Help on Tele2, tariffs, questions

An old car disk, if desired - the opportunity to make a small barbecue for the garden. And by placing a grate on it, you can cook not only kebabs, but also use it as a grill.

Let's look at the idea of ​​a barbecue made from car disks from different angles.

The advantages of this idea:

• Thrift price;
• Takes up little space;
• Very easy work;
• Multifunctionality;
• Possibility to do it yourself.

Flaws:

• Few skewers fit;
• Round shape of the roasting pan.

Materials and tools

To make a grill from car rims you will need:

• Iron disc from a passenger car or small truck, with the largest possible diameter (R15-16 ‘);
• Profile pipe 20x20 or 25x25 mm;
• Wire 6-10 mm;
• Thermal paint for barbecues (in an aerosol can - very convenient);
• Lattice.

Tool:

• Welding machine;
• Grinder with cutting and grinding wheels, as well as a brush;
• Drill and drill bits.

How to do

We will consider a basic option that can be supplemented or reworked at your discretion.

Clean the car disk from rust and old paint. Doing this first will make the job easier.

1. There are many holes in the disc and some, if not most, will be too large. At this step, large holes are welded with scraps to avoid spillage of coal. Try to use metal 3-4 mm thick. There is no need to completely seal the bottom of the roasting pan. Leave holes for air.
2. The disk, if left as is, turns out to be a low grill. You need to weld 3 legs. Typically, pipe sections are welded directly to the disk. But if you have plans to transport this grill, then the legs need to be removable. To do this, larger pieces of pipe, plugged on one side, are welded to the wheel disk (the legs will be inserted into them, so check that they fit together).
3. To prevent the legs from sinking into loose soil from below, weld the nickels.
4. The disk is round, and this is inconvenient for skewers. The simplest solution is to weld two parallel pieces of pipe to fit the size of the skewer.
5. For ease of carrying, weld a couple of wire handles.
6. We recommend cutting the roasting rack to fit the roasting pan.
7. It's time to bring the disc grill to a decent appearance. Clean all elements down to metal using a grinder. Apply thermal paint. It is best if the paint is in aerosol cans. This is the final stage.

It will take a day to make a barbecue from a wheel rim. and it turns out almost for nothing. Its quality and appearance depend on your efforts.

A brazier made from car wheel rims is an excellent example of recycling waste materials. This device is easy to make on your own. The design is simple, but it can serve as a complex modification of the barbecue.

A stove for a cauldron made from wheel rims has many advantages:

• a person gets a full-fledged grill complex for almost free of charge;
• materials for production are available to every summer resident;
• the product will last a long time;
• the device will demonstrate its strength in any operating conditions;
• The barbecue made from wheels is compact.

The grill is made from scrap materials. You can take car wheels that you no longer need, and if you don’t have them, they are thrown away or sold for scrap for next to nothing. You only need 1 unnecessary wheel. It is in the arsenal of every motorist. But to build a homemade grill, you can ask for the material from friends, neighbors, or purchase it for a small amount from your own hands or at a service station. For example, lend a friend a jack, and he will give away the unnecessary wheel.

Making a barbecue with your own hands from a disk is good not only because it is profitable. Another important reason is the thickness of the material. Even when the wheels are no longer needed on the car, the metal itself still does not deform or burn out. It is no longer possible to use them for their intended purpose, but you can create a complex product for cooking over coals.

How does a homemade grill work?

According to the principle of operation, all barbecues are almost the same. In this regard, a barbecue made from rims will not differ much from those models that are made from a cylinder or barrel.

The devices provide the following capabilities:

1. Grill. A person can cook food on a removable grill or skewers.
2. B-B-Q. You can fry steaks if you add a lid to the device, which will create the effect of an oven.
3. Cooking surface. The grill made from wheel rims has a shape and diameter that allows you to place a frying pan, saucepan or cauldron.
4. Smokehouse. The devices are made so that you can prepare hot smoked dishes.

How it works? Ready-made coals or firewood are laid below. Place skewers or a grill on top. If you need to cook something in a container, place the containers on a wire rack or on a machine wheel, if the diameter is suitable.

Heat is released from below, due to which the air warms up, which means you can cook food. This is if a Dutch oven is used. And in order to smoke, they close the top exit. This will help make the wood chips smolder: there will be smoke - you can cook.

Each barbecue made from car wheels is thought out individually to take into account all the needs of the owners. But the basic manufacturing principles are the same for any modification.

Manufacturing options

Do-it-yourself devices made from car rims are as follows:

1. Ordinary grill. The wheel acts as a container for placing coals, and skewers or a grill are placed on top.
2. Double type design. Also made from car disks, but you will need 2 pieces. This way you can make the grill higher. The output is a kind of stand for a cauldron. Since heating is provided from different sides, you can cook like in an oven or stew dishes.
3. Closed furnace design. You can smoke food in it, because the smoke is inside the chamber and is gradually released through the existing holes.
4. Complex modification. These are all the functions discussed above. Additionally, a person can install a chimney.

Since you can make a grill with or without legs, you need to decide whether they are needed or not. It is also important to decide on the stand. Usually it is necessary for single modifications. In double and triple ones, a similar function is performed by the lower car disk.

Manufacturing Guide

Before you begin, you need to decide what scheme to use to carry out the work, whether it will be a barbecue or a cauldron oven. Next, they decide what consumables and in what quantity will be needed, and prepare the tools. You must be able to work with a grinder to cut metal and a welding machine.

What you will need:

• used car wheels;
• Bulgarian;
• drill;
• bolts;
• a nozzle designed for cutting metal;
• cleaning disc to remove rust;
• file;
• hammer;
• steel rod or profiled pipes;
• grill grate.

These tools are needed to process and combine the parts that make up the cauldron stove. You can make legs from pipes or rods. It is better if there are 4 supports - this will ensure greater stability of the structure. If you place a tripod, it may fall over if you place the device on an uneven surface.

The wheels are prepared in advance. If there are paint residues or rust on them, the surfaces should be cleaned with a wire brush.

How to make a simple grill design - single, on legs:

• the inner part, the partition, is cut out from one side to create a container resembling a cauldron;
• if there are many holes in the bottom or they are large, and then coal will fall out of them, you need to prepare an additional plate, but you must leave the possibility for air to flow through the coals so that the desired temperature is maintained;
• legs are welded on the side near the bottom or top, for example, 40-45 cm long.

If necessary, the cuts should be cleaned to avoid leaving sharp edges. Additionally, you can install a grille, but there is no need to weld it - it is more profitable if this part is removable.

To make it more convenient to maintain heat and clean out ashes, you can make a window on the side of the disk for firewood. For comfort when carrying, the structure is equipped with handles on the sides, which can be welded symmetrically.

If you take 2 or 3 units of a stamped wheel, then the metal bars can be welded to the bottom. In some cases, they do without special supports at all.

To make a barbecue, you can use an old disk from a cultivator or truck. It all depends on what the desired dimensions of the structure are.

Making a barbecue-smokehouse

For those who like to enjoy homemade sausages and balyks, it is worth creating a grill-smokehouse. You will need 2 wheels. Before making the grill itself, all excess is removed from the wheel rims, and then the elements are connected to form a solid structure.

To combine the disks, the partitions are cut off, then the wheels are joined and welded together with a continuous seam. The legs are welded to the bottom of the lower part. To provide access inside, create a door: run a grinder approximately in the center and cut out a rectangle. The door is secured by welding nuts symmetrically to the weld seam.

Homemade structures are the best solution for those who want to relax in peace at the dacha with barbecue and without spending a lot of money on equipment. All aspects of the work are easy to implement.

A design such as a barbecue made from car wheels is an excellent option for reusing waste materials. Such a device is simple to implement, and therefore you can make it yourself. Despite the simplest design, there are enough ways to use the product, it can even replace a complex barbecue model.

Design Features

A self-made grill from a wheel disk has a lot of positive characteristics. This design allows you to acquire a full-fledged grill complex with minimal manufacturing costs. All materials are quite accessible to almost any summer resident. In addition, they guarantee the durability of the product and its strength under any operating conditions. Another plus is the compactness of the grill. It is worth talking about its distinctive features and design options in more detail.

Video: instructions for making a barbecue from rims

Materials used

In order to make a barbecue from disks, you will not need to spend a lot of money, since practically available materials are used for its production. Car wheels that have already used up their useful life are usually thrown away or sold for scrap for pennies. This does not take into account the many ways to use them alternatively, among which making a barbecue is one of the best options.

For a dacha or private home, a barbecue is considered a mandatory attribute. Manufacturing from old disks allows you to save money, since ready-made models are often inferior to this option in terms of their capabilities in relation to the cost.

The onset of the cold season leads to the need for heating or simply creating comfortable microclimate parameters in garages or auxiliary buildings when living outside the city. This problem becomes especially urgent in conditions of impossibility of centralized heating.

Please note: almost every motorist has at least one unnecessary old wheel. Otherwise, you can find suitable material from friends, neighbors in the garage, or buy it for a small amount at a service station or secondhand.

The advantage of using discs to create a grill is the thickness of the metal. Even worn wheels will be suitable for this type of further use. The metal does not fade or deform, and their shape is ideal for creating complex products for cooking on coals.

Principle of operation

The operating principle of a barbecue made from wheel rims is similar to some other homemade models, for example, those made from a barrel or a cylinder. It combines the following features:

• grill - allows you to cook on skewers or a removable grill;
• barbecue - for frying steaks, complemented by a lid that creates the effect of an oven;
• hob - the shape and diameter of the disk allows you to place a cauldron, frying pan or saucepan on the fire;
• smokehouse - some models allow you to hot smoke food.

The principle of operation is extremely simple. Firewood or finished coals are loaded into the lower part. A grate is installed on top or skewers are placed. The dishes can also be placed on the wire rack or directly on the wheel, if their diameter is compatible. The heat from below warms the air and allows you to cook as on a regular grill. To smoke, you need to close the top exit and allow the wood chips to smolder to create smoke.

Each design is thought out individually, tailored to the needs of the owners. However, the main part of the work on manufacturing the product remains common to all models.

Execution options

It is necessary to consider in more detail the possible design options for the product. If you want to make a grill from car rims, you need to pay attention to the following models:

• Simple grill. The wheel is a container for coals on which skewers or a grate are placed (We recommend studying the material on our website).

The simplest option is a grill for skewers

• Double design. 2 wheels are used, thanks to which the grill becomes higher. Due to this, you can put a cauldron on top. Heating from all sides allows you to cook delicious dishes in it, like in the oven or stew them.
• Closed oven. Allows you to smoke food, as the smoke collects inside the chamber and is released in small quantities through special openings.
• Complex models. It combines all 4 functions of the product described earlier. Additionally, other useful elements can be installed, for example, a chimney exhaust.

It is also worth noting that such a grill can be made with or without legs. A stand will be needed for single models, but in double and triple models its function is performed by the lower disk. However, there are restrictions regarding the use of the structure, because wet soil can prevent the formation of heat, and hot metal is not allowed to come into contact with the wooden floor on the terrace.

Making a barbecue from disks yourself

In order to make your own grill from car disks, you need to think in advance about the design of the future product. Decide on the amount of consumables and prepare the tools. To perform high-quality work, you must have the skills to use a grinder for cutting metal, as well as a welding machine.

Preparation of materials and necessary tools

In order to make a barbecue from rims with your own hands, you will need the following materials and tools:

• old car wheels;
• Bulgarian;
• nozzle for cutting metal;
• disc for removing rust in the form of an iron brush;
• file;
• drill;
• hammer;
• bolts;
• profiled pipes or steel rod;
• grill grate.

A grinder and a welding machine are the main tools when working with metal.

All these tools will be needed to process and connect the parts of the grill. It is convenient to make legs from profiled pipes and rods. In total you will need 3-4 of them.

Tip: it is better to make 4 supports for greater stability of the product. The tripod may fall to one side when placed on an uneven surface.

You need to prepare the wheels themselves in advance. If there are traces of rust and paint, clean the surface with a metal brush using a grinder or drill. All excess is cut off.

Simple option

Several options for manufacturing such grill structures should be considered. You need to start with the simplest thing - a single barbecue made from a wheel disk on legs. In order to do it, you will initially need to carry out a number of manipulations with the disk itself:

1. On one side, the inner part is cut out - the partition. A container similar to a cauldron is formed.
2. If there are too many holes in the bottom or they are large enough for coals to spill through them, you need to weld an additional plate. You should not completely close the gaps, since the coals must be blown out to maintain heat.
3. Legs are welded on the sides to the bottom or closer to the top. Usually they are made 40-45 cm in length. This height of the barbecue is optimal, as it ensures the stability of the structure and ease of use.

Next, if necessary, you need to clean the cuts so that there are no sharp edges left. You can additionally install a grille. It is not necessary to weld it; it is more profitable to use removable parts. Also, for the convenience of maintaining heat and cleaning out ashes, you can make a window for firewood on the side of the disk. For transfer, the structure is equipped with handles, welding them symmetrically on the sides of the wheel.

Tip: if you use two or three wheels, you can limit yourself to welding metal bars to the bottom. In some cases, you can do without supports altogether.

Smoking chamber

It is more profitable to make a brazier from car rims that can be used in different directions. For lovers of homemade balyk and sausages, a smokehouse will be an indispensable device. In order to turn old wheels into such a useful thing, you need to use at least two units of material.

The principle of operation is that you need to connect two disks into a solid hollow structure. The top can be adapted for frying kebabs according to the principle of the previous model, but to preserve the smoke you need to take care of the arrangement of the lid and smoke exhaust system. You can leave the partition with holes, which will simplify the task, and use the product as a hob.

Structural and functional features of the grill-steam locomotive, cost of the product, selection of materials for self-production, construction installation technology.

In order to combine two disks, it is necessary to cut off the partitions. Next, the wheels are joined and welded with a continuous seam to each other. The legs are welded to the bottom of the lower element. A door is equipped to provide access inside. To make it, you need to go through the grinder approximately in the middle of the product and cut out a rectangle.

To secure the door, one nut at a time is welded to it, symmetrically with respect to the welding seam. One bolt is also attached to the barbecue by welding so that the door nuts can be put on them.

Tip: to secure the sash without any problems, first screw the bolts into the already welded nuts. Then the door is applied to the opening and fixed on the structure itself.

Such homemade barbecues allow you to create all the conditions for relaxing with barbecue with minimal costs for equipment. In addition, there is no need to apply any extra effort, because all stages of the work are extremely clear and easy to implement.

We present to your attention an interesting idea for making a barbecue from a car disk. The author of the idea claims that the use of the disk is justified by the fact that it is ideal because it has thick metal walls. Thanks to this, the grill will not quickly burn out from hot coals.

So, to make a barbecue from a car disk, we will need:
- car disk;
- square grid 40 by 40 cm;
- three metal rods with an 8 thread at the end;
- square metal sheet measuring 250 by 250 mm and 4-5 mm thick;
- welding machine.

First of all, we must weld a metal disk on the outside of the disk so that the hot corners do not fall through the large holes in the disk.

Let's move on to the next stage. At this step, lightly tighten the nuts to weld them at the locations of the grill legs. The author claims that it is important to lightly tighten the nuts, and not tighten them completely, in order to get removable legs without welding the rods to the structure.

The grill is almost ready. All that remains is to prepare the grid. To do this, put the grid on the disk, take a marker, and trace the excess part with a grinder.

Our grill is ready. The corners must be placed in the disc. The holes that remain after welding the metal plate will help blow out the coals. Finally, the grill can be used without a grid, placing skewers with meat on it, or as an apparatus for making a barbecue. In this case, you can put the cut out mesh in the rim of the disc and enjoy a delicious barbecue.

It is difficult for car owners to part with old rims. What if they come in handy! And they lie in garages and dachas, waiting for their finest hour. And now it has come! There is a great idea to use wheel rims for a barbecue. A specialist with golden hands will easily put together a useful item for himself and will enjoy the quiet summer evenings with the aroma of fried kebabs or pilaf. The family is happy, money is saved in the family budget. And if the master also has a good imagination, then the wheels turn into amazing masterpieces

Peculiarities

To make a homemade grill from disks, you don’t need to go somewhere special to the market and buy expensive materials. All car owners have rims. You can go to any auto repair shop; the craftsmen will be happy to provide you with a pair of used wheels. It is worth noting the durability of the material and strength. It is unlikely that you will find a dent or scratch on the disc due to the thickness of the metal.

The shape of the discs is ideal for turning into a barbecue. The work on its manufacture takes literally a couple of hours. Only available materials are used. The product is compact and can be easily moved. The design holds the heat of the fire remarkably well, on par with products from well-known brands. This grill can be used for other purposes. It will easily fit into hunting or fishing conditions, becoming a camp kitchen for a while. And here the range of dishes is different - fish soup, pilaf, stewed potatoes and much more.

The design of the firebox ensures the flow of air, which maintains the required heat temperature. A homemade grill is easy to clean after cooking. It does not burn out, withstanding fire for several hours.

Advantages and disadvantages

Even a child can figure out how the grill works. Coals are placed in the lower level. A traditional grill grate and utensils are placed on top. You can do without this and fry traditional meat on skewers.

The heat comes from below, the cooking conditions are the same as on a regular grill. When smoking, it is necessary to close the top exit. This will allow the wood to smolder and create smoke. Each owner makes a barbecue for himself, but the main work on its production remains common.

With all the advantages, there are also disadvantages. One of them is low height. Cooking is too low. The traction may not be enough, and the grill may simply go out. Another disadvantage is the small volume of the firebox. Many users compare the design capabilities with camping bricks, which are used as stands for skewers. But this, of course, is not entirely true.

Kinds

The world of homemade barbecues is diverse. Craftsmen turn barrels and cylinders into braziers.

The grill made from car disks offers the following functionality:

• cooking kebab skewers or grill;
• B-B-Q;
• cooking in a bowl. A cauldron is usually used;
• smokehouse.

For a summer residence, such a grill is an ideal option.

Form

There are several options for making barbecues. The simplest model is called a simple grill. Nothing complicated here. Coals are placed in the wheel, and everything on top is optional: skewers with kebab or meat on the grill.

The double design has more options. Due to the use of two wheels, the product becomes taller. A cauldron is placed on top. There is uniform heating, which ensures extinguishing. You can smoke food in a closed oven. The smoke remains inside the structure and is discharged through a special outlet.

There are universal models. You can do everything with them: kebabs, dishes in a cauldron, smoking. This grill can be with or without legs. For a barbecue with one disk, a stand is required. Double and triple barbecues can easily do without it. The lower disk becomes the very stand. There are restrictions when using this barbecue. If the ground is after rain or snow, it will prevent the formation of heat. You cannot place a barbecue on a wooden floor.

Before making a barbecue, you need to think about its layout and what functions you need to get from it. After determining the number of disks, you need to prepare the tools. You will need skills in using a grinder and a welding machine.

Materials

Despite the simplicity of making a barbecue, there are questions regarding the choice of disks. Which machine is best to use? Finding wheels is not a problem. Any tire shop will be happy to share its surplus rims. Experienced drivers believe that truck wheels are best suited. The best option is considered to be wheels from KAMAZ wheels. They are made of thick metal and will not burn out for up to 40 years. The same can be said about disks from any freight transport. But a disc, for example, from a minibus will last up to 20 years.

In principle, the wheels of any car are suitable for the role of a barbecue. It is made from stamped car wheels. They are made from high quality steel. The service life of the grill depends on the fuel. Coal makes the product burn out faster.

The idea of ​​a barbecue made from car rims quickly spread across the country and many began to think about its implementation.

Equipment

Before starting welding, it is necessary to inspect everything necessary.

It is necessary to prepare the following equipment and tools:

• rims;
• iron brush for removing rust;
• Bulgarian saw;
• welding machine;
• drill;
• hammer;
• bolts;
• file;
• nozzle for cutting metal;
• steel rod (profile pipes are possible).

The latter will go on the legs under the grill. Four supports are recommended for stability. A three-legged device may collapse on an uneven surface. Rust must be removed from the discs. The surface should be processed with a Bulgarian saw. Installation is carried out by welding.

How to assemble it yourself?

All work is carried out in compliance with safety regulations. Be sure to use personal protective equipment. When welding, eyes must be covered with goggles or a mask, and work must be performed only in special gloves. When working with an angle grinder, its disk must be held at a right angle to the object. Otherwise, the disk may bite and its fragments will fly. Carry out work only with special glasses.

It’s worth starting with the simplest model – a single circle on a stand.

To create such a product, you must perform the following steps:

• the internal partition is cut out. After which the workpiece becomes like a barrel;
• There are discs with a large number of holes, then they need to be closed;
• the plate should be welded, but gaps should be left for blowing out the coals;
• The legs must be secured to the sides of the bottom by welding. Their optimal length is up to 45 cm;

• then you need to clean the cuts. Make a window in the side to monitor the fire and clean out the contents of the structure;
• It is best to leave the frying grid removable;
• All that remains is to weld the handles. This will add comfort when using the barbecue.

Another option for a do-it-yourself grill is a smokehouse. You will need two disks. This option can be considered universal. You can use it not only to cook kebabs, but also to grill and stew food.

The work is simple and includes the following steps:

• it is necessary to connect two spare parts into one whole;
• in order to preserve the smoke, a lid and an exhaust system are needed, so a partition must be left in the upper disk;
• the lower disk should be removed from the partition, using a welding machine, join both disks to each other;
• the legs need to be welded;
• a door must be made in the middle of the lower disk;
• Upon completion of the work, be sure to calcine the structure. This will clear it of gasoline and oil;
• To make the product presentable, you need to coat it with durable thermal paint.

Before this, you need to remove any remaining rust. This can be done with a stiff brush or using a special drill attachment. It wouldn’t hurt to go over the sides of the grill again with sandpaper, then degrease it and you can start painting.

You can come up with many options with barbecues, especially in terms of design. They are all original and always arouse interest. But there is so much sincere joy for those around them when they find out that the barbecue was made with their own hands from ordinary disks.