Help on Tele2, tariffs, questions

Using various weights for walk-behind tractors, owners of land plots can significantly increase the functionality and expand the range of use of these machines. Walk-behind tractors and walk-behind cultivators are indispensable assistants when carrying out earthworks on areas of large and small areas, transporting goods over short distances. With their help, less time and effort is spent on soil cultivation. However, in some cases, even the most modern and expensive equipment, such as the domestic Neva walk-behind tractor, cannot cope with certain tasks. When raising virgin soil, working on slopes and in damp earth the wheels of the unit slip because it does not have enough of its own mass for reliable traction. In order to weigh down the car, various factory-made and home-made weights are used.

Since an agricultural equipment store may be located at a considerable distance from a summer cottage, many property owners make weighting devices themselves. Sometimes homemade weights for a walk-behind tractor are installed in order to balance its center of gravity. This modification is required when carrying out planting work or using an adapter. Let's look at how you can make weights for a walk-behind tractor with your own hands, using the tools and equipment that you have at hand.

List of tools and equipment

As a rule, on every summer cottage there is a sufficient quantity metal products and a set of devices for a wide range of work.

In order to make wheel weights for a walk-behind tractor with your own hands, you will need the following tools and materials:

• roulette;
• welding machine;
• building level;
• grinder with discs for cutting and grinding metal;
• electric drill with a set of drills;
• a small steel or aluminum barrel with a screw-on lid;
• barbell plates weighing 5, 10, 20 kg;
• steel corner 30-50 mm;
• paint brush;
• car paint.

Weight the walk-behind tractor so that you can always quickly dismantle attached attachments. They will not be required when mowing grass and performing other work that does not require strong adhesion to the ground. In such cases, excess cargo will interfere and lead to excessive fuel consumption.

Weighting the wheels of the unit

The most common way to make a car heavier is to install additional weights on the wheels. The rims, axle and hub are strong enough to support up to 50kg of added weight. You can make weights for the walk-behind tractor Neva, Ugra, Cascade, Rusich, Nadezhda, Forza, Salyut, Krot in various ways.

The first method is to make a load from hollow steel barrels.

This is the simplest and affordable option, which does not require serious financial costs.

The work is carried out in the following sequence:

1. The metal barrel is cut into 3 parts by a grinder (the bottom and top should be 10-15 cm high - depending on the size of the walk-behind tractor).
2. The bottom and top parts are welded at the cut site. The seam can be reinforced with a strip of metal.
3. 4-6 through holes for bolts are drilled in the workpiece, and if necessary, they are reinforced with steel washers.
4. Hollow tanks are secured to wheel rims using long bolts and nuts.
5. Sand and granite chips or other bulk material. Water is added to increase its density.
6. The lid is screwed on.

This weighted unit can be used in the most extreme conditions. When the additional weight is no longer needed, it can be quickly removed, emptied and stored. It is advisable to always have pads with your walk-behind tractor in order to quickly make it heavier when the need arises.

The second method is the manufacture of removable steel weights. To do this you will need a hexagonal iron rod, the size of which coincides with the hole in the axis of the unit chassis. Additionally, you need to have 2 20-kilogram weight plates.

Subsequent work consists of the following stages:

1. 2 pieces of 5-6 cm long are cut from the profile.
2. The profile pieces are welded to the discs in the place of the hole for the neck.
3. In the axis of the unit and in the profile are made through holes for cotter pins.
4. The made weights cling to the walk-behind tractor and are secured with cotter pins.

If there is a need to further increase the weight of the wheel, you can weld 10-kilogram barbells to the linings. To give the wheel an aesthetic appearance, old clutch baskets from VAZ are welded to the weights. Paint is applied over the basket, the color of which suits the owner most.

The third way to weight the wheels is to make an additional load from reinforced concrete. These loads are made in this way:

1. A flask is made from sand or gypsum, its walls and bottom are strengthened cement mortar or liquid glass.
2. A volumetric frame is made from a sheet of steel and reinforcement, the center of which is a solid hexagon with a pre-fabricated drilled hole under the cotter pin.
3. Heavy concrete is made using fine granite crushed stone and lead filler.
4. The solution is poured into the mold, thoroughly compacted and leveled.
5. After the concrete gains strength, its surface is treated with impregnation and painted.

To add additional weight to the concrete attachments, it is recommended to leave the embeds with threads.

Weighting the walk-behind tractor body

In some cases, the weight of the wheel weights is not enough. Since it is not recommended to overload the axle, weight is added to the unit body. This can be done different ways. The most the best option is to secure the removable steel frame directly on the walk-behind tractor. The basis can be a frame, a gearbox or a niche for installing a battery.

The increase in body mass is carried out in the following sequence:

1. Determination of the center of gravity of the unit. Creating a frame project.
2. Welding bolts with a diameter of 12 mm and a length of at least 10 cm to the gearshift housing and to the steering wheel bracket of the walk-behind tractor.
3. Welding a frame from a corner. Making mounting holes for bolts in it.
4. Fitting the frame to the frame. Drilling holes in it corresponding in location to the holes on the frame.
5. Cleaning the frame from dirt and rust. Painting the product and fixing it to the frame.
6. Making cargo to fit the size of the frame. You can find the necessary parts at a scrap metal collection point, where the material will be immediately cut into fragments of the required size.

The weights are secured to the walk-behind tractor using welding or bolted connections. The second option takes longer to implement, but is more practical in the long term. The need to remove additional weight arises when transporting the unit or performing light work, when excess pressure on the ground is contraindicated.

Conclusion on the topic

Today there are a huge number of different devices for weighting the wheels and frames of walk-behind tractors on sale. They are convenient, but have a rather impressive cost.

Independent work will allow you not only to save a good amount, but also to produce a load of the required weight, configuration, and give it suitable color and additional functionality. Thus, a fixed basket and welded bolts can be used to transport oil, fuel and clothing. Additional fasteners are useful for harvesting, storing tools, spare parts, and fishing equipment when traveling to a pond. Creativity to the issue of making walk-behind tractors heavier will significantly expand the capabilities of these irreplaceable machines.

Do you need weights on a walk-behind tractor?

Plowing large gardens by hand is very difficult, and hiring a tractor or workers may not be financially viable. In such cases an indispensable assistant The walk-behind tractor will become a convenient and practical piece of equipment. It is very convenient for them to work on virtually any terrain; trailed parts expand the possibilities. But sometimes it's hard to achieve maximum efficiency in operation due to the low weight of the walk-behind tractor itself - the unit only plows thin layer soil, slips. It is not difficult to increase the efficiency - just attach weights to the wheels of the walk-behind tractor.

How to make a walk-behind tractor heavier and why is it necessary?

The small weight of the walk-behind tractor increases maneuverability, but, as a rule, the quality of tillage suffers. But this problem can be easily mitigated if you install weights on the wheels of the walk-behind tractor, thereby increasing the weight of the mechanism. It will stop bouncing on bumps and holes, will become more stable, the wheels will not slip, and the entire vehicle will move more smoothly.

Such simple devices can be purchased in specialized agricultural stores, but for most summer residents this may not be financially profitable. But there is a way out - you can make a weighting agent for a walk-behind tractor with your own hands. All you need is some materials, your desire and a little time.

Weighing the walk-behind tractor can be done in two ways:

1. make weights for the walk-behind tractor and attach them to the frame
2. or make the wheels heavier.

Let's consider both options.

First option

In the first case, an additional frame is welded to the walk-behind tractor body, but in such a way that there is unobstructed access to the engine (after all, you will have to periodically change the oil, etc.). A metal pancake with an approximate weight of 30-40 kg is bolted onto the installed frame. If necessary, this weighting material for the walk-behind tractor can be removed.

Second option

Before you make wheel weights for a walk-behind tractor with your own hands, you need to prepare necessary materials. So, you will need:

• weight 5 kg – 2 pcs;
• metal pancake – 2 pcs;
• VAZ car clutch basket – 2 pcs;
• walk-behind cotter pin – 2 pcs;
• hexagonal piece of cast profile.

If you don’t have everything from the list below at home, you can look at the metal collection point - there is a 99.99% chance that you will find the missing items there.

In addition, do not forget to prepare a welding machine (1), an angle grinder (2) and a drill (3). You can't do without these electrical appliances.


First, you will have to use a grinder to cut 2 pieces of about 5 cm each from the hexagon - then you need to drill holes in them for the cotter pins. Each piece is then attached to the pancake by welding. The pancake, in turn, is welded to the flywheel around its entire circumference. Lastly, a weight is added to all this - also by welding. We do the same with the second set of items.

The final step is to make holes for the cotter pin in the inner axis of the wheels, then it will be possible to attach a weighting agent for the walk-behind tractor that you made yourself. The cotter pin can be easily secured with steel wire.

Some models are equipped with lugs - specific studded wheels. They can be either basic, that is, attached directly to the axle, or removable - put on top of the main support wheels and fixed with special attachments. On such models it is very convenient to cultivate land on slopes, but as practice shows, weights for the walk-behind tractor for lugs also have to be installed.

Now you know how to weight your walk-behind tractor with your own hands. Such modernization options are suitable for walk-behind tractors "Neva", "Salyut", "MB-1", "Mole", "Oka" and others.

How to teach a lightweight Chinese walk-behind tractor to plow?

The brand new unit, without plowing even 10 m, got stuck: the wheels were slipping, the lugs were digging into the soil. What to do?

STARTED TO LOOK FOR THE REASON WHY THE MOTOR-BLOCK STICKS

Plow?

Adjusted correctly.

The walk-behind tractor has enough power, even though it is gasoline. Large 5/12 wheels provide excellent traction... There is only one reason left - the low weight of the walk-behind tractor (according to the passport - 125 kg).

I started looking for a way to fix this problem.

It turns out there are several methods.

• 1. Make a weighting mold in sand and pour molten lead into it (too difficult).
• 2. Make weights from a mixture of concrete and crushed stone (cheap, but short-lived).
• 3. Fill a container with sand and hang it on a walk-behind tractor (unreliable, inconvenient).

What if you increase the weight of the walk-behind tractor using metal weights?

I went to a collection point for ferrous metals, where I found several weights of different weights from old industrial scales from the times of the USSR, and a couple of weights from a sports barbell weighing 10 kg. two clutch baskets with flywheels from VAZ 2101 -2107 vehicles and one counterweight for 25 kg from a tractor.

In a local shop with spare parts for walk-behind tractors, I bought an additional section of cutters for the walk-behind tractor - a faceted tube with a diameter of 32 mm and a length of 15-20 cm, on which four cutter blades are installed. Now I had all the details of the future weighting materials collected.

First of all, I installed a couple of 10-kilogram weights from the scales on the “back” of the walk-behind tractor (that is, on the gearbox, where in theory the battery should be installed if it were included in the kit). Giri pre-welded together. I attached them to the gearbox housing with two 12 mm bolts. Using a second pair of 12 mm bolts, I secured the same weights to the steering wheel bracket of the walk-behind tractor.

Then, from a 40/40 mm corner, I welded a frame for a 25-kilogram weight from a tractor. It looks like a pancake with a diameter of 30 cm and a thickness of 8 cm, in the middle of which there is a slot in the shape of the letter T. He placed the weight in a frame and tightened it with a nut so that it would not fall during the work. The structure was installed on top of the weights. The weight of the walk-behind tractor has increased by 48 kg!

NEXT STAGE – WEIGHTING THE WHEELS OF THE MOTOR BLOCK

For each wheel I welded a load weighing 27 kg each. Here we needed plates from the bar (they were welded to the clutch basket by VAZ, which also weighs 10 kg). Outside this pyramid I welded a 5-kilogram cast-iron weight from an industrial scale.

For welding I used cast iron electrodes.

After that, I used a grinder to cut off the 32nd hexagon from the additional section I bought from the cutters. Its length is 12 cm and its weight is 2 kg. The hexagon was quite enough to attach the weighting material to the axle shaft of the walk-behind tractor using a cotter pin.

WITH inside Welded a hexagon in the center of the weighting material, directly onto the pancake. I made the second weight for the wheel in the same way. Now the walk-behind tractor begins to weigh 102 kg more.

The last remaining weight of 10 kg was installed as a counterweight on the front bumper pipe of the walk-behind tractor. I first made a frame for this weight (by the way, also from a scale). I used metal tape for it. cutting it out from an old computer system case. I inserted the tape into guides made of 50/50 mm profiled pipe welded to the bottom of the walk-behind tractor frame. That's it, the finale! Now the walk-behind tractor (together with the ones installed on it additional cargo) began to weigh 237 kg. I decided to try it out in the field.

The work was not in vain. The unit walked confidently, without feeling the load, and this despite the fact that the plow was buried 20 cm. So now I can confidently say. that any light and medium-class walk-behind tractor simply needs to be loaded with additional weight, be it a container with sand or homemade weighting agent made of concrete.

A few years later, I changed the gasoline walk-behind tractor to a new one with a 9 horsepower diesel engine. Despite the fact that he weighed 170 kg, he also had to be weighed down. Some homemade weights, however, had to be slightly adapted to take into account the new model, but the principle of the location of the weights remained the same. Except that now I have installed a load weighing 19 kg on the front and 27 kg on the wheels. On top of the gearbox was a battery weighing 12 kg.

For information. Stores also sell weights for walk-behind tractors, but they are prohibitively expensive. For example, for a sinker weighing 20 kg you need to pay 2500 rubles! For what? After all, you can do all this yourself!

So I would like to advise all walk-behind tractor owners and people who just want to acquire walk-behind tractors: buy them, don’t be afraid, everything can be fixed! And even what at first glance seems incorrigible to you. Nowadays you have to put your hands to everything, otherwise modern technology will simply refuse to work.

337.5 rub.

★★ ★★ ★★ ★★ ★★ (0.00) | Orders (0)

Motoblocks belong to the category of universal mini-equipment. Designed to perform any agricultural work on small areas land. Thanks to a wide range attachments, with their help you can plow, loosen the ground, harrow, hill up bushes, sow seeds, plant and dig up potatoes, transport goods, etc. However, not all walk-behind tractors move easily on the ground: the lightest ones slip. To prevent this from happening, manufacturers have provided special weights for the walk-behind tractor.

Features of application

Such devices are most often used on hillers and plows. An increase in the weight of the walk-behind tractor also increases the traction force. This contributes to more efficient soil cultivation. In addition, the weight of the device simplifies work on slopes and hard soils. Using these devices, you can quickly balance the weight of the walk-behind tractor and attachments. This not only simplifies the management of mini-equipment, but also increases the efficiency and quality of work.

Making your own weights

These devices are attached to the wheels or body of the walk-behind tractor. They are also designed for lugs. Weighting agents are easy to make with your own hands, without the help of specialists.
To create them, you can use any heavy objects:

• five-kilogram disc weights;
• ten-kilogram discs from a sports bar;
• hexagonal profile;
• automobile clutch baskets.

When making weights for a walk-behind tractor, it is impossible to do without the following tools:

• welding machine;
• grinders with cutting discs;
• electric drills;
• paints.

First, two sections of 5 centimeters each are taken from the hexagonal profile. Then holes are drilled in them for the cotter pins. Next, the discs from the rod are attached to the sections, and the clutch baskets are welded to the discs. At the next stage, five-kilogram weights are attached to the baskets. Upon completion of all work, the entire structure can be coated with polymer protective paint. Thanks to this coating, the weighting material for the walk-behind tractor will retain its aesthetic appearance for several years. Thus, the weight of the walk-behind tractor increases by 50 kg.

When should you add more weight?

If weights for walk-behind tractor wheels do not give the expected result, then the mini-equipment should be made even heavier. To do this, a load is added to the frame or body. A pre-prepared frame is attached to the frame, and a disc from a barbell weighing 25 kg is welded to it. Naturally, heavy objects are indicated here as an example. In addition, discs and weights round shape best suited to weighted wheels. However, you can use other heavy objects.

Which design to choose and how to mount?

The weights are attached to the frame using bolts, although they can also be welded. The first option is more acceptable because, if necessary, the load can be quickly removed. This is usually required when transporting a walk-behind tractor. It is better to give this design the shape of a box. Heavy items can be purchased at low prices at metal collection points. There is another option for purchasing metal for a weighting agent - this is the used auto parts market.

Those who do not have a welding machine, and who do not want to make weights on their own, can purchase them in a specialized store or on a market selling walk-behind tractors. If you make such devices at home, you can save a significant part Money. Even an untrained person with minimal experience can handle such a simple job.