pique painting is the size of the dots, the spacing between them, the combination and color scheme.
Drawing technique:
- Degrease the glass surface with alcohol.
- Apply the outline with a dotted touch.
If you are a beginner artist, you can draw a sketch of your drawing on a piece of paper and attach it from the inside.
You can also use ready-made sketches by downloading your favorite picture from the Internet. Before applying the outline to the vase, test it on a piece of paper. This is done in order to feel its thickness. Only then proceed to drawing on the vase.
If you go beyond the line, you can quickly correct the defect before the contour dries out. Wipe off with cotton wool and alcohol and continue working. Consider the transparency of the vase; place the design on one side or at different levels.
This is necessary so that the image does not overlap. Try to maintain the same spacing between dots.
I used 2 types of fills in my work: Marabu and Decola. They are on different bases and behave differently in their work. Decola paint was in a tube on water based. And Marabu is alcohol-based in a jar and needs to be applied with a brush. It is more liquid and can be mixed to obtain various shades. Decola paint cannot be mixed, so shades and transitions in one contour are more difficult to create with this material. Color transitions can be accomplished by breaking one contour into smaller ones.
![](https://i2.wp.com/roomester.ru/wp-content/uploads/2017/03/dekor-vazy-svoimi-rukami-20.jpg)
Do not leave voids in the contours when painting and make sure that the contours are closed. This is done so that the paint does not leak. I would recommend starting with faceted vases as they are the easiest to work with. If you do get to work with a round vase, then try to apply the fill thin layer to avoid paint leakage.
Vase decor with fabric and ribbons
You will need:
- ribbons;
- lace;
- textile;
- glue.
Decoration materials can be of all kinds. The only limitations may be the size of the bottle and your imagination.
Decor of vases with beads
You will need:
- glue or glue gun;
- beads strung on a thread or individual beads.
You can replace the beads with more natural materials: cereals, watermelon seeds, coffee beans. You can also use pasta that can be spray painted.
Decoupage
The word decoupage literally translates from French as “cutting.” In other words, the essence of decoupage is to perform appliqué. In my opinion, this technique is quite simple and does not require special skills.
But you need to be patient and scrupulous. To perform decoupage work, you must adhere to the following tips.
Technique for performing the work:
![](https://i1.wp.com/roomester.ru/wp-content/uploads/2017/03/dekor-vazy-svoimi-rukami-43.jpg)
Decorating a vase with natural materials
How wonderful it is to receive a bouquet of flowers as a gift or simply pick them in a field and bring them home to fill the atmosphere with a fabulous aroma! Be that as it may, you will definitely need a vase.
Decorating your home is common to all women. They lovingly arrange their life, decorating cozy home cute trinkets, including a variety of figurines and vases. Of course, it's easier to buy already finished goods, but if you want something exclusive and unusual, read our article. In it we will tell you how to make a vase with your own hands.
How to make a paper vase with your own hands
You can make a vase completely out of paper at home using papier-mâché or origami techniques. But for this you need to have certain skills, and this is not suitable for everyone. And be sure to keep in mind that only decorative flowers can be placed in a vase made of cardboard or paper, because water will render the product unusable.
To make a vase out of paper, you can use any transparent container like old can or a used bottle. To give them beautiful view the surface should be covered corrugated paper chosen color or wrap it in colored cardboard and decorate with matching ribbons.
DIY paper vase: video
Tip: to ensure that the paper sticks well to the glass, use PVA glue diluted with water in a 1:1 ratio.
How to make a cardboard vase with your own hands
For work we stock up:
- cardboard;
- scissors;
- glue;
- paper clips;
- tape;
- coffee beans, nut shells, pistachios (for decoration).
We take any large box, lay it out on the floor or on the table and draw a diagram on it (Fig. 1). Then we cut out the shape and fold the vase out of cardboard, securing the corners with tape. Carefully glue each fold so that the vase does not fall apart. If necessary, cover the outside of the product with paper, wrapping it inside and securing it with paper clips.
It's time for decoration. Of course, it is difficult to calculate how many decorative elements will be needed for decoration homemade vase, but in the process of work you will figure it out and, if necessary, buy the missing amount of parts. So, smear each piece with glue and, starting from the bottom of the vase, begin to carefully paste it over. At the same time, try to leave as little empty space between elements as possible. The result should be a vase, as in the picture shown.
Do not forget to process in a similar way and top part products from the inside. That's it, the vase is ready to decorate your home!
DIY cardboard vase: video
To make a vase with your own hands you will need: 1. Corrugated cardboard; 2. Mass of papier-mâché; 3. Masking tape; 4. Hot glue; 5. Acrylic paints and varnish.
If you have a few hours of free time and a desire to create something beautiful with your own hands, read how to do it simple vase DIY paper origami.
In fact, you don’t need anything other than double-sided colored paper and strictly following the instructions! In addition, origami - great way develop fine motor skills, imagination and logic.
Simple paper vase useful for storing office supplies; you can also put a vessel with water and flowers in it.
So, let's get to work. We take a square of colored paper and bend it diagonally, then unfold it and do the same with the opposite diagonal (see Figures 1-3). Then you need to fold the sheet into a diamond shape and smooth the lines with your fingers, along which we will then bend the part (see Fig. 4-6).
Now we bend the left and right corners, turn the part over and repeat the steps with the remaining corners. After this, we unbend the central corner, lowering it to the middle, and bend the left corner. Then you need to turn the workpiece and repeat the manipulations: bend the corners to the center and along the intended lines. The lowest corner is unfolded and unbent: this is necessary for the stability of the vase.
The procedure can be viewed in more detail on the provided step by step diagram with images. Experts say what to do beautiful vase It is unlikely that you will succeed with origami the first time, because the work is painstaking and requires some skills, so it is better to try on unnecessary pieces of paper.
If desired, decorate the vase by applying touches of glue to the surface and filling them with colored semolina, sparkles, rhinestones or beads.
In the next collection of pictures you can see how to make a vase from modules - parts from which it is then assembled decorative item. To make the vase bright, use modules of different colors.
This work is considered more complex and requires experience and thoughtfulness: one wrong step and everything will go down the drain.
Vase made from origami modules: video
Modules are made of 1/32 rectangles
Video: how to make 1/32 origami modules. Master class for beginners.
Now we will tell you how to make such an unusual and stylish vase for storing small items. Please note that the product is not intended for food!
Take a plastic bottle of any color, hold it over the fire to bend it: this must be done while the plastic is hot. After cooling, take a soldering iron and drill in a chaotic manner a large number of holes of the same diameter. That's it, our vase is ready!
You can take an ordinary plastic bottle and sew a case on it from felt or an old sweater. This decor is perfect for decorating a country house interior.
A plastic bottle or box of chips can also be transformed beyond recognition by covering the surface with stones or shells.
The most basic way to decorate a plastic bottle is to wrap it in printed tissue paper or colored tape, and then decorate it with a matching bow.
You can also wrap the bottle with colored threads or rope.
DIY vase from a plastic bottle: video
Vases made from natural materials
IN modern world There is such a lack of environmental cleanliness that you want to be closer to nature even in urban conditions. Eco-design is very relevant today, so if you are choosing a vase for your garden, feel free to follow our advice.
![](https://i2.wp.com/lady-blesk.ru/wp-content/uploads/2016/11/kak-sdelat-vazu-svoimi-rukami-12-819x1024.jpg)
Pumpkin crafts are a great way to show your imagination and bring the family together over shared needlework. To work, you need to stock up on a sharp knife, a spoon and pumpkins of different sizes.
Take the pumpkin and cut off the top, and through the hole, clean it of the insides and let it dry. Instead of throwing away the pulp, you can use it to make face masks. Let's start with making the simplest versions of environmentally friendly vases.
The edges of the vase can be made “lace” by carefully cutting them with a thin knife.
If you're familiar with , put your skills to use by making a unique pumpkin vase that you can place lit candles inside!
How to make a vase from maple leaves with your own hands
And kids will surely like such a vase, because it’s fun to make and it’s also interesting to use! Collect a bunch maple leaves, clean off any dirt and trim their stems. In the meantime it is necessary to inflate balloon and spread it with glue to the middle. Glue the leaves overlapping each other using PVA glue and a brush. Let the product dry. When the leaves are dry, pierce the ball and carefully remove it.
Good luck in your creativity!