Help on Tele2, tariffs, questions

There is always something that needs to be fixed in the house. It could be a leaky faucet, a loose shelf, or a broken chair. Of course, for each of these actions a man needs special tool. Ultimately, this leads to the accumulation a large number of screws, hammers, wrenches and etc.

Where to put all the tools so that they are in one place and do not attract attention? Certainly, the best option will be the presence of a box for tools, which can be purchased in a store or made with your own hands.

What types of boxes are there?

Construction stores offer not only materials for repairs, but also special boxes in which it is convenient to store tools in compact form. If you don’t have the time or desire to make such a box yourself, you can easily purchase it at finished form. However, it would be much better to do it yourself.

A homemade box will be direct proof that a man is a jack of all trades and can easily cope with any task.

Before purchasing or making one at home, you should clearly determine the type of box that will be most useful. For this purpose, its purpose is determined.

Irregular use does not imply the presence of a sophisticated design. In this case, a simple box-box with one section is much better suited. There is another type - an organizer box. It is more suitable for men who constantly exercise repair work, whether at home or in the workplace.

To make the right choice, you need to rely on personal preferences. The choice of box depends on the man himself and his ability and desire to make something.

How to make a box with your own hands step by step?

If you decide to make a box yourself, then you need to have step-by-step instructions, including a sequence of actions. It will allow you to accurately understand how to make a tool box without any special financial and labor costs. Let's define the main stages of work:

Defining a Plan

This stage is very important, since the calculations obtained and the diagrams made will allow us to draw up a prototype of the structure. If a mistake or inaccuracy is made somewhere, the final product may differ greatly from what was intended.

To depict a box in the form of a drawing, use paper and pencil or a special program on a computer.

Materials for work

You should clearly understand what materials will be used to create the future tool box. They are divided into mandatory and optional.

The latter depend on the specific case, and the mandatory group includes measuring devices, fasteners, a hammer, a hacksaw, etc.

Manufacturing process

The main work that will determine the outcome occurs precisely at this stage.

Manufacturing work

To understand the specifics of how to make a structure yourself, we will give a simple example, which is shown in the photo of a tool box. The design is a box-box, which has a special handle for moving.

What is this box made of? Plywood, plastic or metal materials. Their choice again depends on the personal preferences of the master. As a rule, most people use conifers trees for making. It's all about their availability, high quality and ease of processing.

Let's look at the process of making a box box step by step:

• After a drawing is made on paper or a computer, it is transferred to the material that will serve as the basis for the design. That is, details are drawn on wood, plastic or metal with a pencil and then cut out with a hacksaw.
• The main elements of the box: walls (4 pcs.), bottom. The most simple box for instruments may not contain a cover.
• Once all the parts are cut out, they are connected with glue and wait for drying.
• After a few hours, when the glue has completely dried, the joints are additionally fastened with nails or self-tapping screws.
• Installation of the handle. A wooden slats are suitable for this.

Having completed these simple steps, you can get a great DIY toolbox.

The finished structure is additionally coated with a layer of varnish to give it a beautiful shine. appearance and protect the material from liquid ingress.

The presented box-box is considered the simplest, but at the same time very convenient. Following step by step instructions, even a beginner can make such a box with his own hands.

Of course, later it is possible to make a more improved and complex model, but for the first experiment it is impossible would be better suited simple box.

DIY tool box photo

As soon as the owner of the house decides that it’s time to hang up the flower shelf that his wife has been reminding him so persistently for two months, it turns out that the necessary tools have disappeared somewhere. The situation is familiar, because usually hand tools, all these keys, hammers, screwdrivers, are stored so as not to be seen. We don’t use tools every day, of course, but the storage system needs to be organized correctly so that later we don’t have to look for, for example, a 12 key.

Storage options

Let's immediately decide that we will talk specifically about a workshop, which can be set up in a garage, a separate shed, summer kitchen, on a fairly spacious loggia or balcony. There are usually not many tools in the apartment, and the existing screwdrivers, hammer and pliers can be put in a specially designated box or bag, which can take place on the mezzanine or in the hallway.

If there are noticeably more hand tools, they need their own separate corner, in which you will have to put things in order. The main condition is that the place where the tools are stored must be dry, because metal parts They don't like moisture.

There are many benefits to a well-designed storage system. You will always know exactly what is and where it is, you won’t have to look for anything. If the tools are always in their place, you will remember in time that a month ago you gave your neighbor a nail puller that he needed for literally an hour. In addition, correctly positioned tools take up less space in the workshop, freeing up space for work.

First of all, you should decide whether you will buy ready-made shelves for tools, a metal mobile cabinet with drawers, or set up a workshop with your own hands from scratch. Let us immediately note that ready-made systems storage for hand tools They don’t always fit 100%; they often have to be remade to suit you.

Let's look at a few ideas independent organization storage of hand tools in the workshop.

1. First of all, you should take care of the little things: nails, screws, bolts, which tend to get lost and scatter throughout the room. For their storage, you can adapt ordinary plastic bottles with the necks cut off, you can immediately see what is where. Small plastic boxes are also suitable, which are best labeled, noting that, for example, there are nails of a certain size here. It is convenient to place such containers for storing small items on a shelf above the desktop so as not to clutter it. And here glass jars Should not be used in a workshop. There are too many heavy ones here metal objects, which can accidentally touch such a fragile container.

2. Magnet. Real craftsmen usually have a large magnet on their work table, to which small metal tools can be successfully attached. Now there are special magnetic surfaces and holders on which you can conveniently and simply store many tools and parts.

3. Plywood panel - the choice of old-school craftsmen. From pieces of bars on such a shield you can create an entire storage system that will not take up much space and will allow you to place almost all hand tools. The costs for such storage areas are minimal, and everything will be done according to the needs of the master.

4. You can also buy ready-made a metal sheet with holes for tool holders. However, you can do this yourself. On ordinary nails or self-tapping screws, saws, keys, and other tools with special holes in the handles are hung in the required order.

5. It is convenient to allocate separate storage for screwdrivers, for example, a regular school stand for pencils and pens.

6. You can adapt it to a small hand tool plastic boxes with compartments that are usually used in the kitchen for forks and spoons.

7. If you don’t really want to build panels and make shelves, you can move an old sideboard or buffet to the garage workshop. It has a lot of shelves and drawers where many tools can fit. The main thing is to lay everything out yourself so that you know exactly where the garden tools are stored and where the carpentry tools are stored.

8. For drills and bits of a certain size, it is better to buy a ready-made cradle - an insert with tools. Or drill holes in wooden beam, where the drills will go. And sign - 3, 4.5, 9 and so on, so you know right away right size cutting tool.

9. When arranging storage areas in the workshop, you should take care of safety, especially if small children can get into the room. Piercing and cutting tools in this case, it is better to hang it higher on the wall, and keep chemical liquids securely in a cabinet with lockable doors.

10. A free-standing rack with holders for long handles of shovels and hoes is perfect for garden hand tools. Of course, you can just lean them against the wall, but remember the proverb about the same rake?

We state that organizing a workshop is not so difficult, it’s enough simple ideas a lot of. Just prepare yourself for the fact that one time you will have to tinker in the garage a little longer and make an effort, but then there will always be strict order in your workshop and there will definitely be no problems with finding a “cross” screwdriver.

Any owner has a lot various instruments and fasteners. Sometimes all this is stored in a separate box, on or in, neatly folded or piled in a heap. Often, when starting or when it is necessary to tighten the nuts, you have to search for a long time for the right wrench, screwdriver or pliers. A multifunctional tool box with compartments for wrenches, drills, fasteners, etc. will help avoid confusion. You can buy it in a store or make it yourself. In today's review by the editors of the site, we will look at the types of boxes for, what you can make from and how to assemble them with your own hands.

Tool boxes differ in the material used and the type of items stored. According to the material used they can be:

• wooden. Wood is an affordable and easy to process material. To make the box, either durable multi-layer plywood with a thickness of 10, 16 or 18 mm is used. The complexity of the design depends on the wishes and skills of the master;
• metal. Steel or iron structures are quite heavy, but they are strong and durable. Lighter boxes are made of aluminum;
• plastic. These boxes are lightweight, durable, convenient and have a modern design.

The boxes also differ in the type of tool stored in them and are:

1. Unprofessional. They are a design with several compartments. They use bags or cases of different sizes.
2. Power tools. Special boxes used for storing drills, etc. As a rule, such boxes are equipped with a large compartment for certain equipment and several small ones for additional equipment.
3. Professional. Most craftsmen prefer this particular type of tool box, since they have separate seats for a certain type of equipment.
4. Universal. Boxes of this type have a large number of compartments and are used to store a wide variety of items. There are tool boxes with removable partitions, which allows you to rebuild inner space at our own discretion.

Design of tool boxes

Tool boxes are also divided by design. And here it is not the shape of the box that is meant, but the opening option and the presence of auxiliary compartments. The following designs are distinguished:

• case. Represents a box rectangular shape with a handle. They usually have several compartments and removable partitions, allowing you to plan the interior space as you wish. Such designs are small in size and weight;
• container. Enough spacious drawer with partitions and separate containers that fold according to the matryoshka principle. Sections can be folded up and to the sides, and the box itself is often equipped with wheels for easy transportation;
• multibox. This is a vertically positioned design in which the drawers and hardware are pulled out like in a traditional linen chest of drawers.

Requirements for tool boxes

When choosing a tool box in a store or deciding to make it yourself, you need to take into account some of the requirements for its design:

1. The bottom of the box or container must be sufficiently thick and durable, since this is where the bulk of the contents fall.
2. When the box is fully loaded and lifted, its walls should not be deformed.
3. It is recommended to choose a structure made of fire-resistant material.
4. There should be no gaps in the box so that dust and dirt do not get inside and contaminate what is stored in it.

For your information! If you decide to purchase a tool box in a store, then give preference multifunctional models with separate compartments and a closed insert organizer for small parts and fasteners.

Related article:

: what you should definitely have on hand. Read our publication for the main differences between similar tools, advice and recommendations from experts.

How to Make a Simple Open Tool Box

Inexpensive wood is most often used to make a tool box, especially if this is your first experience. We suggest making the simplest box without a lid. Its advantage is that it can fit and carry almost any size.

To make a simple tool box you will need a board, wood glue, self-tapping screws, or a drill and a hacksaw. The simplest box consists of:

• long walls (front and back) – 2 pcs.;
• narrow and high sidewalls (the height of the front and back walls should be greater, since the handle will be attached to them) - 2 pcs.;
• bottom (from a thick board) – 1 pc.;
• handles (square or round bar, galvanized, chrome-plated or aluminum tube) - 1 PC.

Assemble all parts into a single structure using wood glue and. Pay special attention to how the handle is secured. This box can be supplemented internal partitions(removable or stationary), and also make a lid. Dimensions can be very different: it all depends on your needs and desires. Photos of the assembly are shown below.

Tool box made of plywood

First of all, you need to make a drawing and calculations and transfer them to plywood. Carefully mark, cut out parts along the intended contours and make grooves, thanks to which the structure will be more durable. All cuts must be processed sandpaper.

Next, the box is assembled. Glue is used to connect the parts. First, the frame is glued together (to make the work easier, you can use clamps or rubber rings). The handle is made from MDF and carefully processed or used from an old case or suitcase. To keep everything in its place in the box, you can make small compartments. One part of the box is reserved for a compartment for storing screwdrivers.

Related article:

: the best home gadgets that any self-respecting home owner should have at hand are in our publication.

Wooden organizer with lid

This design is excellent for storing equipment, and is also durable, reliable and solid in appearance. To make it you will need:

• board;
• wood glue;
• metal corner pads – 8 pcs.;
• pen;
• self-tapping screws;
• furniture hinges – 2 pcs. or piano loop;
• latches-locks – 2 pcs.;
• drill;
• clamps;
• sandpaper.

Mark the parts on the boards according to the dimensions given below.

Detailing

Name	Drawing number and quantity
Main drawer
Front Panel	No. 1 – 1 pc.
Back panel	No. 2 – 1 pc.
Bottom	No. 3 – 1 pc.
Support rail	No. 5 – 2 pcs.
Side	No. 6 – 2 pcs.
Lid
Top	No. 4 – 1 pc.
Front and back wall	No. 7 – 2 pcs.
Side	No. 8 – 2 pcs.
Removable tray
Pen	No. 9 – 1 pc.
Bottom	No. 10 – 1 pc.
Long sides	No. 11 – 2 pcs.
Short sides	No. 12 – 2 pcs.
Partition	No. 13 – 2 pcs.

Assembling the tool box

First of all, we assemble the box body and lid. To make it easier, use clamps and corner ties. The parts are connected using a special glue for carpentry. After the glue has dried, we drill holes, countersink them and carry out additional fixation with self-tapping screws.

Next, we assemble the removable tray in the same way, install partitions and additionally secure everything with self-tapping screws. Inside the box body, we install two strips on the short walls, spaced 300 mm from the top edge.

Processing again instrumental box fine abrasive paper to remove the slightest burrs. Cover the structure protective composition and let dry. If, after such treatment, raised wood fibers are found, then it is necessary to sand the box again and repeat the finishing.

To complete the assembly, you need to connect the cover to the body using hinges and self-tapping screws. Install the handle and latches-locks, as well as protective metal covers on all corners of the drawer. The box is ready, and now it can be filled with the necessary equipment and fasteners.

A few words in conclusion

A tool box is a must-have item for any craftsman. You can buy it at any hardware store or make it yourself according to your needs. We hope that the above examples of making tool boxes will be useful to you. if you have own ideas, then share them in the comment form.

Almost every man has a set of tools in his home or garage. Therefore, it is worth keeping them in perfect order. He will tell you how best to do this new review. Surely everyone will be able to find in it examples of organizing storage space that interest him.

1. Plastic cans

Trimmed canisters are perfect for storing nails, screws, bolts and nuts. And in order not to dig around for a long time in search of what you need, it is better to label the containers.

2. Wooden shelf

Narrow wooden shelf with holes - a great place to store screwdrivers.

3. Stand

To prevent pliers from being scattered throughout the garage, make a special one for them. wooden stand.

4. Railing

A thin metal rod is perfect for storage paint brushes in limbo.

5. Individual cells

From the leftovers PVC pipes You can make convenient cells for careful storage of small power tools.

6. Wooden shelving

Homemade wooden rack for storing wrenches will allow you to forever forget about the clutter and tedious search for the right tool.

7. Open locker

An open wooden cabinet is ideal for storage. aerosol paints, which are most often randomly scattered in the garage.

8. Mobile stand

A small stand on wheels is perfect for storing hand tools. This rack is very compact and will always allow you to have the right tool at hand.

9. Wooden stand

A stylish wooden stand with a shelf, which is suitable for storing many of the most different instruments. Such a product will not only help organize hand tools, but will also become a real decoration for a man’s monastery.

10. Homemade stand

An unnecessary pallet can be turned into convenient stand for storing garden tools, which often take up a lot of space in the garage.

11. Hanger

Simple wooden block with metal hooks will forever solve the problem of storing power tools.

12. Clothes hangers

Simple manipulations with an ordinary clothes hanger will turn it into a convenient organizer for storing electrical tape and adhesive tape.

13. Storage system

Forks, shovels, rakes, etc. garden tools not very stable and also takes up a lot of space in the garage. Reliable wooden hooks on the walls will help you correctly place garden tools along the walls of your garage or shed.

14. Folding table

Homemade folding table made of wood and a wall rack for storing hand tools is an amazing idea for small garage owners.

15. Glass jars

Ordinary glass jars with metal lids are perfect for storing various small items. For greater convenience and reliability, the lids of the cans should be screwed to the shelves.

16. Vertical storage

The average garage looks quite cluttered. Proper organization of storage systems will help solve this problem. Instead of another closet, equip the walls with various shelves and hooks, which will allow you to neatly place a variety of things, from tools to a huge boat and bicycles.

17. Magnets

Magnetic tape or individual small magnets - great idea for storing bits for screwdrivers, drills and other small metal parts.

Continuing the topic, we’ll tell you about anywhere.

Every man will agree that a high-quality and multifunctional tool box is an almost irreplaceable thing in the household. Many craftsmen prefer to buy a ready-made box in the nearest store, where a wide range is available. But such a device can be made independently, in accordance with personal wishes. Moreover, the manufacturing process itself is not considered difficult, so even a beginner can cope with this task.

Classification of tool boxes

There are several basic criteria due to which multifunctional products can be divided into several main groups.

According to the material from which the body is made:

By type of stored instruments:

Design of modern boxes

When talking about the design of such boxes, we do not mean their shape, but the method of opening and the presence of auxiliary sections. The following designs are considered standard today:

Making a box from plywood

To make a tool box with your own hands from plywood, you will need the following tools and materials:

Before you start manufacturing, you need to carefully work out the design of the future product (the drawing can be made on a computer or on plain paper). Produced necessary calculations, the main dimensions are fixed. After that all marks must be transferred to a sheet of plywood. This can be done using a regular ruler, tape measure, marker or even a pencil. All blanks for the future box are cut along the intended lines. It is also necessary to mark all the grooves and cut them on the blanks. Irregularities formed during the work process can be processed with a chisel. It is thanks to the grooves that the final design of the box will be stronger and more durable.

The next stage is the assembly of the entire structure. To glue small parts, use high-quality wood glue. The main sides of the box are also glued together. To improve the result, they need to be pressed tightly together. It is best to use a special rubber strip for this. It cannot be removed until the glue has completely dried. The corners on the doors need to be rounded.

A convenient handle for a tool box can be made from MDF. Initially, the layout is drawn directly on the wood and only then cut out. When the handle is ready, the surface must be processed. It is attached using wood glue and screws. If you don’t want to make your own handle, then you can purchase it at hardware store. Main criterion the right choice- high strength and reliability. Now you need to attach the outer lid of the drawer and door. All parts are put in place, and then the areas for attaching the hinges are marked with a pencil.

To organize the drawer, you can make small compartments. All components are cut out according to the same principle as the box. Grooves are made and glued together. On one side of the box you can make a special compartment for storing screwdrivers. The most convenient option is where this function is performed by special inserts with slots made of plywood. Velcro is applied to the other side of the drawer to store cables and extension cords.

Wooden box manufacturing technology

This option is considered a classic of carpentry. Drawings of this portable storage facility were published in magazines 50 years ago. For the manufacture of you will need a high-quality board with a thickness of 10 to 20 mm, as well as a hacksaw for wood. Thanks to the simple manufacturing technology, many craftsmen still choose this option.

IN classic design there are no separate compartments or special multifunctional devices. The final product will look like a neat, deep box with a comfortable handle along its entire length. This shape of the handle has a practical purpose. After all, if the weight of the tools used is unevenly distributed, then you can always find the center of gravity point.

A practical addition could be an insert section with its own handle, the height of which occupies 50% of the entire drawer. This insert can be used for small tools(awl, screwdrivers, small keys), as well as Supplies(screwdriver bits, electrical tape, drills). Any type of wood can be used to make it.

Universal case made from a plastic canister

If you want to make a tool box with your own hands, but don’t have a sheet of plywood, then you can use regular plastic canister. To work you will need:

• Hacksaw.
• Plastic container.
• Fastening elements.

The canister used must be rectangular in shape with a comfortable handle, which should be located in the center. In addition, it should be equipped with a screw cap that will be used as a lock.

The process of making the box itself is quite simple. Using a hacksaw, you need to make cuts in the canister. The first cut should fall on the center of the neck and the handle of the container, it is best to remove the stopper, and saw through the top wall. The second cut is made exclusively in the horizontal direction. It is best if it is located in the upper part of the canister, on the end sides. The plastic container itself must be cut from the top wall at a distance of 4 cm, and on the sides at a distance of 3 cm.

When all the cuts are made, the canister can be opened. To do this, you need to bend all the side parts of the top cover with the halves of the handle. In this box you can store various materials for fastening: nails, bolts, screws, nuts. Upper part you need to close it by folding the handles together. This device is secured with a screw cap.

To make the box as strong as possible, on the end walls it is necessary to do additional clearances . Small holes are drilled in the lid itself or in the walls into which hooks are inserted, as well as bolts and nuts.

Metal box for tools

This option is most suitable for experienced locksmiths who have necessary equipment and material. Factory-made metal tool boxes are made from lightweight metals such as aluminum. As a result, the product is as light and durable as possible. But working with aluminum at home is much more difficult.

This option metal box Even a beginner can make it. After all, the most ordinary box and special partitions will be made of metal. Initially, you need to prepare the main material - galvanized steel (0.4 mm thick). The tools you need to prepare are:

• Marking caliper.
• Metal square.
• Ruler.
• Hammer.
• Pliers.
• File.
• Sharpened core or marker.
• Anvil.

Next, drawings and markings are made. You only need to mark those places that will later need to be deleted. Now you can start cutting using metal scissors. After trimming all the excess, you should get a kind of geometric figure (winged rectangle).

Next you need to use an anvil. Tapping with a hammer, gradually bend the edges of the workpiece. It is better not to work in a chaotic manner; all actions must be consistent. First, one side is bent, and then another. To wrap protruding parts, pliers are used.

After these manipulations, you need to go over the entire structure with a hammer to level it. In this case it will be small metal box for storing tools. In the future, you can experiment not only with the sizes, but also with the shapes of such boxes.

Almost every home has some kind of tool. When there are too many of them, you can make your own multifunctional box to store them. Experienced craftsmen They believe that such a box is considered an integral attribute for storing various devices. Such boxes can be stored in the workshop and even taken with you on a long journey.