Help on Tele2, tariffs, questions

Every person dreams of a smooth road. However, not everyone can make their dreams come true. Lack of knowledge about innovative techniques and materials that solve such a problem as a hole in asphalt is main reason Problems. Liquid asphalt company engaged in the production quality materials By modern technologies, offers cost-effective solutions that will make you forget about the bumpy road.

The problem of repairing potholes on the roads

For almost the entire population of Russia, potholes on the roads are a real disaster. It occurs everywhere: on the way to work, on the way to the store. Constant stumbling causes only one desire: to quickly fill the hole in the asphalt or fill it with something. From a human point of view, the most economical method is to fill the hole with a beetle or a solution of sand and cement. This method of solving the problem is short-term, since in the future, the compacted solution is quickly broken by cars constantly passing over it. You can solve the problem without the use of professional labor by using innovative material– liquid asphalt.

The reasons why you should give preference to liquid asphalt are:

• Easy to lay the material.
• Possibility of instant use of the finished consistency.
• Saving Money on renting expensive equipment and purchasing styling tools.
• Possibility of installation asphalt pavement and filling holes with temperature changes and different humidity levels.
• Providing a manufacturer's warranty.
• Long shelf life of the material.

Despite the fact that the cost of the material is not the cheapest, liquid asphalt technology is fully justified. Eventually, road surface faithfully serves for many years, and performance characteristics are high.

Filling potholes with cold asphalt

The liquid asphalt produced by the company is reliable and durable material manufacturing. To use it, you don’t need to look for questions and answers on how to repair a hole in the asphalt with your own hands. The instructions included with the product are simple and understandable to everyone.

The innovation of the mixture lies in its quality characteristics:

• It doesn't need to be heated.
• It is always in a liquid consistency.
• It doesn't harden.
• Easy to roll.
• Can be stored without use for a long time.

By purchasing one package, you can fill a small depression or get rid of cracks in a sidewalk path.

Pothole repair involves the following activities:

• Before patching a hole in the asphalt, you need to clean it of dust and other debris.
• The clean recess is treated with a bitumen mixture that increases the degree of bonding.
• The final stage of filling holes in asphalt is to fill it with liquid asphalt.

Pouring the hole into the recess should be carried out a couple of centimeters above the main surface. After compacting the product, the road surface will be leveled and become ideal.

Summary

If you want to verify the veracity of numerous reviews from grateful customers and clients of the liquid asphalt company, we suggest you start ordering the material right now. Our consultants will provide professional assistance and help you decide on the choice of material. You can contact us by telephone or online. To do this, just visit the official website of the company.

During repairs, it is necessary to use a tar gun, trowels and spatulas, brushes, gloves, knives, tamping and compaction tools. Will also be needed following materials: , asphalt in rolls and asphalt that is created using cold technology. They are sold in hardware stores in the quantities needed by customers.

Methods for repairing potholes and other damage to asphalt

Filling potholes with asphalt mixture is the easiest way to remove minor damage from road surface. There are cold and hot asphalt. The first one can be found in hardware store, and the second - only on order at asphalt concrete plants. In any case, the pothole must first be cleaned and debris and dust removed from it. The edges of the pit should not crumble intensively. The technology using hot asphalt is simple. To do this, the entire hole must be filled with asphalt mixture. It can also be used to seal depressions formed next to curb stones. If a pothole appears in the middle of the road, you will need to deepen it and fill it with mixture so that it protrudes two to three centimeters above the surface. After a few minutes, this layer needs to be leveled and compacted. To do this, you can use not only a roller, but also a special brick press.

With the help of cold asphalt, you can also tidy up potholes and pits that have formed in the yard. By cold we mean ordinary asphalt with the addition of some chemical components. The pothole must be cleared of debris and dust. Using a hammer and chisel, you need to even out the edges. Cold asphalt must be laid in such a way as to create a small hill. Laying asphalt must be done in two stages - fill the hole halfway and compact it tightly, then fill it again and top part. A layer of sand must be applied on top of the poured cold asphalt. Then you need to slowly drive your car through this hill. This will quickly compact the asphalt.

Other methods are used when, along with potholes, there are cracks in the. In these cases, filling with tar is carried out. The surface is cleaned with a stiff brush or a special vacuum cleaner. The crack is immediately filled with tar, or covered a few centimeters with sand, and then with tar. Special pistols are used for it. After fifteen to twenty minutes, the treated surface must be leveled and pressed with a spatula.

Inexpensive rolls of ready-made asphalt are also available. They are very convenient to perform repair work having a small volume. To do this, the roll is unwound and removed. protective layer, the asphalt is laid with the adhesive side on the road surface. Then press firmly for a few seconds. The repair ends here.

Pothole repair small areas up to 7 m2 with cold asphalt

If there is a need to fill holes in areas of no more than 7 m2, experts recommend using a modified asphalt concrete mixture with Canadian Perma-patch concentrate, which is suitable for any weather. Cold asphalt is rarely used in road construction, however, it is constantly evolving and is now ideal for road repairs in all weather conditions. This material copes with temperature environment within -200С - +400С. Still, if the repair is carried out in winter, it is best to warm it up a little before starting installation, that is, keep it in a warm, dry room for several days.

How is the repair carried out?

Repairing potholes that occur on roads is usually accompanied by the following work:

• 1. To begin with, all potholes are treated with special cutters around the perimeter to remove excess parts and level the hole. If several pits are located too close to each other, they are combined into one.
• 2. One processed area (map) should not exceed 5m2. Cutting the edges of the pit is done only vertically to avoid further overflow of the asphalt concrete mixture before it hardens.
• 3. If work is carried out in winter, the pothole must first be cleared of pieces of ice and snow.

When the pothole is treated, it is evenly filled with asphalt concrete mixture. When filling, a layer 2-5 cm thick is laid, so that the mixture rises several centimeters above the main coating. Laying is carried out exclusively in one layer. If the depth of the pothole is greater than usual, first pour out the crushed stone base, compact it and only then lay it asphalt concrete mixture. After laying the mixture, it is compacted using a tamper (often manual, but compaction using a vibrating plate is also possible). The compaction starts from the edges of the card and ends in the center. For greater efficiency, at the end of the compaction, the filled pothole is sprinkled on top sand materials or granite dust. After the compaction process, movement in the work area can be resumed immediately.

Jasper is translated from Greek as a variegated, speckled stone. This beautiful stone is rock and consists mostly of quartz. It is believed that one who wears jasper jewelry may not be afraid of lightning and poisonous snakes, he will not be defeated either in disputes or in battles.

I want to tell you, dear colleagues and fellow soldiers, how I fixed a leak in an iron pit.
In this pit, located in the garage, we are in winter time they stored potatoes, carrots, beets, pickles and many other things that could not be stored under other conditions.
But it just so happened that my pit, after several years of use, started leaking in the spring. The garage was built on a swampy area, and the pit itself was welded from 3 mm thick metal by unscrupulous builders. At the same time, it was not treated with anything against corrosion on the outside before being immersed in the pit.
To prevent the pit with the remains of last year's harvest from flooding, we had to lift water from it with buckets every other day. Of course, this was very inconvenient and took a lot of time.
At first, water was seeping out of one hole and I thought about just welding that hole shut. Despite the fact that there was no electricity in the garage, renting a generator solved the problem with the source of electricity. But then another fistula appeared, then a third.
The holes were very small, but I understood that if I wanted to drive a screwdriver into them, I could do it without special effort– metal around holes with outside completely rotten.
I had to buy cold welding at the auto store. Moreover, from the offered assortment, I chose the one that allowed me to carry out work under water. After all, water was constantly leaking from the holes.
Before sealing the hole with welding, I sanded the area around it well with sandpaper. Having kneaded the warm weld in my hands until it became plasticine, I, before sealing the hole, forcefully smeared it over the treated area so that the weld would adhere well to the metal.
After that, I stuck a small bun of plastic welding onto the hole, covered it on top with newspaper, then with a small piece of thick plywood, and made a spacer on the plywood in the opposite wall of the hole. I prepared the spacer in advance from a metal strip 5 mm thick. Its length was approximately equal to the width of the pit.
It was necessary to support the area being sealed, because even a microscopic leak of water did not allow us to press tightly cold welding to the hole and welding without it either continued to let water through, or simply fell off the wall. A day later I removed the spacer. The newspaper placed in advance made it easy to separate the plywood from the weld.
I did the same with the rest of the fistulas. Now my pit is dry. True, I suspect that new holes will appear in the spring, but now I know how to deal with them.

Vasily Starukhin, especially for the site

.
But Any of you can fix the hated hole on the road! It's not difficult and doesn't take much time!
First, we need two tons of asphalt, look at GOST R 50597-93, it says: holes on the road should not be more than 15 cm (width) * 60 cm (length) * 5 cm (depth). those. if at least one parameter is exceeded, then this hole must be eliminated by road services!

Now the exciting part (what to do next?!):

If you see a hole on the road that clearly exceeds the GOST parameters, then remember the address where you can find this hole. For example, the hole in the first photo is located on Svetly Lane between houses No. 30 and No. 36

It is advisable to take a photo of the hole on your mobile phone, this will help the traffic police officers find it later.
And now is the time to grab shovels, just sit down at the computer and go to the traffic police website. there select the section: Contacts - Reception of requests

Select your region in the drop-down list (my option: 70 - Tomsk region)

Well, in the “Text of appeal” field itself, describe the problem, something like this:

At the address Tomsk street __________, damage to the road surface of dimensions __________ was discovered on the roadway, which exceeds the permissible size of potholes according to GOST R 50597-93.
I ask you to take measures to eliminate the damage to the roadway.

If you have a photo of the pit, then the site has the opportunity to attach a photo.
Click "Send" and that's it!

Now your message is considered officially accepted by the traffic police and department employees will begin the investigation of your application. First, they will inspect the section of the road you have indicated and, in case of violation, will issue an order to the responsible organization to eliminate the violation (in Tomsk this is the Tomsk City Department).
The traffic police will also take control of the removal of the hole and if the department does not repair the hole, it will be issued an administrative fine of 20,000 rubles. This is a very good amount, so it’s easier for the department to fill up the holes than to accumulate debts.

Remember: the traffic police does not fill potholes, but only issues instructions!!!

Not like that in a complicated way you can make your city a little better, and the roads a little smoother!

By the way, regarding my pit, it turned out to be an interesting story: at the end of last year, a certain Alexey Ivanovich wrote an appeal to the administration of the Leninsky district of Tomsk with a request to remove the pit. In January 2013, the administration of the Leninsky district promised that the hole would begin to be filled in the second quarter of 2013.

The work, naturally, did not begin, so I decided to write an appeal directly to the traffic police, already with attached screenshots of the responses from the Leninsky district administration, so we are waiting for the continuation of the story!