Help on Tele2, tariffs, questions

Despite the fact that the peak of popularity of the anti-stress toy that was fashionable in 2016-2017 has begun to subside, many are still looking for ways to create an original little thing that will help them spend time not boring on long trips, long queues or difficult situations. life situations. Naturally, we are talking about a do-it-yourself spinner. How to create it at home, and what you need for this - read more in our material.

What are spinners for and how do they work?

Each twist dismantles the individuality of its owner.

Fidget spinner is a rotating flat or three-dimensional toy that is popular with adults and children throughout to the globe. Its main purpose is to occupy and distract . Some people think that spinner is useful , because thanks to him you can take a break from everyday life and psychological problems, relieve irritability, get rid of anxiety. Others claim that thanks to the turntable you can focus on the right things, distracting from everything unnecessary. Be that as it may, the fame of the toy does not need explanation, because literally everyone loves it.

There are many forms of the so-called hand twister. It will depend not only on the invented design, but also on the components available in stock. To understand the specifics of the work when creating a spinner with your own hands, you need to know just a few important points.

Mandatory traditional elements of a spinner are:

• bearing;
• wings.

The most important part of the spinner is the bearing. It will depend on him how long and quickly the toy will spin, as well as its sound and vibrations. In many homemade toys bearings are often replaced with primitive toothpick designs , which also allow the toy's wings to spin.

Wings, or petals, can be from two to six , but often you can find two or three petals. It is these elements of the spinner that give room for imagination, allow you to embody bold ideas and show individuality.

Unusual design one of the most primitive forms of a toy - round.

The so-called twisters made from plastic, metal, wood, cardboard and many other materials. Often materials are combined. Recently, plastic or metal toys with glowing wings.

Products made of plastic, wood and copper.

The design of many hand-made spinners is amazing. Many people decorate their toys with interesting engravings, illustrations, and icons. . The model of a small spinner that fits in the palm of your hand allows you to characterize its owner without further ado.

Spinner in the shape of a Snitch.
Fairy-tale illustrations and details look very interesting on spinners.
Men's design turntables.
Lately, glow-in-the-dark toys have become very popular.
Fidget spinners in women's design.

Today, a spinner can be bought in almost any store. There are budget models, and there are expensive original or even designer ones. But to stand out from the crowd, you need to make a certain effort, for example, make it yourself original item for yourself or your child, relative, friend (for example, as a gift). If a child asks for such a fashionable product as a spinner, so much the better, because he can be involved in the creative process, starting with choosing a model and ending with creating a memorable toy.

General instructions before starting work

Before you start working on your spinner, you need to have an idea of ​​what exactly a person wants to get as a result. To ensure that the result does not disappoint, you need to work according to a simple scheme.

• Stage No. 1 - selecting a model and design

Because possible models There are countless spinners, and we are all different, and we like different things, then first you can choose suitable model from the simple ones. This is necessary so that the process does not turn into punishment. Or you can go the other way and choose the most original model made of special material unusual shape. This option will do for those who have already tried to create things with their own hands.

Options for creating a hand spinner with your own hands.

• Stage No. 2 - draw and draw

For everything to work out, you should take care of the drawing on a scale of 1:1. You can draw the future spinner model on paper, or you can search for ready-made drawings on the vast expanses of the Internet.

Drawings and blanks.

• Stage No. 3 - prepare tools

Now that the creator has decided on the design and the schematic image is ready, you can begin to prepare all the necessary materials.

The first step is to purchase (or remove from old equipment) a bearing. It can be made of metal or ceramic. The most acceptable option is a diameter of 2 mm. To ensure a pleasant pastime in the future, professionals advise clean the part from grease in a "bath" of gasoline before it ends up in the toy. Why clean the bearing from grease? It makes the rotation slower, and also gets your hands, clothes and furniture dirty.

In addition to the spinner assembly parts, you will also need the following tools:

1. Construction marker (pen, pencil, regular felt-tip pen);
2. Scissors;
3. Stationery knife;
4. Elements decorative finishing(optional);
5. Glue;
6. Special tools for creating the wings we need (tools for working on wood or metal).

Preparatory stage.

• Stage No. 4 - creating a spinner

When the preparation is complete, you can safely start making the toy with your own hands. Next, we will consider several popular options for creating spinners from various materials in several ways.

Varieties of hand twisters made from improvised means.

Spinner made of paper and cardboard without bearing

The most popular option for those who are in no hurry to run for a bearing and cut out squiggles from metal or wood is to make the first simple spinner from cardboard and paper. It’s really not difficult to do this with your own hands, and if you show a little more imagination, then a simple cardboard can turn into an original canvas for your favorite icons or drawings.

Tools for work:

1. ruler;
2. compass;
3. pencil;
4. pen;
5. scissors;
6. stationery knife;
7. cardboard;
8. glue;
9. toothpick;
10. nut - 2 pcs.

You can watch the step-by-step process in the video:

Using plastic covers

Another simple way to create a spinner with your own hands, which will take a little more time, is a model from ordinary bottle caps. By the way, this method also does not require bearings. Here's a little step-by-step instructions.

Tools for work:

1. caps - 4-6 pcs.;
2. plasticine (you can use kinetic sand);
3. glue gun;
4. glue stick;
5. lighter;
6. awl;
7. stationery knife;
8. toothpick;
9. scissors.

Progress:

• Fill three lids (or more if the spinner has more wings) almost to the top with plasticine. We secure it with a layer of glue from a gun, which should fill the lids to the top.
• The main cap remains without filler. We make a hole in it with an awl in the very center. We glue the lids with plasticine on the sides to this central part of the future spinner. It is important to do this at an equal distance from each other.
• Take a glue stick and cut off two equal parts - about 1 cm each.
• We break the toothpick in the center. We insert it into the central cover and attach pieces of silicone rod to the ends so that it is convenient to hold the piece of wood.
• Your DIY spinner is ready!

Wooden with bearing

A wooden spinner is the most pleasant and affordable option, which you can create with your own hands. A real lesson in labor for adults and children!

Tools for work:

• Glue gun;
• Bearing 2 mm;
• Plywood sheet, thickness 5 mm;
• Several coins;
• Drill;
• Hand jigsaw;
• Clamp;
• Scissors;
• Sandpaper;
• Pencil or construction marker;
• Ready-made spinner template.

Progress:

1. Print out the diagram and cut it out. We fix it on plywood sheet and circle it. It is necessary to mark the places in each of the circles where there will be holes.
2. We drill additional holes on the sides of the circles with the door, allowing us to cut out beautiful figure circle from inside the wing.
3. The future spinner needs to be cut out of plywood with a jigsaw. Then carefully sand the edges and surface until the surface is smooth.
4. The bearing must be inserted into the hole prepared for it in the center. If you have difficulty, you can use a hammer and hammer in metal element in a wooden one.
5. The wings of the “spinner” need to be weighted down—for this you will need coins. You can glue the weights for each hole in the following order: a coin with a face value of five rubles, then two, and again five, as shown in the video.
6. You can cover it with a solid color paint, or you can decorate it with another interesting and in an original way- there is room for imagination, which is so nice to realize with your own hands.

Video tutorials on creating spinners

To get comfortable with creating a spinner with your own hands, you can watch some video tutorials on this topic. The conditions for creation can be very different, as well as materials and styles, but a homemade spinner can turn out no worse than a factory one.

Here's another way to create paper twisters, this time in the shape of shuriken :

Hello, dear readers! In our technological age, every day there are some new products, toys, electronic devices. More recently, a new spinner toy has become popular in Russia. The toy has become popular among schoolchildren and teenagers. Let's find out today what a spinner is, where to buy it and how to make it yourself.

First, let's define a toy and consider: a spinner - what it is and what it is needed for. The object consists of three rounded blades held together by a metal or ceramic bearing. There are weights on each side. The toy has other names: fidget spinner, fidget spinner, skewer, spinner and others.

A little history

The spinner was invented back in the 1990s, but only today has it gained widespread popularity. The invention is credited to American chemist Katherine Hattinger. In Israel, she saw boys throwing stones at other people and thought about making them less aggressive.

According to another version, she created a toy for her seriously ill daughter, who suffered from an autoimmune disease that causes pathological muscle fatigue. The first hand spinner was made from newspaper and tape. I liked the toy so much that Katherine began making even more copies of the spinner and sending them to customers.

In 1993, she patented the invention and released plastic toys, but they were not successful. The patent expired in 2005.

In 2016, Forbes magazine named the fidget spinner a must-have hand toy for the office. It relieves stress well and helps you concentrate.

Tricks with a figner

Already in March 2017 in in social networks Videos began to appear showing tricks with the figner. The toy is very easy to use. The central bearing of the hand spinner is grasped index finger. Beginners can simply twist the fidget. Advanced users move the spinner from finger to finger and perform more complex tricks.

The basis of all tricks with the product is tossing it from hand to hand without stopping. The next level of skill is throwing it behind your back or over your leg. It is important that the fidget does not stop or reduce speed.

You can throw the toy in the air and catch it with one hand or the other, spin it horizontally or vertically. This is probably where the leading types of tricks end. All that you were able to see were just variations of the described actions. The video shows what you can do with this thing:

Why do you need a spinner? First of all, to combat nervous situations. But today it is increasingly becoming a method of demonstrating sleight of hand. The toy develops fine motor skills, so it is useful for people who have problems with this. The main thing is not to overdo it with training.

Where to buy a spinner?

It is not possible to purchase a toy in a regular store. For now, the item is sold in online stores. Sometimes on message boards you can find offers for the resale of used spinners.

But if you want new toy, you can buy it in one of the largest online stores - Aliexpress. They even sell a glowing spinner that will be yours distinctive sign. The price of the item starts from 600 rubles (plastic models) and above.

The cheapest spinner hovers around this cost and can only be made of plastic or wood. If you want a metal thing, you will have to pay more than a thousand rubles.

When deciding which store to purchase a spinner from, carefully study how much a similar product costs in other stores. If you want to buy a quality item inexpensively, be sure to analyze the offers offered by online stores. There are quite a lot of them, so it will be easy to find the optimal one.

Here are some offers that may interest you:

1. Aliexpress- Very big choice, affordable price, but wait a little longer than ordering in your country
2. in a cool store Gyrotown you will find interesting models spinners with delivery throughout Russia (price from 490 rubles and above)

How to make a spinner with your own hands?

If you don’t have the money to purchase a new fidger, but still want to have a toy, make it yourself at home. If you think it's difficult, you're wrong. We will introduce you detailed drawing on how to make a little thing, and video lessons will be additional helpers.

Wood product

The most durable and simplest option is made of wood. For production you will need:

• a piece of plywood 6 mm thick;
• jigsaw;
• bearings with a diameter of 20 and 22 mm;
• coins of 50 kopecks;
• Super glue;
• solvent;
• sandpaper;
• gouache paint and a brush for painting (if you are not interested in the color of the product, you can do without paint).

Operating procedure:

1. We apply the spinner pattern to the plywood.
2. We cut along the contour and cut holes inside for the bearings.
3. Treat the bearing with solvent so that it rotates well.
4. We insert the bearing into the central hole so that it fits exactly into the slot.
5. Glue the coins with superglue into small piles of 5 pieces.
6. Treat the spinner sandpaper, just remove the bearing first.
7. Insert the bearing into the product.
8. To make the spinner spin well, insert glued coins into the remaining holes.
9. The toy is ready. In this form it will spin for 1.5 minutes.

Here detailed video this process:

Now let's solve the problem easier and make a bearing out of paper. To make this you will need a small square sheet of paper. Next we proceed like this:

1. Fold a sheet of paper in half.
2. Unroll and fold in half again with the other side.
3. Unfold and fold to form a triangle.
4. We do the same on the other side.
5. Fold side to side again.
6. We bend the resulting triangle inward on one side.
7. The result is a parallelepiped that can be placed on two legs.
8. Let's make a few more of these.
9. We insert one workpiece into the other, bending the remaining ends in the original part inward.
10. We insert more blanks one into another until a circle is formed.
11. We move the blanks inside the circle so as to eliminate the hole inside.

The spinner without bearing is ready. It spins quite quickly and can easily replace a wooden or metal one.

Lids product

An excellent spinner is made from caps. To make it, take three lids from plastic bottles and superglue.

1. First glue the two lids together. Pour a little salt onto the attachment point (salt is needed to make it stick faster) and again apply a layer of glue. We repeat this again.
2. Glue another cover in a row.
3. Use a hot awl to make a hole in the central lid.
4. Take the rod ballpoint pen and cut off a small part from it.
5. We insert the rod blank into the hole, and the spinner is ready.

Here's a video:

If desired, you can add another side cover, then the product will be as similar as possible to a real fidget.

Lego toy

A Lego toy is perfect for children. It can be made with or without a bearing. Let's try the first option: it is more popular and preferable. The following parts will be required:

• a rectangle with holes: there should be seven of them;
• stick with limiters;
• two small round pieces with holes;
• four small rectangles;
• eight quarter circles or large rectangles for the blades.

Let's start making:

1. We place the stick in a rectangle with holes in the middle and secure it with stops.
2. On top of them on both sides we string round parts with holes.
3. Using the holes in the rectangle, we secure quarter circles or rectangles on four sides.
4. We insert small rectangles on top of them, closer to the center.
5. Place the remaining quarter circles or rectangles on the top layer.

There you are detailed photos process:

Such a product without a bearing will not balance on your finger without moving. But if you twist it, it works no worse than a regular fidget.

The simplest one is made from paper

This is the simplest version of the fidget; children and their parents can make it in five minutes. I won’t even describe it, I’ll just show pictures and you’ll understand everything.

Which bearing to choose?

At your discretion, you can make a toy from any material. If you decide to choose a model with a bearing, it is worth deciding what bearings are needed for the spinner. Traditionally, DIYers choose a part with a diameter of at least 20 mm and no more than 30 mm.

The standard size of purchased bearings is 22 mm. However, practice has shown that the optimal diameter is still considered 25-27 mm. Try experimenting and find the best size for you.

The middle of the product is made from the bearing. She has suitable shape and is excellent for starting rotation. The bearing can also be used as a weighting agent for the blades. Try to keep all the parts on the sides the same size, otherwise the blades simply won’t spin.

The fidget spinner is a popular stress reliever. Still, be careful with him. A toy can also become a bad habit, and it will be difficult to unlearn it.

Spinners entered mass fashion not so long ago, but in just a few months they won the hearts of not only adults, but also children. Today, spinners spin everywhere: on the street, at work, in the subway and even in kindergarten! And every child wants his toy to be somehow different from those that his peers already have. You can buy an original spinner, but such a toy is not cheap, and finding a unique spinner takes a lot of time. The best decision- make a spinner yourself.

So, we present to your attention a few simple ways how to make a spinner with your own hands from materials that everyone has at home.

1. How to make a spinner from plastic caps?

Materials: caps from any plastic bottles of the same size (4 pieces), plasticine, hot glue, nail, scissors, lighter and toothpick.

What do we have to do: put plasticine in 3 lids, use hot glue to seal the remaining space of the lids. Take the fourth lid (without plasticine) and make a hole in it, for example, with a heated nail. Glue the caps with sand to the one where you just made a hole. Take a glue stick and cut 2 small pieces (1 cm) from it. Break a toothpick in half and put a piece of glue on one end (make sure that the sharp tip of the toothpick does not stick out) and place it in the center of your future fidget spinner. WITH reverse side Place the remaining piece of glue stick on the tip of the toothpick. Your spinner is ready!

For more interesting looking, you can color the caps in different colors acrylic paints.

2. How to make a spinner from cardboard?

Materials: plastic bottle caps, cardboard, scissors, marker, awl or nail scissors, glue, 3 coins and a pen refill.

What do we have to do: Using the lids, draw 4 circles on the cardboard in the shape of your future spinner. After this, cut out 5 such blanks and glue them together, carefully gluing the edges. Next, cut out smaller circles. Using an awl or thin nail scissors, make a hole in the center of the spinner. Glue 3 coins or any stickers on the sides of the blanks.

Next, take the set aside pen shaft and carefully cut 1 cm from it. Make small holes in the center of two small circles. Insert the cut piece from the handle shaft into one of the circles and glue it along the edges of the hole to secure it securely. Insert this circle into the center of your spinner and glue the second circle on the back side. The two remaining small circles can be glued on top of the ends of the rod. To make your spinner spin faster, place some kind of spacer between the spinner blank and the small circles (in our example we used metal pendants).

Ready! Let your child decorate his spinner as he wants, you can use glitter, stickers, rhinestones and other decorations.

3. How to make a spinner using bearings?

Materials: bearings (3 pcs), tie clamps, glue gun or superglue (for a more complex spinner).

What do we have to do: wrap cable ties around the bearings on all sides. Cut off the extra clamps and that's it - the spinner is ready!

To make it brighter and more attractive, you can make the design more complex. Take 7 bearings, place 6 of them around the seventh. You will not use all 7 bearings, you will only need 3 circular and 1 central. You need the remaining bearings only for accurate measurements, so we will leave only those that form a triangle. Glue all the necessary parts using glue gun or superglue. The spinner is ready! Decorate the spinner as you wish. You can glue the fluffy wire, apply glue to the sides of the spinner and cover the edges with glitter.

Rest assured, no one else will have spinners like your child’s!

Spinner made of bearings

Basic rules for making a current turntable: central bearing; radially located weighting blades.

With some skill, you can make a spinner based on four bearings. Buy them at a sports store that sells skate parts.

Prepare the center of the toy: remove the anthers on the sides with a knife and place the part in the solvent for 3-5 minutes. To remove grease, clean the bearing with a toothbrush and dry thoroughly with a cloth.

Use superglue to attach the blades to the prepared center. If you try, you can make a spinner even better than a store-bought one! Decorate it creatively, for example, cover it with colored cord.

How to make a spinner without a bearing

It's very easy to make a spinner using four plastic bottle caps of the same size. The future blades of the gadget will serve as counterweights, so fill them with plasticine and fill them with a glue gun.

Using a hot knitting needle, make a hole in the center of the fourth cover. This part is the middle of a homemade spinner. Glue three blades to it. After this, complete the axis of the spinner.

Make two lengths of glue gun rod, each about a centimeter long. Place the center of the spinner on half a toothpick, and place pieces of glue sticks on both sides of the axle. Paint the gadget with acrylic paints.

You can make a bearing at the center of the spinner, which is attached to a pre-cut shape from plywood. Excellent blades will be made from coins glued together.

On the Internet you can find instructions for making a spinner made of cardboard using the origami technique. To create a collection of unique gadgets, use your imagination and try to invent new ways to make a spinning toy.

Interesting facts about the spinner

• The invention of the fidget spinner is credited to Ohio chemical engineer Katherine Hettinger, who built a soothing fidget spinner for her sick daughter in the 1990s.


• In its current form, the spinner was patented by Scott McCoskery. According to him, the metal pinwheel, which he invented in 2014, helped him cope with anxiety during business meetings.


• The wave of popularity of the spinner came in 2017. In some American schools the gadget even had to be banned because it distracted students from their studies.


• In pursuit of the current trend, Kim Kardashian released golden fidget spinners in 2017, and with the Novosibirsk spinner, welded from Zhiguli, she collected hundreds of thousands of views on YouTube.


• Experts say that the spinner develops fine motor skills, relieves stress and irritation, and helps to concentrate. The benefits of gadgets for patients with autism and ADHD are stated.

Video on the topic

Nowadays such a thing as a spinner has become fashionable. At almost every step you can meet a passerby twirling this simple device. Now it has become popular not only to spin the spinner in your hands, but also to draw it. This turns out to be not at all difficult to do, try it.

You will need

• - a simple pencil
• - ruler
• - eraser
• - compass
• - colored pencils (markers, paints)

Instructions

So you have a blank slate. Imagine an isosceles triangle on it. Bad imagination? Then draw it along the ruler, pressing lightly on the pencil so that you can easily remove it with an eraser.

Draw one even circle at the corners of the triangle. If you have light hand", then you can handle it yourself; if not, a compass will help you. So, three circles are ready - this is the basis of the future spinner. Now you don’t need the triangle and you can remove it with an eraser.

In the center between these three circles, draw another, identical circle. In the center of each outer circle, draw two rings: one larger, the other smaller.

Spinner is fashion toy, invented in the USA. It appeared in Russia in 2016 and has already gained extraordinary popularity. What is it? She is called a spinner, a spinner, a fidget.

It develops fine motor skills of the fingers, relieves anxiety and has an anti-stress effect. Fidget spinner is not only a toy designed to entertain children and adults. This is a great way to spend time waiting, traveling in public transport, and queuing. This turntable also allows you to get rid of bad habits, such as tapping your fingers on the table surface, repeating hand movements, and even the habit of smoking. Will allow you to get rid of bad habit twist something in your hands. The working principle of the fidget spinner is the use of a bearing in the middle of the product with petals.

The fitget has two, three, four, five, and some models even six petals. The most common are toys.
The spinner is made of wood, brass, bronze, plastic, and can be combined.

Two types of bearings are used: metal, like, or with ceramic balls. Characterized by rotation time. The spinner rotates from one minute to several tens of minutes. The longer the rotation occurs, the better the quality of the toy.
The cost of the product is affected by use quality materials in the manufacture of a body with petals. The easiest way to buy a spinner is in.

Making wood in a home workshop

However, a person familiar with tools can make such a toy for himself. For this you will need:

1. A small piece of wood, preferably hardwood;
2. Bearing (suitable for a broken skateboard);
3. Sleeves or suitable pieces of round metal;
4. Epoxy adhesive.

Video with instructions for making a spinner from wood

First of all, we mark a piece of wood. A square piece is required.
We drill a hole in the center and expand it under external dimensions bearing. The thickness of the workpiece must be equal to the thickness of the bearing. The next step is to insert the bearing and glue it with glue.
From two opposite sides We drill two holes equal to the smaller diameter of the sleeves. Then we take the polished sleeves, glue them in pairs and mount them with glue in the prepared holes of the board. Let the glue dry.
We clean, sand and paint in the color you like. A simple spinner with two petals is made at home. In the same way, you can make a homemade gadget from plexiglass or PCB.
It is more difficult to make a product with three petals. To do this you will need a drawing, a jigsaw and a protractor. The diagram below clearly illustrates how to make such a toy.

Paper spinner

• It is much easier to make a hand-held spinner from paper.
• We print the drawing on a regular printer.
• Transfer the drawing to thick paper or cardboard.
• We cut out 15-20 samples according to the template. Using scissors, we make a hole for the bearing, slightly smaller than the outer diameter.
• Glue the cut out samples with PVA glue.
• Place under the press.
• After the glue has dried, insert the bearing.
• We clean it with scissors and, if necessary, sandpaper.
• Paint it in the desired color. The toy is ready.

Video with instructions for making a paper spinner without a bearing at home

As you can see, the cost of the product consists mainly of our own work, because Parts from out-of-circulation mechanisms were used for production.
Before assembling the gadget, inspect the bearing. To do this, remove the anthers and wash them. This completes the work on making the turntable.

Luminous

1. The most interesting toys come from making them yourself from absolutely incredible materials. Make a glowing fitjet - all you need to do is buy a phosphor online in China.
2. Dilute 3 grams of powder in 7 ml of glycerin to obtain a luminous liquid.
3. Then you can use the described method for making the central part from wood. Just use glass bulbs from fluorescent lamp starters instead of sleeves.
4. We pump liquid into the flasks using a syringe and glue them into the prepared holes.

It turns out to be a beautiful toy that you can play with and surprise your friends in the dark.

Made from chocolate

Any material you can imagine is suitable for making a spinner. It can be made from wax, paraffin candles, ice and even made edible.
A very original gadget is made from chocolate.

I played and got tired of it and ate it.

To make such a toy you will need:

• Make a mold for filling;
• Bearing;
• Candies such as confetti or jelly beans;
• Cardboard, for form and glue;
• Wax paper;
• Scissors with pencil;
• A piece of foil from a chocolate bar and the chocolate itself;
• Glue.

Video showing how to make an edible chocolate spinner

1. A drawing is taken from which the twist template is cut out. A strip slightly larger than the thickness of the bearing is cut out of paper and glued along the perimeter of the template.
2. Then we completely wrap the prepared bearing in foil and place it in the center of our mold, having previously placed wax paper on the bottom of the mold. We place candies along the edges of the petals (you can do without candies, this is for beauty). All that remains is to dissolve the chocolate in a water bath.
3. As soon as the chocolate becomes liquid, it is poured into the mold using a pastry syringe. It is necessary to pour very carefully so as not to move the installed parts.
4. After filling everything with chocolate, place the toy in the refrigerator. After some time, the chocolate will harden and can be removed from the refrigerator.
5. All that remains is to remove the product from the mold, free the bearing from the foil, clean the edges - and you can use it. When you get tired of it, you just have to eat it.
6. The entire manufacturing process can be filmed and shown to friends or posted on the Internet on your page.
7. In a similar way, a fitjet can be made at home from any hardening material: stearin, wax, gelatin, and from colored wax candles you can get a multi-colored spinner body.

They differ in the number and shape of the petals. The shape can be completely different: from geometric shapes to exotic and futuristic shapes. They differ in the use of bearings: one, three, four or no bearing at all. When choosing a spinner, follow these rules:

• The gadget should rotate smoothly and without noticeable beats.
• The quality of workmanship should not cause any complaints.
• The material from which the toy is made must be of high quality.
• The rotation is quite long: the longer the better.

Some users advise choosing products based on their preferences. If you like the item in terms of design, color, or manufacturing, buy it, but the rotation time is secondary.
So we see that no one can give an unambiguous recommendation. Focus on your own feelings.
To ensure that the pinwheel serves for a long time and is always attractive, follow the recommendations: Keep the toy away from mechanical damage
, falling from a height onto a hard surface;
If the product is made of plastic, it is not recommended to disassemble it, especially the button - the plastic parts can be damaged; they are glued or pressed in very tightly;